Abstract:Introduction: In recent years, hand prostheses achieved relevant improvements in term of both motor and functional recovery. However, the rate of devices abandonment, also due to their poor embodiment, is still high. The embodiment defines the integration of an external object – in this case a prosthetic device – into the body scheme of an individual. One of the limiting factors causing lack of embodiment is the absence of a direct interaction between user and environment. Many studies focused on the extraction of tactile information via custom electronic skin technologies coupled with dedicated haptic feedback, though increasing the complexity of the prosthetic system. Contrary wise, this paper stems from the authors' preliminary works on multi-body prosthetic hand modeling and the identification of possible intrinsic information to assess object stiffness during interaction. Methods: Based on these initial findings, this work presents the design, implementation and clinical validation of a novel real-time stiffness detection strategy, without ad-hoc sensing, based on a Non-linear Logistic Regression (NLR) classifier. This exploits the minimum grasp information available from an under-sensorized and under-actuated myoelectric prosthetic hand, Hannes. The NLR algorithm takes as input motor-side current, encoder position, and reference position of the hand and provides as output a classification of the grasped object (no-object, rigid object, and soft object). This information is then transmitted to the user via vibratory feedback to close the loop between user control and prosthesis interaction. This implementation was validated through a user study conducted both on able bodied subjects and amputees. Results: The classifier achieved excellent performance in terms of F1Score (94.93%). Further, the able-bodied subjects and amputees were able to successfully detect the objects' stiffness with a F1Score of 94.08% and 86.41%, respectively, by using our proposed feedback strategy. This strategy allowed amputees to quickly recognize the objects' stiffness (response time of 2.82 s), indicating high intuitiveness, and it was overall appreciated as demonstrated by the questionnaire. Furthermore, an embodiment improvement was also obtained as highlighted by the proprioceptive drift toward the prosthesis (0.7 cm).

A 3-D-Printed Elastomeric Strain Sensor With Mechanical and Thermal Characterization for Restoring Proprioception in Lower Limb Amputees

Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications

A Compliant Three-Axis Force Sensor with Solid–Liquid Hybrid Cover for Prosthetic Fingertip

Performance Assessment of Thermal Sensors for Hand Prostheses

A Novel Silicon Based Tactile Sensor On Elastic Steel Sheet For Prosthetic Hand

A Mechatronic Platform for Calibration and Performance Test of Extrinsic Tactile Sensor on Prosthesis Hand.

Enhancing functional abilities and cognitive integration of the lower limb prosthesis

A Novel Tactile Sensing Array with Elastic Steel Frame Structure for Prosthetic Hand.

Sensitivity‐Enhanced Skin‐Attachable Strain Sensors Using Multi‐Material Printed Bioinspired Heterogeneous Moduli Structures for Proprioceptive Training

Object stiffness recognition and vibratory feedback without ad-hoc sensing on the Hannes prosthesis: A machine learning approach

Reproducing tactile and proprioception based on the human-in-the-closed-loop conceptual approach

A closed-loop hand prosthesis with simultaneous intraneural tactile and position feedback

Fully 3D printed flexible, conformal and multi-directional tactile sensor with integrated biomimetic and auxetic structure

Wireless Sensors for Continuous, Multimodal Measurements at the Skin Interface with Lower Limb Prostheses

A non-invasive wearable sensory leg neuroprosthesis: mechanical, electrical and functional validation

Design, Fabrication, and Validation of a Flexible Tactile Sensor for a Hand Prosthesis

Recent Developments in Prosthesis Sensors, Texture Recognition, and Sensory Stimulation for Upper Limb Prostheses

Development of Prototype Low-Cost QTSS™ Wearable Flexible More Enviro-Friendly Pressure, Shear, and Friction Sensors for Dynamic Prosthetic Fit Monitoring

Soft robotics-inspired sensing system for detecting downward movement and pistoning in prosthetic sockets: A proof-of-concept study

Tactile Perception in Upper Limb Prostheses: Mechanical Characterization, Human Experiments, and Computational Findings

Wearable Haptic Device for Individuals with Congenital Absence of Proprioception