Abstract:For commercial applications, the need for smaller footprint energy storage devices requires more energy to be stored per unit area. Carbon nanomaterials, especially graphene, have been studied as supercapacitor electrodes and can achieve high gravimetric capacities affording high gravimetric energy densities. However, most nanocarbon-based electrodes exhibit a significant decrease in their areal capacitances when scaled to the high mass loadings typically used in commercially available cells (∼10 mg/cm2). One of the reasons for this behavior is that the additional surface area in thick electrodes is not readily accessible by electrolyte ions due to the large tortuosity. Furthermore, the fabrication of such electrodes often involves complicated processes that limit the potential for mass production. Here, holey graphene electrodes for supercapacitors that are scalable in both production and areal capacitance are presented. The lateral surface porosity on the graphene sheets was created using a facile single-step air oxidation method, and the resultant holey graphene was compacted under ambient conditions into mechanically robust monolithic shapes that can be directly used as binder-free electrodes. In comparison, pristine graphene discs under similar binder-free compression molding conditions were extremely brittle and thus not deemed useful for electrode applications. The coin cell supercapacitors, based on these holey graphene electrodes exhibited small variations in gravimetric capacitance over a wide range of areal mass loadings (∼1-30 mg/cm2) at current densities as high as 30 mA/cm2, resulting in the near-linear increase of the areal capacitance (F/cm2) with the mass loading. The prospects of the presented method for facile binder-free ultrathick graphene electrode fabrication are discussed.

Suppressing charge trapping effect in ambipolar conducting polymer with vertically standing graphene as the composite electrode for high performance supercapacitor

Engineering 3D Vertically-Aligned Lamellar-Structured Graphene Incorporated with Polypyrrole for Thickness-Independent Zinc-ion Hybrid Supercapacitor

p-conjugated polymer nanocomposite for high-performance organic supercapacitor electrodes †

High energy-density supercapacitor based on a novel conjugated poly (1, 5-diaminoanthraquinone)/intercalated graphene composite system

The fabrication of bowl-shaped polypyrrole/graphene nanostructural electrodes and its application in all-solid-state supercapacitor devices

Morphology Controllable Nano-Sheet Polypyrrole-Graphene Composites for High-Rate Supercapacitor.

Heterostructural conductive polymer with multi-dimensional carbon materials for capacitive energy storage

Electrochemical Performance of Free-standing and Flexible Graphene and TiO2 Composites with Different Conductive Polymers as electrodes for Supercapacitor.

A high-energy, long cycle-life hybrid supercapacitor based on graphene composite electrodes

Vertically Aligned Micropillar Arrays Coated with a Conductive Polymer for Advanced Pseudocapacitance Energy Storage

One-step Fabrication of Heterogeneous Conducting Polymers-Coated Graphene Oxide/carbon Nanotubes Composite Films for High-Performance Supercapacitors

Research Progress on Conducting Polymer as Electrode Materials for Supercapacitors

Porous Graphene/CNT@Metal (Hydr)oxide Composite Films Achieving Fast Ion and Electron Kinetics for Asymmetric Supercapacitors with Ultra-High Volumetric Performance

Ultrahigh-power supercapacitors based on highly conductive graphene nanosheet/nanometer-sized carbide-derived carbon frameworks.

Enhanced Capacitance Performance by Coupling 2D Conductive Metal–Organic Frameworks and Conducting Polymers for Hybrid Supercapacitors

Ultrahigh power graphene based supercapacitor

Dry-Processed, Binder-Free Holey Graphene Electrodes for Supercapacitors with Ultrahigh Areal Loadings.

Polyaniline-graphene based composites electrode materials in supercapacitor: Synthesis, Performance and Prospects

Polymer brush stabilized amorphous MnO2 on graphene oxide sheets as novel electrode materials for high performance supercapacitors

High energy and high power density supercapacitor with 3D Al foam-based thick graphene electrode: Fabrication and simulation

Recent Advances in Graphene and Conductive Polymer Composites for Supercapacitor Electrodes: A Review