Abstract:The growing demand to shift energy production to sustainable sources poses some serious challenges. One of the biggest are the intermittent energy (wind and sun). To mitigate this issue, there is a critical need for large energy storage technologies, to store excess energy during the peak hours and carry it over for the rest of the day, weeks, and seasons. The best way to do so is through the Hydrogen Economy. At the heart of this scheme is green hydrogen production using water electrolysis. There are two distinct chemical reactions that take place in water electrolyzers: the cathodic hydrogen evolution reaction (HER), and the anodic oxygen evolution reaction (OER). Both reaction require catalysts to execute at high rates, and while the HER is considered to be relatively facile and takes place at low overpotentials, the OER requires relatively high overpotentials and high loadings of precious metal catalysts. It is considered the bottleneck reaction. The OER is a four electrons oxidation reaction per generated O 2 molecule and proceeds in four distinct reaction steps. This leads to a very sluggish reaction kinetics and high overpotentials to reach viable current densities. In recent years, more and more non-precious metal OER catalyst have been developed. Most notably is the family of mixed nickel-iron oxyhydroxides (NiFeOOH), which are relatively cheap, selective and efficient catalysts in alkaline media, and their performance has been increased by optimizing the Ni:Fe ratio. One challenge that still remains is to increase the NiFeOOH surface area, and by that the electrochemically active site density (EASD). In this regard, one class of materials that has been attracting the attention of materials’ scientists in recent years are aerogels. Aerogels can be made from many different materials, such as silicates, carbons, metal organic materials, bio-inspired molecules, metals, and metal oxides. They consist of distinct units which form a porous 3D covalent framework (COF). Because of their diversity, aerogels have many different applications, e.g. as insulators, sensors, or catalysts. In this talk we will report the synthesis of Ni x Fe y M z OOH aerogels, with a modified easy synthetic method via an epoxide route. These aerogels show much higher utilization of the material and overall increase in mass activity when catalyzing the OER when compared to other NiFeOOH derived materials. They were tested for their OER electrocatalytic activity and to the best of our knowledge these are the first aerogel materials that propagate OER themselves, rather than being used merely as support material for OER catalysts. The catalytic activity depends largely on the Ni:Fe ratio and not the surface area, which can lead to mass transport limitations when too high, showing an optimum for the ratio and the surface area.

Ultrafast Generation of Nanostructured Noble Metal Aerogels by a Microwave Method for Electrocatalytic Hydrogen Evolution and Ethanol Oxidation

Noble metal aerogels rapidly synthesized by ultrasound for electrocatalytic reaction

Controllable electrostatic manipulation of structure building blocks in noble metal aerogels

Short‐Range Diffusion Enables General Synthesis of Medium‐Entropy Alloy Aerogels

Au aerogel for selective CO 2 electroreduction to CO: ultrafast preparation with high performance

Au Aerogel for Selective CO2electroreduction to CO: Ultrafast Preparation with High Performance.

Single-crystalline Ultrathin Nanofilms of Ni Aerogel with Ni(OH)2 Hybrid Nanoparticles Towards Enhanced Catalytic Performance for Ethanol Electro-Oxidation

Nickel–Cobalt Aerogel as a Highly Efficient Electrocatalyst for Dual Microfluidic Applications: Hydrogen Generation and Power Energy from Nitrogenous Compounds

A Highly Compressible, Elastic, and Air‐Dryable Metallic Aerogels Via Magnetic Field‐Assisted Synthesis

(Keynote) Development of Advanced High Surface Area Metal Oxide Aerogels for Oxygen Evolution Reaction Electrocatalysis

Polymer‐Confined Pyrolysis Promotes the Formation of Ultrafine Single‐Phase High‐Entropy Alloys: A Promising Electrocatalyst for Oxidation of Nitrogen

Controllable Synthesis of Pt-rich Shell/mx Core [M = Ni, Fe, Co] Metal Aerogels As Efficient Electrocatalysts for Hydrogen Evolution Reaction

Synthesis of Three-Dimensional Nitrogen and Sulfur Dual-Doped Graphene Aerogels As an Efficient Metal-Free Electrocatalyst for the Oxygen Reduction Reaction

A Stabilization Synthesis Strategy for Atomically Dispersed Metal-N4 Electrocatalysts Via Aerogel Confinement and Ammonia Pyrolyzing

Highly Conductive and Mechanically Robust NiFe Alloy Aerogels: An Exceptionally Active and Durable Water Oxidation Catalyst

Controllable synthesis of Pt-rich shell/M x core [M = Ni, Fe, Co] metal aerogels as efficient electrocatalysts for hydrogen evolution reaction

Electronic Modulation of the 3D Architectured Ni/Fe Oxyhydroxide Anchored N-Doped Carbon Aerogel with Much Improved OER Activity

Controllable Microwave Heating for Energy‐Efficient and Universal Synthesis of Atomically Dispersed Metals on Nitrogen‐Doped Carbon Nanofibers

Preparation and Electrocatalysis Application of Pure Metallic Aerogel: A Review

Electrothermally-Driven Ultrafast Chemical Modulation of Multifunctional Nanocarbon Aerogels

Crystal‐Phase‐Engineered High‐Entropy Alloy Aerogels for Enhanced Ethylamine Electrosynthesis from Acetonitrile