Abstract:Abstract In deep underground mining, achieving stable support for roadways along with long service life is critical and the complex geological environment at such depths frequently presents a major challenge. Owing to the coupling action of multiple factors such as deep high stress, adjacent faults, cross-layer design, weak lithology, broken surrounding rock, variable cross-sections, wide sections up to 9.9 m, and clusters of nearby chambers, there was severe deformation and breakdown in the No. 10 intersection of the roadway of large-scale variable cross-section at the − 760 m level in the Nanfeng working area of the Wuyang Coal Mine. As there are insufficient examples in engineering methods pertaining to the geological environment described above, the numerical calculation model was oversimplified and support theory underdeveloped; therefore, it is imperative to develop an effective support system for the stability and sustenance of deep roadways. In this study, a quantitative analysis of the geological environment of the roadway through field observations, borehole peeking, and ground stress testing is carried out to establish the FLAC 3D variable cross-section crossing roadway model. This model is combined with the strain softening constitutive (surrounding rock) and Mohr-Coulomb constitutive (other deep rock formations) models to construct a compression arch mechanical model for deep soft rock, based on the quadratic parabolic Mohr criterion. An integrated control technology of bolting and grouting that is mainly composed of a high-strength hollow grouting cable bolt equipped with modified cement grouting materials and a high-elongation cable bolt is developed by analyzing the strengthening properties of the surrounding rock before and after bolting, based on the Heok-Brown criterion. As a result of on-site practice, the following conclusions are drawn: (1) The plastic zone of the roof of the cross roadway is approximately 6 m deep in this environment, the tectonic stress is nearly 30 MPa, and the surrounding rock is severely fractured. (2) The deformation of the roadway progressively increases from small to large cross-sections, almost doubling at the largest cross-section. The plastic zone is concentrated at the top plate and shoulder and decreases progressively from the two sides to the bottom corner. The range of stress concentration at the sides of the intersection roadway close to the passageway is wider and higher. (3) The 7 m-thick reinforced compression arch constructed under the strengthening support scheme has a bearing capacity enhanced by 1.8 to 2.3 times and increase in thickness of the bearing structure by 1.76 times as compared to the original scheme. (4) The increase in the mechanical parameters c and φ of the surrounding rock after anchoring causes a significant increase in σ c and σ t ; the pulling force of the cable bolt beneath the new grouting material is more than twice that of ordinary cement grout, and according to the test, the supporting stress field shows that the 7.24 m surrounding rock is compacted and strengthened in addition to providing a strong foundation for the bolt (cable). On-site monitoring shows that the 60-day convergence is less than 30 mm, indicating that the stability control of the roadway is successful.

Experimental Study on the Bearing Behavior of Bolted and Grouted Broken Surrounding Rock of Deep Roadways in a Coal Mine

A New Approach to Studying the Mechanical Characteristics of the Anchoring-Grouting System in Broken Surrounding Rock

Laboratory and field investigations of different bolting configurations for coal mine roadways in weak coal strata

Energy Evolution and Damage Deformation Behavior of Cemented Broken Coal Specimen under Triaxial Compression Condition

Failure Analysis of Intersections of Large-Scale Variable Cross-Section Roadways in Deep Soft Rock and Study of Integrated Control Technology of Bolting and Grouting

Tensile Bearing Performance and Mechanical Transfer Mechanism of Coal-Rock Composite Anchor Bodies Under Different Height Ratios of Rock to Coal

Field and Numerical Study on Deformation and Failure Characteristics of Deep High-Stress Main Roadway in Dongpang Coal Mine

Research on the Compressive Deformation and Re-Bearing Capacity Characteristics of Broken Rock Mass in Deep Roadway

Study on the Failure Mechanism for Coal Roadway Stability in Jointed Rock Mass Due to the Excavation Unloading Effect

True Triaxial Test and Research into Bolting Support Compensation Stresses for Coal Roadways at Different Depths

Instability Mechanism and Surrounding Rock Control Technology of Roadway Subjected to Mining Dynamic Loading with Short Distance: A Case Study of the Gubei Coal Mine in China

Numerical study on the characteristics of roadway failure and instability in coal seam with rock parting

Experimental investigation on bolted rock mass under static-dynamic coupled loading

Experimental investigation on rockburst behavior of the rock-coal-bolt specimen under different stress conditions

Multi-scale experimental study on the failure mechanism of high-strength bolts under highly mineralized environment

Comprehensive Evaluation of the Reinforcement Effect of Grouting in Broken Surrounding Rock in Deep Roadways

Experimental Research on Bolt-Strengthening Effect under Static and Dynamic Coupled Loading with Sand-Powder 3d Printing

Study on Mechanical Properties and Control Technology of Surrounding Rock in the Fracture Zone of a Roadway

Bearing Characteristics of Surrounding Rock of Deep Mining Roadway with Full and End Bolt Anchorages: A Comparative Numerical and Experimental Study

Mechanical Behaviour of a Deep Soft Rock Large Deformation Roadway Supported by NPR Bolts: A Case Study

Experimental study of axial stress distribution and transfer along the bolt rods in an underground coal mine