Automatic microdispenser-integrated multiplex enzyme-linked immunosorbent assay device with autonomously driven centrifugal microfluidic system

Shunya Okamoto,Moeto Nagai,Takayuki Shibata,Yoshiaki Ukita
DOI: https://doi.org/10.1039/d4ra02656j
IF: 4.036
2024-04-27
RSC Advances
Abstract:In this study, we established the control and design theory of an autonomously driven dispenser at a steady rotation speed and proposed a dispenser-integrated multiplex enzyme-linked immunosorbent assay (ELISA) device. In establishing the theory of the dispenser, we estimated the flow rate in the dispenser and the applied pressure onto the passive valves, so that the suitable burst pressure of the valves and flow rate could be designed. The dispenser-integrated multiplex ELISA device has the potential to perform flow control for executing an ELISA of 6 samples/standards per chip or 18 samples/standards per compact disk by just steadily rotating a chip. In the immunoassay evaluation of the device using mouse IgG detection, it was confirmed that the device could assay 5 μL of several standards in just 30 min without nonspecific reactions, and although this system has a high limit of detection (LOD, 63.4–164 pg mL −1 ) it is equal to that of manual assay with a titer plate. The device can be fabricated by transferring the microchannel pattern from a mold without complex assembly or alignment, and it can control the liquid operation by just steadily rotating. Thus, the device system developed will contribute to reducing the cost of fabricating chips and control equipment for ELISA systems. Consequently, a compact, portable, and low-cost ELISA system for point-of-care testing is expected to be realized.
chemistry, multidisciplinary
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to realize the automation and integration of enzyme - linked immunosorbent assay (ELISA) in point - of - care testing (POCT). Specifically, the paper proposes a multiplex ELISA device integrated with an automatic microfluidic disperser, which can be autonomously driven at a constant rotation speed, thereby simplifying the operation process, reducing costs, and improving detection efficiency. ### Main Problems and Solutions 1. **Challenges in the Application of ELISA in POCT**: - **Complex Operations**: Traditional ELISA requires complex washing steps, which are difficult to achieve in the POCT environment. - **Environmental Conditions**: POCT requires sample detection and calibration curve preparation under different environmental conditions, which increases the complexity and cost of the system. - **User Burden**: Users need to manually load reagents, which not only increases the difficulty of operation but also may lead to errors. 2. **Proposed Solutions**: - **Automatic Microfluidic Disperser**: A microfluidic disperser that can be autonomously driven at a constant rotation speed is designed. By controlling the liquid flow rate and pressure, precise liquid dispensing is achieved. - **Multiplex ELISA Device**: The CLOCK circuit and the automatic microfluidic disperser are integrated, which can process multiple samples or standards simultaneously on a single chip, reducing the user's operation burden. - **Simplified Operation**: By driving the system at a constant rotation speed, the instability and complexity caused by switching the rotation speed are avoided, and the stability and reliability of the system are improved. ### Technical Details - **Working Principle of the Microfluidic Disperser**: - **Metering Stage**: The liquid is loaded into the upstream metering chamber and simultaneously injected into the target chamber through the supply channel. - **Injection Stage**: When the water level rises to a certain height, the passive valve opens and the liquid is rapidly injected into the target chamber. - **Pressure Control**: By designing appropriate valve burst pressure and liquid flow rate, precise liquid distribution is ensured. - **Experimental Verification**: - **Flow and Pressure Estimation**: The accuracy of the theoretical model is verified by experimentally measuring the liquid flow rate and pressure at different rotation speeds. - **Performance Evaluation of the Multiplex ELISA Device**: Using fluorescent labeling and color - developing reactions, the performance of the device in actual ELISA detection is verified. The results show that the device can complete the standard detection of 6 samples within 30 minutes, and the detection limit is comparable to that of manual operation. ### Conclusion This research has successfully developed a multiplex ELISA device integrated with an automatic microfluidic disperser, which can be autonomously driven at a constant rotation speed, realizing the automation and integration of ELISA. This device is expected to achieve rapid, portable, and low - cost detection in POCT, improving the diagnosis efficiency and the quality of life of patients.