Anisotropic and Noncoaxial Behavior of Soft Marine Clay under Stress Path Considering the Variation of Principal Stress Direction

Heng Zhuang,Jun Wang,Ziyang Gao,Heng Zhuang; Jun Wang; and Ziyang Gao1Ph.D. Candidate,College of Architecture and Civil Engineering,Key Laboratory of Engineering and Technology for Soft Soil Foundation and Tideland Reclamation of Zhejiang Province,Wenzhou Univ.,Wenzhou 325035,P.R. China. Email: 2Professor,College of Architecture and Civil Engineering,Key Laboratory of Engineering and Technology for Soft Soil Foundation and Tideland Reclamation of Zhejiang Province,Wenzhou Univ.,Wenzhou 325035,P.R. China. Email: sunnystar1980@163.com3Ph.D. Candidate,College of Architecture and Civil Engineering,Key Laboratory of Engineering and Technology for Soft Soil Foundation and Tideland Reclamation of Zhejiang Province,Wenzhou Univ.,Wenzhou 325035,P.R. China (corresponding author). Email: gziyoung@163.com

DOI: https://doi.org/10.1061/(asce)gm.1943-5622.0002390

IF: 3.918

2022-03-25

International Journal of Geomechanics

Abstract:The influence of the variation in the principal stress direction on the anisotropic and noncoaxial behavior was investigated through several hollow cylinder apparatus (HCA) tests that were performed on reconstituted soft clay specimens under a stress path with a fixed or continuous rotation of the major principal stress axis. In particular, the varying amplitude of the deviator stress ( q ) and intermediate principal stress coefficients ( b ) were focused upon. The results indicated that the shear stiffness and strength were strongly dependent on the fixed major principal stress angle. Furthermore, apparent noncoaxiality was observed between the orientations of the major principal strain increment and the major principal stress. Consequently, the noncoaxial behavior of the reconstituted soft clay was sufficiently and effectively described using rose and polar diagrams. Furthermore, the data fluctuation indicated that the noncoaxiality of soft clay was strongly dependent on both q and b during the pure principal stress rotation (PSR). The results obtained for undisturbed clay and sand are not expected to be applicable to reconstituted clay, because its behavior is in contrast to the former two. Regarding reconstituted soft clay, the degree of noncoaxiality was observed to increase during the second rotation ( N = 2) compared with that during the first rotation ( N = 1). However, this trend gradually weakened with an increase in q or b values. Moreover, regardless of whether N = 1 or 2, the degrees of noncoaxiality decreased with the increase in q for b = 0.5 whereas it increased with the increase in b values for N = 1. However, those for b = 1 were the smallest for N = 2. The results are expected to provide an experimental basis for the constitutive modeling of soft clay with fixed and continuous rotations of the major principal stress axes in ocean engineering.

engineering, geological