Abstract:Despite the physicochemical advantages of two-dimensional (2D) carbons for supercapacitors, the inappropriate texture within 2D carbon materials suppresses the charge storage capability. Reported here are heteroatom-rich carbon sheets with the overall network engineered by molecular structure modulation and subsequent chemical activation of a three-dimensional (3D) cross-linked polymer. The 3D-to-2D reconstruction mechanism is unveiled. The architecture with a large active surface, fully interpenetrating and conductive network, and rich surface heteroatoms relieves well the ionic diffusion restriction within thick sheets and reduces the overall resistance, exhibiting fast transport kinetics and excellent stability. Indeed, high gravimetric capacitance (281.1 F g–1 at 0.5 A g–1), ultrahigh retention rate (92.5% at 100 A g–1), and impressive cyclability (89.7% retention after 20 000 cycles) are achieved by this material. It also possesses a high areal capacitance of 3.56 F cm–2 at 0.5 A g–1 under a high loading of 25 mg cm–2. When coupled with the developed dual cross-linked hydrogel electrolyte (Al-alginate/poly(acrylamide)/sodium sulfate), a quasi-solid-state supercapacitor delivers an energy density of 28.3 Wh kg–1 at 250.1 W kg–1, which is significantly higher than those of some reported aqueous carbon-based symmetric devices. Moreover, the device displays excellent durability over 10 000 charge/discharge cycles. The proposed cross-linked polymer strategy provides an efficient platform for constructing dynamics-favorable carbon architectures and attractive hydrogel electrolytes toward improved energy supply devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16985?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16985</a>.SEM images of MF-2 and MF-2-derived samples obtained under different pyrolysis temperatures; XPS survey spectra of AMFC-1, AMFC-2, AMFC-3, and AMFC-4; IR drop results of AMFC-2 at different current densities; GCD curves at 1–100 A g–1 for AMFC-1, AMFC-3, and AMFC-4; comparison of the capacitance and rate capability of AMFC-2 and other electrode materials tested by a three-electrode setup; Nyquist plots of AMFC-1, AMFC-3, and AMFC-4 with the enlarged plots; and electrochemical properties of the alkaline QSSC device with the Al-SA/PAAm/KOH hydrogel electrolyte (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16985/suppl_file/am0c16985_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fe3O4/graphene-oxide/chitosan hybrid aerogel based high performance supercapacitor: effect of aqueous electrolytes on storage capacity & cell stability

Graphene Aerogel Derived by Purification-Free Graphite Oxide for High Performance Supercapacitor Electrodes

Carbon Nanotube Spaced Graphene Aerogels with Enhanced Capacitance in Aqueous and Ionic Liquid Electrolytes

High-rate, Flexible All-Solid-state Super-Capacitor Based on Porous Aerogel Hybrids of MoS2/reduced Graphene Oxide

Three-dimensional Chitosan/graphene Aerogel with Vertical Alignment for High-Performance All-Solid-state Supercapacitors

A Few-Layered MoS2 Nanosheets/nitrogen-Doped Graphene 3D Aerogel As a High Performance and Long-Term Stability Supercapacitor Electrode.

Robust cobalt phthalocyanine-based covalent organic framework/chitosan aerogel for high-performance supercapacitor

Electrolyte impact on supercapacitors made off Ni2O3-Ni2S3 decorating graphitic carbon nitride

Fabrication of aqueous asymmetric supercapacitor device by using spinel type (FeCoNiCuZn)3O4 high entropy oxide and green carbon derived from plastic wastes

Self-Assembled Graphene/Polyaniline/Co3O4 Ternary Hybrid Aerogels for Supercapacitors

CoFe2O4@methyl cellulose core-shell nanostructure and their hybrids with functionalized graphene aerogel for high performance asymmetric supercapacitor

NiCo layered double hydroxide/biomass-derived porous carbon aerogel composite for high-performance hybrid supercapacitors

Biomass-Derived Sponge-like Carbonaceous Hydrogels and Aerogels for Supercapacitors

Design and Fabrication of Advanced Cathode and Anode Materials for Hybrid Supercapacitors Based on Graphitic Carbon Quantum Dot-Decorated Reduced Graphene Oxide Composite Aerogels

Engineering Kinetics-Favorable Carbon Sheets with an Intrinsic Network for a Superior Supercapacitor Containing a Dual Cross-linked Hydrogel Electrolyte

Intertwined Nanocarbon and Manganese Oxide Hybrid Foam for High-Energy Supercapacitors.

High Specific Surface Area MXene/SWCNT/cellulose Nanofiber Aerogel Film As an Electrode for Flexible Supercapacitors

Deposition of Three-Dimensional Graphene Aerogel on Nickel Foam As a Binder-Free Supercapacitor Electrode.

Nanocellulose/nitrogen and fluorine co-doped graphene composite hydrogels for high-performance supercapacitors

Chitosan/graphene oxide hybrid hydrogel electrode with porous network boosting ultrahigh energy density flexible supercapacitor

Manganese oxide/nitrogen-doped carbon aerogels from cellulose nanofibrils for high-performance supercapacitor electrodes