Abstract:A fast liquid mixing process was implemented by the cross-flow impingement of thin liquid sheets in the confined mixing channels with the width of millimeter(s). The species transport between the two liquids was studied by visualizing the 2-D concentration field of Rhodamine dye with the planar laser induced fluorescence (PLIF) technique, on which the intensity of segregation (IOS) and the 95% mixing time (τ95) were calculated to evaluate the mixing quality. Due to the reduced spatial scale of liquid mixing and the high energy dissipation rate of ∼1000 to ∼10000W/kg produced by the strong impingement between the liquid sheets, fast mixing of liquids was achieved at a time scale of milliseconds. The effects of operating conditions and the mixer geometry on the mixing behavior were investigated comprehensively by both experiments and computational fluid dynamics (CFD) simulations. Good agreement of the CFD predictions with the experimental data was obtained by the k–ɛ model with species transport, where dependence of the CFD predictions on the turbulent Schmidt number (i.e. Sct) was discussed in detail. The results show that for this turbulence-induced mixing procedure the momentum ratio and the cross-flow angle between the two liquids play significant roles in the mixing efficiency. The absolute liquid velocity has little effect on the species transport in space, i.e. the mixing distance to reach IOS of 5%. Nevertheless, the mixing time is shortened at higher velocity conditions. The fluctuation of the transient concentration signals shows stronger interaction at the interface between the two liquid sheets. And the local concentration fluctuations can be well described by the β-PDF (probability density function) model.

A numerical study on the mixing time prediction of miscible liquids with high viscosity ratios in turbulently stirred vessels

Investigation of mixing miscible liquids with high viscosity contrasts in turbulently stirred vessels using electrical resistance tomography

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

Numerical simulation of macro-mixing in liquid-liquid stirred tanks

Numerical Simulation of Turbulent Flow and Mixing in Gas-Liquid-Liquid Stirred Tanks

Millisecond Mixing of Two Liquid Streams in a Mixer Model

Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor

Experimental determination and numerical simulation of mixing time in a gas–liquid stirred tank

Numerical simulation on low-density solid-liquid mixing process

Numerical Simulation of Dense Solid-Liquid Mixing in Stirred Vessel with Improved Dual Axial Impeller

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Mixing Time Prediction in a Ladle Furnace

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Direct numerical simulation of water-ethanol flows in a T-mixer

Numerical Simulation of Mixing in Complex Reaction System via Computational Fluid Dynamics

Fast liquid mixing by cross-flow impingement in millimeter channels

Computational study of convective–diffusive mixing in a microchannel mixer

Multi-dimensional analysis of turbulence models for immiscible liquid-liquid mixing in stirred tank based on numerical simulation

Prediction of the viscosity of solid–liquid mixtures using a virtual viscometer based on computational fluid dynamics

Improved mixing of solid suspensions in stirred tanks with interface baffles: CFD simulation and experimental validation