Abstract:A new technique is developed for in situ measurement of Os-187/Os-188 in sulfides using LA-MC-ICP-MS, with the improvement of the spatial resolution and quantification limits. In this study, an all-ion counter (all-IC) configuration is adopted for static concurrent measurement of Os-187 + Re-187 and Os-188 along with Re-185. To cross-calibrate the detection efficiencies of the different ion counters, an Au standard solution is introduced into the instrument and its signal is measured in each ion counter in a dynamic peak jumping mode. Then, the signal intensities of IC1, IC2 and IC3 are all normalized to that of IC0. The sample-standard bracketing (SSB) method is adopted not only for the Re interference and Os mass fractionation correction but also for the monitoring of detection efficiency during continuous measurement. In detail, an in-house sulfide standard CR-1P (only spiking Re) is specifically employed for correcting interference Re-187 on Os-187 and monitoring detection efficiency variation in IC0 and IC1. The mass fractionation of Os and detection efficiency variation of IC1 and IC2 are calibrated against another in-house sulfide standard CO-1P (only spiking Os). Even though the Os-188 intensity decreases approximately 20 times, our improved method still provides accurate and precise results of the Os-187/Os-188 ratio, whereas published methods that employ Faraday detectors for the signal collection do not work. Furthermore, the threshold of reliable interference correction of Re-187 on Os-187 is estimated by analysing synthetic sulfides with different Re/Os ratios. The analytical results demonstrate that the relative deviations (RD) of the calculated Os-187/Os-188 ratio will be limited to within 0.8%, 1%, 3% and 5%, when Re-187/Os-188 is lower than 0.055, 0.09, 0.42 and 0.75 (i.e., Re/Os: 0.012, 0.019, 0.089 and 0.159), respectively. In general, this new method significantly improves the spatial resolution and quantification limits of in situ measurements, which is beneficial for analysing sulfides in the depleted subcontinental lithospheric mantle (SCLM).

Investigation of elements 107, bohrium (Bh) and 108, hassium (Hs) in sulfuric acid solutions according to the test experiments with their homologs

SPEC: A New Process for Strontium and Cesium Partitioning Utilizing Two Macroporous Silica-Based Supramolecular Recognition Agents Impregnated Polymeric Composites

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

SPEC Process II. Adsorption of Strontium and Some Typical Co-Existent Elements Contained in High Level Liquid Waste Onto a Macroporous Silica-Based Crown Ether Impregnated Functional Composite

Separation of strontium ions from a simulated highly active liquid waste using a composite of silica-crown ether in a polymer.

Adsorption of Cesium and Some Typical Coexistent Elements Onto a Modified Macroporous Silica-Based Supramolecular Recognition Material.

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

Chromatographic Separation of Cesium by a Macroporous Silica-Based Supramolecular Recognition Agent Impregnated Material

Development of the chromatographic partitioning of cesium and strontium utilizing two macroporous silica-based calix[4]arene-crown and amide impregnated polymeric composites: PREC partitioning process.

Preparation of Macroporous Silica-Based Crown Ether Materials for Strontium Separation

Chromatographic Separation of Strontium (II) from a Nitric Acid Solution Containing Some Typically Simulated Elements by a Novel Silica‐Based TODGA Impregnated Polymeric Composite in the MAREC Process

Progress in Chemical Separation and Purification for Re and Os Isotopic Analyses

High-precision Measurement for the Concentration and Isotopic Composition of Rhenium and Osmium in Micro-amount of Geological Samples

Multiple Investigations of Aqueous Eu(III)-oxalate Complexes: the Reduction in Coordination Number and Validation of Spectral Linear Correlation.

An improved in situ technique for the analysis of the Os isotope ratio in sulfides using laser ablation-multiple ion counter inductively coupled plasma mass spectrometry

Ion exchange behavior of astatine and bismuth

Gas-phase Chemistry of Mo, Ru, W, and Os Metal Carbonyl Complexes

Radiochemical Studies on the Separation of Cesium, Cobalt, and Europium from Aqueous Solutions Using Zirconium Selenomolybdate Sorbent

Speciation of Antimony(iii) and Antimony(v) Species by Using High-Performance Liquid Chromatography Coupled to Hydride Generation Atomic Absorption Spectrometry

Efficient Separation of Strontium in Different Environments with Novel Acid-Resistant Silica-Based Ion Exchanger

Extraktion von Elementen mit Dithizon und Diethylammonium-N,N′-diethyldithiocarbamat aus flußsauren Lösungen und ihre Anwendung in der Analyse von Niob