Demixing microwave signals using system-on-chip photonic processor

Sheng Gao,Chu Wu,Xing Lin

DOI: https://doi.org/10.1038/s41377-024-01404-6

2024-02-27

Light Science & Applications

Abstract:The integrated photonic processor, co-packaged with electronic peripherals, is proposed for blind source separation of microwave signals, which separates signal-of-interest from dynamic interference with real-time adaptability.

optics

What problem does this paper attempt to address?

Programmable Optical Processor Chips: Toward Photonic RF Filters with DSP-level Flexibility and MHz-band Selectivity

Yiwei Xie,Zihan Geng,Leimeng Zhuang,Maurizio Burla,Caterina Taddei,Marcel Hoekman,Arne Leinse,Chris G. H. Roeloffzen,Klaus-J. Boller,Arthur J. Lowery

DOI: https://doi.org/10.1515/nanoph-2017-0077

IF: 7.5

2018-01-01

Nanophotonics

Abstract:Integrated optical signal processors have been identified as a powerful engine for optical processing of microwave signals. They enable wideband and stable signal processing operations on miniaturized chips with ultimate control precision. As a promising application, such processors enables photonic implementations of reconfigurable radio frequency (RF) filters with wide design flexibility, large bandwidth, and high-frequency selectivity. This is a key technology for photonic-assisted RF front ends that opens a path to overcoming the bandwidth limitation of current digital electronics. Here, the recent progress of integrated optical signal processors for implementing such RF filters is reviewed. We highlight the use of a low-loss, high-index-contrast stoichiometric silicon nitride waveguide which promises to serve as a practical material platform for realizing high-performance optical signal processors and points toward photonic RF filters with digital signal processing (DSP)-level flexibility, hundreds- GHz bandwidth, MHz-band frequency selectivity, and full system integration on a chip scale.
A system-on-chip microwave photonic processor solves dynamic RF interference in real time with picosecond latency

Weipeng Zhang,Joshua C. Lederman,Thomas Ferreira de Lima,Jiawei Zhang,Simon Bilodeau,Leila Hudson,Alexander Tait,Bhavin J. Shastri,Paul R. Prucnal

2023-10-19

Abstract:Radio-frequency interference is a growing concern as wireless technology advances, with potentially life-threatening consequences like interference between radar altimeters and 5G cellular networks. Mobile transceivers mix signals with varying ratios over time, posing challenges for conventional digital signal processing (DSP) due to its high latency. These challenges will worsen as future wireless technologies adopt higher carrier frequencies and data rates. However, conventional DSPs, already on the brink of their clock frequency limit, are expected to offer only marginal speed advancements. This paper introduces a photonic processor to address dynamic interference through blind source separation (BSS). Our system-on-chip processor employs a fully integrated photonic signal pathway in the analogue domain, enabling rapid demixing of received mixtures and recovering the signal-of-interest in under 15 picoseconds. This reduction in latency surpasses electronic counterparts by more than three orders of magnitude. To complement the photonic processor, electronic peripherals based on field-programmable gate array (FPGA) assess the effectiveness of demixing and continuously update demixing weights at a rate of up to 305 Hz. This compact setup features precise dithering weight control, impedance-controlled circuit board and optical fibre packaging, suitable for handheld and mobile scenarios. We experimentally demonstrate the processor's ability to suppress transmission errors and maintain signal-to-noise ratios in two scenarios, radar altimeters and mobile communications. This work pioneers the real-time adaptability of integrated silicon photonics, enabling online learning and weight adjustments, and showcasing practical operational applications for photonic processing.

Optics,Signal Processing
A broadband integrated microwave photonic mixer based on balanced photodetection

Zhenzhu Xu,Li Mei,Yuhua Chong,Xudong Gao,Shoubao Han,Chengkun Yang,Lin Li

DOI: https://doi.org/10.1007/s12200-023-00064-5

2023-05-26

Abstract:An integrated microwave photonic mixer based on silicon photonic platforms is proposed, which consist of a dual-drive Mach-Zehnder modulator and a balanced photodetector. The modulated optical signals from microwave photonic links can be directly demodulated and down-converted to intermediate frequency (IF) signals by the photonic mixer. The converted signal is obtained by conducting off-chip subtraction of the outputs from the balanced photodetector, and subsequent filtering of the high frequency items by an electrical low-pass filter. Benefiting from balanced detection, the conversion gain of the IF signal is improved by 6 dB, and radio frequency leakage and common-mode noise are suppressed significantly. System-level simulations show that the frequency mixing system has a spurious-free dynamic range of 89 dB·Hz2/3, even with deteriorated linearity caused by the two cascaded modulators. The spur suppression ratio of the photonic mixer remains higher than 40 dB when the IF varies from 0.5 to 4 GHz. The electrical-electrical 3 dB bandwidth of frequency conversion is 11 GHz. The integrated frequency mixing approach is quite simple, requiring no extra optical filters or electrical 90° hybrid coupler, which makes the system more stable and with broader bandwidth so that it can meet the potential demand in practical applications.
Fully integrated hybrid multimode-multiwavelength photonic processor with picosecond latency

Ahmed Khaled,A. Aadhi,Chaoran Huang,Alexander N. Tait,Bhavin J. Shastri

2024-11-23

Abstract:High-speed signal processing is essential for maximizing data throughput in emerging communication applications, like multiple-input multiple-output (MIMO) systems and radio-frequency (RF) interference cancellation. However, as these technologies scale, they increase hardware complexity, computing power demands, and create significant digital signal processing (DSP) challenges. While transistor miniaturization has improved digital electronic processors, they still face physical bottlenecks, limiting computational throughput and increasing DSP latency. Photonic processors present a promising alternative, offering large bandwidth, low loss, parallel processing, and low latency. Yet, scalability in photonic processors remains limited by system integration, device size, and on-chip multiplexing challenges. Here, we introduce a scalable on-chip hybrid multiplexed photonic processor, combining mode-division multiplexing (MDM) and wavelength-division multiplexing (WDM). This marks the first implementation of a monolithically integrated MDM-WDM-compatible processor, featuring mode multiplexers, multimode microring resonators, and multimode balanced photodetectors. Furthermore, we demonstrate real-time unscrambling of 5 Gb/s non-return-to-zero optical MIMO signals and RF phase-shift keying signal unjamming. Our system's 30 ps processing latency makes it ideal for real-time MIMO and RF applications. Our analysis reveals that hybrid MDM-WDM multiplexing improves the number of operations per second by 4.1 times over spatially multiplexed WDM configurations, positioning it as a strong candidate for next-generation large-scale photonic processors.

Optics
Reconfigurable Microwave Photonic Mixer for Hybrid Macro-Micro Cellular Systems.

Yongsheng Gao,Fangjing Shi,Jing Zhang,Biao Cao,Boyuan Ma,Weile Zhai,Yangyu Fan

DOI: https://doi.org/10.1364/oe.481373

IF: 3.8

2023-01-01

Optics Express

Abstract:Microwave photonic mixing can realize the frequency conversion of microwave signals in the optical domain, breaking through the bandwidth bottleneck and electromagnetic interference problems of traditional microwave mixing methods. In the background of the hybrid macro-micro cellular system, a wideband, large dynamic range and reconfigurable microwave photonic mixer is proposed, theoretically analyzed and experimentally demonstrated in this paper. By adjusting the modulator bias voltages and matching the proper digital domain operations, a microwave photonic mixer with reconfigurable functions including single-ended dispersion immune mixing, I/Q frequency down-conversion, image rejection mixing, and double-balanced mixing are realized, respectively. Meanwhile, optimizing the electrical attenuator using convex optimization can suppress the third-order intermodulation distortion (IMD3), maximize the conversion gain, and finally improve the spur-free dynamic range (SFDR). Experimental results show that the proposed scheme can be operated with a frequency from 5 to 20 GHz, and the SFDR can achieve 118.3 dB·Hz4/5. Over the whole frequency range, I/Q frequency down-conversion can be well conducted with an amplitude imbalance below 0.7 dB and a phase imbalance below ±0.7°. After an I/Q imbalance compensation algorithm, the image rejection ratio of over 60 dB is produced. The power fading caused by fiber dispersion is also compensated successfully. For a vector signal with 16 quadrature amplitude modulation, the best error vector magnitude (EVM) reaches 3.4%.
Multifunctional Mixed Analog/digital Signal Processor Based on Integrated Photonics

Yichen Wu,Qipeng Yang,Bitao Shen,Yuansheng Tao,Xuguang Zhang,Zihan Tao,Luwen Xing,Zhangfeng Ge,Tiantian Li,Bowen Bai,Haowen Shu,Xingjun Wang

DOI: https://doi.org/10.29026/oes.2024.240012

2024-01-01

Opto-Electronic Science

Abstract:Photonic signal processing offers a versatile and promising toolkit for contemporary scenarios ranging from digital optical communication to analog microwave operation. Compared to its electronic counterpart, it eliminates inherent bandwidth limitations and meanwhile exhibits the potential to provide unparalleled scalability and flexibility, particularly through integrated photonics. However, by far the on-chip solutions for optical signal processing are often tailored to specific tasks, which lacks versatility across diverse applications. Here, we propose a streamlined chip-level signal processing architecture that integrates different active and passive building blocks in silicon-on-insulator (SOI) platform with a compact and efficient manner. Comprehensive and in-depth analyses for the architecture are conducted at levels of device, system, and application. Accompanied by appropriate configuring schemes, the photonic circuitry supports loading and processing both analog and digital signals simultaneously. Three distinct tasks are facilitated with one single chip across several mainstream fields, spanning optical computing, microwave photonics, and optical communications. Notably, it has demonstrated competitive performance in functions like image processing, spectrum filtering, and electro-optical bandwidth equalization. Boasting high universality and a compact form factor, the proposed architecture is poised to be instrumental for next-generation functional fusion systems.
A Reconfigurable Microwave Photonic Channelized Receiver Based on Dense Wavelength Division Multiplexing Using an Optical Comb

Ze Li,Xianmin Zhang,Hao Chi,Shilie Zheng,Xiaofeng Jin,Jianping Yao

DOI: https://doi.org/10.1016/j.optcom.2012.01.023

IF: 2.4

2012-01-01

Optics Communications

Abstract:A photonic approach to implementing a microwave channelized receiver based on dense wavelength division multiplexing using an optical comb is proposed. In the approach, a flat optical comb with 11 comb lines is generated using two cascaded Mach-Zehnder modulators. Frequency analysis of a microwave signal with multiple-frequency components is realized by using the optical comb together with an optical etalon with a periodic transfer function, a wavelength division multiplexer (WDM) and a photodetector array. The system is investigated numerically. Frequency measurement of a multi-frequency signal with a measurement range from 0.5-11.5 with an accuracy of ±0.5GHz is achieved. The reconfigurability of the system realized by tuning the comb-line spacing and the peak positions of the etalon is also evaluated. The improvement of the dynamic range of the system using an optimized periodic filter is also discussed.
Silicon Photonics-Based Signal Processing for Microwave Photonic Frontends

Minghua Chen,Hongchen Yu,Jingjing Wang,Hongwei Chen,Sigang Yang,Shizhong Xie

DOI: https://doi.org/10.1007/978-3-642-10503-6_11

2015-01-01

Abstract:Integrated signal processors offer potential high resolution, tunability and programmable microwave photonic signal processing. The high performance integrated FIR/IIR signal processers have been presented, accompanying an application for the full-band microwave photonic frontends.
Broadband physical layer cognitive radio with an integrated photonic processor for blind source separation

Weipeng Zhang,Alexander Tait,Chaoran Huang,Thomas Ferreira de Lima,Simon Bilodeau,Eric C. Blow,Aashu Jha,Bhavin J. Shastri,Paul Prucnal

DOI: https://doi.org/10.1038/s41467-023-36814-4

IF: 16.6

2023-02-28

Nature Communications

Abstract:The expansion of telecommunications incurs increasingly severe crosstalk and interference, and a physical layer cognitive method, called blind source separation (BSS), can effectively address these issues. BSS requires minimal prior knowledge to recover signals from their mixtures, agnostic to the carrier frequency, signal format, and channel conditions. However, previous electronic implementations did not fulfil this versatility due to the inherently narrow bandwidth of radio-frequency (RF) components, the high energy consumption of digital signal processors (DSP), and their shared weaknesses of low scalability. Here, we report a photonic BSS approach that inherits the advantages of optical devices and fully fulfils its "blindness" aspect. Using a microring weight bank integrated on a photonic chip, we demonstrate energy-efficient, wavelength-division multiplexing (WDM) scalable BSS across 19.2 GHz processing bandwidth. Our system also has a high (9-bit) resolution for signal demixing thanks to a recently developed dithering control method, resulting in higher signal-to-interference ratios (SIR) even for ill-conditioned mixtures.

multidisciplinary sciences
Integrated lithium niobate microwave photonic processing engine

Hanke Feng,Tong Ge,Xiaoqing Guo,Benshan Wang,Yiwen Zhang,Zhaoxi Chen,Sha Zhu,Ke Zhang,Wenzhao Sun,Chaoran Huang,Yixuan Yuan,Cheng Wang

2024-01-06

Abstract:Integrated microwave photonics is an intriguing field that leverages integrated photonic technologies for the generation, transmission, and manipulation of microwave signals in chip-scale optical systems. In particular, ultrafast processing and computation of analog electronic signals in the optical domain with high fidelity and low latency could enable a variety of applications such as MWP filters, microwave signal processing, and image recognition. An ideal photonic platform for achieving these integrated MWP processing tasks shall simultaneously offer an efficient, linear and high-speed electro-optic modulation block to faithfully perform microwave-optic conversion at low power, and a low-loss functional photonic network that can be configured for a variety of signal processing tasks, as well as large-scale, low-cost manufacturability to monolithically integrate the two building blocks on the same chip. In this work, we demonstrate such an integrated MWP processing engine based on a thin-film lithium niobate platform capable of performing multi-purpose processing and computation tasks of analog signals up to 92 giga samples per second at CMOS-compatible voltages. We demonstrate high-speed analog computation, i.e., first- and second-order temporal integration and differentiation with computing accuracies up to 98.1 %, and deploy these functions to showcase three proof-of-concept applications, namely, ordinary differential equation solving, ultra-wideband signal generation and high-speed edge detection of images. We further leverage the image edge detector to enable a photonic-assisted image segmentation model that could effectively outline the boundaries of melanoma lesion in medical diagnostic images, achieving orders of magnitude faster processing speed and lower power consumption than conventional electronic processors.

Optics,Applied Physics
Single-Chip Silicon Photonic Processor for Analog Optical and Microwave Signals

Hong Deng,Jing Zhang,Emadreza Soltanian,Xiangfeng Chen,Chao Pang,Nicolas Vaissiere,Delphine Neel,Joan Ramirez,Jean Decobert,Nishant Singh,Guy Torfs,Gunther Roelkens,Wim Bogaerts

2023-11-15

Abstract:The explosion of data volume in communications, AI training, and cloud computing requires efficient data handling, which is typically stored as digital electrical information and transmitted as wireless radio frequency (RF) signals or light waves in optical fibres. Today's communications systems mostly treat the RF and optical signals separately, which results in unnecessary conversion losses and increased cost. In this work, we report the first fully on-chip signal processor for high-speed RF and optical signals based on a silicon photonic circuit. Our chip is capable of both generation and detection of analog electrical and optical signals, and can program a user-defined filter response in both domains. The single silicon photonic chip integrates all essential components like modulators, optical filters, and photodetectors, as well as tunable lasers enabled by transfer-printed Indium Phosphide (InP) optical amplifiers. The system's configuration is locally programmed through thermo-optic phase shifters and monitored by photodetectors. We demonstrate our chip's capabilities with different combinations of RF and optical signal processing functions, including optical and RF signal generation and filtering. This represents a key step towards compact microwave photonic systems for future wireless communication and sensing applications.

Optics,Applied Physics
On-chip Photonic Microsystem for Optical Signal Processing Based on Silicon and Silicon Nitride Platforms

Yu Li,Jiachen Li,Hongchen Yu,Hai Yu,Hongwei Chen,Sigang Yang,Minghua Chen

DOI: https://doi.org/10.1515/aot-2017-0057

2018-01-01

Advanced Optical Technologies

Abstract:The explosive growth of data centers, cloud computing and various smart devices is limited by the current state of microelectronics, both in terms of speed and heat generation. Benefiting from the large bandwidth, promising low power consumption and passive calculation capability, experts believe that the integrated photonics-based signal processing and transmission technologies can break the bottleneck of microelectronics technology. In recent years, integrated photonics has become increasingly reliable and access to the advanced fabrication process has been offered by various foundries. In this paper, we review our recent works on the integrated optical signal processing system. We study three different kinds of on-chip signal processors and use these devices to build microsystems for the fields of microwave photonics, optical communications and spectrum sensing. The microwave photonics front receiver was demonstrated with a signal processing range of a full-band (L-band to W-band). A fully integrated microwave photonics transceiver without the on-chip laser was realized on silicon photonics covering the signal frequency of up 10 GHz. An all-optical orthogonal frequency division multiplexing (OFDM) de-multiplier was also demonstrated and used for an OFDM communication system with the rate of 64 Gbps. Finally, we show our work on the monolithic integrated spectrometer with a high resolution of about 20 pm at the central wavelength of 1550 nm. These proposed on-chip signal processing systems potential applications in the fields of radar, 5G wireless communication, wearable devices and optical access networks.
High-Capacity Space-Division Multiplexing Communications With Silicon Photonic Blind Source Separation

Chaoran Huang,Dongliang Wang,Weipeng Zhang,Benshan Wang,Alexander N. Tait,Thomas Ferreira de Lima,Bhavin J. Shastri,Paul R. Prucnal

DOI: https://doi.org/10.1109/jlt.2022.3152027

IF: 4.7

2022-03-15

Journal of Lightwave Technology

Abstract:Space-division multiplexing is a widely used technique to improve data-carrying capacities in both wireless and optical communication systems. However, tightly packed spatial channels cause severe crosstalk. High data rates and large channel counts impose severe constraints on resolving the crosstalk using traditional digital signal processing algorithms and electronic circuits. In order to solve these issues, this paper presents a silicon photonic system combining high-speed silicon photonic devices with a novel blind source separation (BSS) algorithm. We first demonstrate using photonic BSS to undo modal crosstalk in a short-reach multimode optical fiber interconnect for intra-data-center communications. The proposed photonic BSS system inherits the advantages of photonic matrix processor and the blindness of BSS, leading to superior energy and cost efficiency and reduced latency, while allowing to recover the signals using a sub-Nyquist sampling rate and in a free-running mode, and offering unmatched agility in signal format and data rate. The feasibility of using photonic processors for mode crosstalk equalization has been recently demonstrated, assisted with training sequences. Our approach, photonic BSS, in contrast, can tackle the more difficult problem of making the receiver transparent to any data rate and modulation format, and workable with slow and cost-effective electronics. In addition, we find that photonic BSS has a much better scaling law for space-division multiplexing (SDM)-based communication systems than digital signal processing (DSP). When compared to state-of-the-art DSP, photonic BSS can reduce system power consumption, speed, and latency by several orders of magnitude, particularly for high-capacity communications with high data rates per channel and a large number of channels. Photonic BSS has the added advantages of being agnostic to transmission content, making it exceptional at protecting communication privacy. This paper also discusses our previous work in demonstrating photonic BSS for privacy protection in wireless multiple-in multiple-out (MIMO) communications using silicon photonic micoring resonator (MRR) weight banks.

engineering, electrical & electronic,optics,telecommunications
Chip-based SBS for image rejection in a broadband microwave photonic mixer

Luke McKay,Choon Kong Lai,Nicholas J Athanasios,Duk-Yong Choi,Stephen J Madden,Benjamin J Eggleton,Moritz Merklein

DOI: https://doi.org/10.1364/OE.482871

2023-01-30

Abstract:Microwave photonics offers a promising solution for frequency converting microwave signals, however, demonstrations so far have either been bulky fibre implementations or lacked rejection of interfering image signals. Here, we demonstrate the first microwave photonic mixer with image rejection of broadband signals utilising chip-based stimulated Brillouin scattering and interferometry. We demonstrate frequency down-conversion of carrier frequencies ranging from 10 GHz-16 GHz, ultra-high image rejection for a single tone of up to 70 dB, and 100 MHz and 400 MHz wide analogue signals with 28.5 dB and 16 dB image rejection, respectively. Furthermore, we down-convert 200 Mb/s quadrature-phase-shift keying signals with an error vector magnitude as low as -9.6 dB when simultaneously present interfering image signals are suppressed by the mixer.
Photonic-integrated circuits and components using quantum well intermixing

jian jun he,emil s koteles,p j poole,yan feng,michael j davis,n sylvain charbonneau,r d goldberg,i v mitchell

DOI: https://doi.org/10.1117/12.253161

1996-01-01

Abstract:The monolithic integration of optical components with different functionalities on a single semiconductor wafer requires spatially selective control of bandgap energies. We have developed a simple, post-growth technique based on quantum well intermixing using ion implantation and rapid thermal annealing, which allows multiple selective area bandgap tailoring. Waveguide absorption spectra demonstrate that the bandgap energy can be shifted as much as 90 nm without any excess loss. By depositing a SiO2 layer of different thicknesses in different regions as the implantation mask, quantum wells in different sections of a wafer can be intermixed to different degrees in a single implantation and annealing process. It has also been shown that the heavy-hole and light hole states in the quantum wells can become degenerate at a certain degree of intermixing, which allows the fabrication of polarization insensitive optical amplifiers and electro-absorptive switches. The performance of both active (laser, amplifier, modulator) and passive (waveguide) components produced using this technique will be presented.
Idler-free Microwave Photonic Mixer Integrated with a Widely Tunable and Highly Selective Microwave Photonic Filter.

Dan Zou,Xiaoping Zheng,Shangyuan Li,Hanyi Zhang,Bingkun Zhou

DOI: https://doi.org/10.1364/ol.39.003954

IF: 3.6

2014-01-01

Optics Letters

Abstract:A novel structure consisting of an idler-free microwave photonic mixer integrated with a widely tunable and highly selective microwave photonic filter is presented, which is comprised of a spectrum-sliced broadband optical source, a dual-parallel Mach-Zehnder modulator (DPMZM), and a spatial light amplitude and phase processor (SLAPP). By adjusting the optical phase shift in the DPMZM, the dispersion-induced mixing power fading can be eliminated. By applying a phase processor with the SLAPP, the distortion of the mixing filter brought upon by third-order dispersion is also compensated. Experiments are performed and show that the up/down-conversion signal has a clean spectrum and the mixing filter can be tuned from 12 to 20 GHz without any change to the passband shape. The out-of-band suppression ratio of the mixing filter is more than 40 dB, and the 3 dB bandwidth is 140 MHz.
Fully Integrated Hybrid Microwave Photonic Receiver

Jiachen Li,Sigang Yang,Hongwei Chen,Minghua Chen

DOI: https://doi.org/10.1364/prj.452631

IF: 7.6

2022-01-01

Photonics Research

Abstract:Microwave photonic receivers are a promising candidate in breaking the bandwidth limitation of traditional radio-frequency (RF) receivers. To further balance the performance superiority with the requirements regarding size, weight, and power consumption (SWaP), the implementation of integrated microwave photonic microsystems has been considered an upgrade path. However, up to now, to the best of our knowledge, chip-scale fully integrated microwave photonic receivers have not been reported due to the limitation of material platforms. In this paper, we report a fully integrated hybrid microwave photonic receiver (FIH-MWPR) obtained by comprising the indium phosphide (InP) laser chip and the monolithic silicon-on-insulator (SOI) photonic circuit into the same substrate based on the low-coupling-loss micro-optics method. Benefiting from the integration of all optoelectronic components, the packaged FIH-MWPR exhibits a compact volume of 6 cm 3 and low power consumption of 1.2 W. The FIH-MWPR supports a wide operation bandwidth from 2 to 18 GHz. Furthermore, its RF-link performance to down-convert the RF signals to the intermediate frequency is experimentally characterized by measuring the link gain, the noise figure, and the spurious-free dynamic range metrics across the whole operation frequency band. Moreover, we have utilized it as a de-chirp receiver to process the broadband linear frequency-modulated (LFM) radar echo signals at different frequency bands (S-, C-, X-, and Ku-bands) and successfully demonstrated its high-resolution-ranging capability. To the best of our knowledge, this is the first realization of a chip-scale broadband fully integrated microwave photonic receiver, which is expected to be an important step in demonstrating the feasibility of all-integrated microwave photonic microsystems oriented to miniaturized application scenarios.
Comparison of Microcomb-Based Radio-Frequency Photonic Transversal Signal Processors Implemented with Discrete Components Versus Integrated Chips

Yang Sun,Jiayang Wu,Yang Li,David J Moss,David J. Moss

DOI: https://doi.org/10.3390/mi14091794

IF: 3.4

2023-09-21

Micromachines

Abstract:RF photonic transversal signal processors, which combine reconfigurable electrical digital signal processing and high-bandwidth photonic processing, provide a powerful solution for achieving adaptive high-speed information processing. Recent progress in optical microcomb technology provides compelling multi-wavelength sources with a compact footprint, yielding a variety of microcomb-based RF photonic transversal signal processors with either discrete or integrated components. Although they operate based on the same principle, the processors in these two forms exhibit distinct performances. This paper presents a comparative investigation of their performances. First, we compare the performances of state-of-the-art processors, focusing on the processing accuracy. Next, we analyze various factors that contribute to the performance differences, including the tap number and imperfect response of experimental components. Finally, we discuss the potential for future improvement. These results provide a comprehensive comparison of microcomb-based RF photonic transversal signal processors implemented using discrete and integrated components and provide insights for their future development.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
An mm-Wave CMOS/Si-Photonics Reconfigurable Hybrid-Integrated Heterodyning Software-Defined Radio Receiver

Ramy Rady,Yu-Lun Luo,Christi Madsen,Samuel Palermo,Kamran Entesari

DOI: https://doi.org/10.1109/tmtt.2024.3371914

IF: 4.3

2024-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:This article presents a re-configurable hybrid millimeter-wave (mm-wave) software-defined radio (SDR) receiver that integrates silicon photonics (SiPhs) and complementary metal–oxide–semiconductor (CMOS) chips. The SDR system leverages a programmable photonic integrated circuit (PIC) with high- $Q$ filters, enabling versatile channel selection, image rejection, and jammer rejection capabilities over a tunable frequency range of 30–45 GHz and a bandwidth of 3–5 GHz. It is also capable of autonomously detecting and simultaneously rejecting up to four out-of-band (OOB) blockers, providing $>$ 80-dB rejection for two blockers (45 dB from the bandpass filter (BPF) and $>$ 35 dB from the notch filter) and $>$ 65 dB for four blockers (the notch filter provides $>$ 20 dB) for blockers as close as 1.25 GHz to the desired signal to enhance SDR robustness in crowded spectral environments. Moreover, signal downconversion and compensation for photonics-based losses yield an in-band spurious-free dynamic range (SFDR) of 50 dB over 5-GHz bandwidth (BW) and an error vector magnitude (EVM) measurement of $-$ 30 dB when processing a 100-MSymbol/s 64-QAM signal under the influence of two $-$ 10-dBm OOB blockers at 5-and 10-GHz offsets. Based on the agreement between simulation and measurement results, this article discusses link optimization and provides a recommendation for improvements in SFDR.

engineering, electrical & electronic

Demixing microwave signals using system-on-chip photonic processor

Programmable Optical Processor Chips: Toward Photonic RF Filters with DSP-level Flexibility and MHz-band Selectivity

A system-on-chip microwave photonic processor solves dynamic RF interference in real time with picosecond latency

A broadband integrated microwave photonic mixer based on balanced photodetection

Fully integrated hybrid multimode-multiwavelength photonic processor with picosecond latency

Reconfigurable Microwave Photonic Mixer for Hybrid Macro-Micro Cellular Systems.

Multifunctional Mixed Analog/digital Signal Processor Based on Integrated Photonics

A Reconfigurable Microwave Photonic Channelized Receiver Based on Dense Wavelength Division Multiplexing Using an Optical Comb

Silicon Photonics-Based Signal Processing for Microwave Photonic Frontends

Broadband physical layer cognitive radio with an integrated photonic processor for blind source separation

Integrated lithium niobate microwave photonic processing engine

Single-Chip Silicon Photonic Processor for Analog Optical and Microwave Signals

On-chip Photonic Microsystem for Optical Signal Processing Based on Silicon and Silicon Nitride Platforms

High-Capacity Space-Division Multiplexing Communications With Silicon Photonic Blind Source Separation

Chip-based SBS for image rejection in a broadband microwave photonic mixer

Photonic-integrated circuits and components using quantum well intermixing

Idler-free Microwave Photonic Mixer Integrated with a Widely Tunable and Highly Selective Microwave Photonic Filter.

Fully Integrated Hybrid Microwave Photonic Receiver

Comparison of Microcomb-Based Radio-Frequency Photonic Transversal Signal Processors Implemented with Discrete Components Versus Integrated Chips

An mm-Wave CMOS/Si-Photonics Reconfigurable Hybrid-Integrated Heterodyning Software-Defined Radio Receiver