Abstract:Lignin is an abundant source of aromatics with low effective hydrogen-to-carbon ratio (H/Ceff), and the depolymerization of lignin provides significant potential for producing liquid products with an improved H/Ceff value. In this work, the catalytic conversion of lignin monomers, dimer, trimers, and realistic lignin over spherical MOF-derived catalysts was well established, to get liquid fuels with a higher H/Ceff. The optimal ratio of the catalyst exhibited good hydrodeoxygenation activity and stability for the hydrotreatment of lignin model compounds and lignin. The addition of Mo facilitated the decrease of the particle size of a spherical structure, strengthened the electron-transfer capability between metals Mo and Ni, and enhanced the acid strength. All of these factors contributed to higher hydrodeoxygenation activity in the hydrotreatment process. Up to 100% conversion and 90% yields of ethylcyclohexane and cyclohexanol with H/Ceff values of 2.0 and 1.667, respectively, were obtained. The catalyst achieved a decrease of the oxygen element and an increase of H/Ceff and HHV values. The physicochemical characterizations were performed by various means including X-ray diffraction (XRD), scanning electronic microscopy (SEM), transmission electron microscopy (TEM), H2-temperature-programmed reduction (H2-TPR), NH3-temperature-programmed desorption (NH3-TPD), pyridine-infrared spectroscopy (Py-IR), inductively coupled plasma emission spectrometer (ICP), and Raman and X-ray photoelectron spectroscopy (XPS) analyses, which definitely elucidated the formation of a synergistic effect between metals Mo and Ni. Additionally, a control experiment also illustrated the synergistic effect that facilitated the occurrence of the hydrotreatment process under lower temperatures after the addition of metal Mo. Based on the optimal reaction condition (240 °C, 4 h, 2.0 MPa H2), both lignin and its monomers/dimers/trimers could be effectively hydrotreated to afford liquid products with improved H/Ceff value compared to raw lignin.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c05273.Py-IR spectra of different catalysts (Figure S1); mass balance of hydrogenation under the optimal reaction condition (Figure S2); GC-MS results and product distributions of bio-oil from different lignin feedstocks (Figure S3); and recycling experiments of different lignin feedstocks (Table S1) (PDF)This article has not yet been cited by other publications.

Enhanced lignin depolymerization to produce butylated hydroxytoluene and 4-propylguaiacol on carbon-nitride-supported molybdenum catalysts

Catalytic depolymerization of Kraft lignin towards liquid fuels over bifunctional molybdenum oxide based supported catalyst

Catalytic Hydropyrolysis of Lignin Using NiMo-doped Catalysts: Catalyst Evaluation and Mechanism Analysis

Efficient Lignin Depolymerization Process for Phenolic Products with Lignin-Based Catalysts and Mixed Solvents

Catalytic Conversion of Lignin to Liquid Fuels with an Improved H/C eff Value over Bimetallic NiMo-MOF-Derived Catalysts

Fabrication and application of amphiphilic polyoxometalate catalyst (CTA)nH5-nPMo10V2O40 for transformation of lignin into aromatic chemicals

Effect of Mo content in Mo/Sepiolite catalyst on catalytic depolymerization of Kraft lignin under supercritical ethanol

Lignin carbon-initiated Ni/K/Mo 2 C catalyst for efficient synthesis of higher alcohols from syngas

Conversion of Kraft lignin to phenol monomers and liquid fuel over trimetallic catalyst W-Ni-Mo/sepiolite under supercritical ethanol

Selective Catalytic Transfer Hydrogenation of Lignin to Alkyl Guaiacols Over NiMo/Al-MCM-41

M-Gallate (M = Ni, Co) Metal–Organic Framework-Derived Ni/C and Bimetallic Ni–Co/C Catalysts for Lignin Conversion into Monophenols

Oxidative Catalytic Depolymerization of Lignin into Value-Added Monophenols by Carbon Nanotube-Supported Cu-Based Catalysts

Catalytic depolymerization of lignin via transfer hydrogenation strategy over skeletal CuZnAl catalyst

Enhancing aromatic hydrocarbon formation via catalytic depolymerization of lignin waste over Ru/WOx/N-C catalyst

MOFs-derived carbon-covered nickel phosphide for catalytic transfer hydrodeoxygenation of lignin-derived vanillin

Lignin catalytic depolymerization for liquid fuel and phenols by using Mo/sepiolite catalysts calcined at different temperature

Catalytic depolymerization of the dealkaline lignin over Co–Mo–S catalysts in supercritical ethanol

Efficient depolymerization of alkali lignin to monophenols using one-step synthesized Cu–Ni bimetallic catalysts inlaid in homologous biochar

An efficient way to synthesize biomass-based molybdenum carbide catalyst via pyrolysis carbonization and its application for lignin catalytic pyrolysis

Catalytic Hydrodeoxygenation of Guaiacol to Cyclohexanol over Bimetallic NiMo-MOF-Derived Catalysts

Catalytic conversion of enzymatic hydrolysis lignin into cycloalkanes over a gamma-alumina supported nickel molybdenum alloy catalyst