Improvement of process design for turbine energy recovery device under variable salinity conditions and its application: a case study
Xiaoli Wang,Shenghui Wang,Chengpeng Wang,Pengfei Huang,Daiwang Song,Yin Zhang,Lidong Jiang,Shixian Ma
DOI: https://doi.org/10.1080/15567036.2024.2368501
2024-06-27
Energy Sources Part A Recovery Utilization and Environmental Effects
Abstract:In order to promote energy efficiency, reverse osmosis (RO) systems are equipped with energy recovery devices (ERDs), which mostly work under stable inflow conditions. However, the inlet salinity in estuarine area fluctuates with seasons and river discharge. Traditional processes choose to add the number of high-pressure (HP) pumps to fit this situation, which brings problems of high capital cost, complex operation, and low device utilization. To overcome these drawbacks, an improved design of turbine ERD was proposed in this paper through real-time monitoring of salinity and automatic regulation of bypass valve. By controlling the opening, the ERD booster pressure could be adjusted, thereby obtaining corresponding pressures before the membrane for changeable salinities. A comparison of effective energy conversion efficiency (EECE), specific energy consumption (SEC), capital cost, and water production cost was conducted between conventional and optimized processes. Sanjiao Island RO plant operation indicated that the improvement could adapt to the fluctuation of inlet salinity. Compared to traditional process, it saved 55.7% of capital cost and 21.7% of water production cost, with EECE of 76.62–80.68% and SEC of 1.58–2.57 kWh/m 3 . When inflow salinity changed from 12,379 to 28,874 mg/L, the salt rejection of the primary reverse osmosis system (PROS) remained over 99.4%.
energy & fuels,engineering, chemical