Abstract:Pressure-gradient-induced separation of swept and unswept turbulent boundary layers, based on the DNS studies of Coleman et al. (J. Fluid Mech. 2018 & 2019), have been analyzed for various nonequilibrium effects. The goal is to isolate physical processes critical to near-wall flow modeling. The decomposition of skin friction into contributing physical terms, proposed by Renard and Deck (J. Fluid Mech. 2016) (short: RD decomposition), affords several key insights into the near-wall physics of these flows. In the unswept case, spatial growth term (encapsulating nonequilibrium effects) and TKE production appear to be the dominant contributing terms in the RD decomposition in the separated and pressure-gradient zones, but a closer inspection reveals that only the spatial growth term dominates in the inner layer close to the separation bubble, implying a strong need for incorporating nonequilibrium terms in the wall modeling of this case. The comparison of streamwise RD decomposition of swept and unswept cases shows that a larger accumulated Clauser-pressure-gradient parameter history in the latter energizes the outer dynamics in the APG, leading to diminished separation bubble size in the unswept case. The spanwise RD decomposition in the swept case indicates that the downstream spanwise flow largely retains the upstream ZPG characteristics. This seems to ease the near-wall modeling challenge in the separated region, especially for basic models with an inherent log-law assumption. Wall-modeled LES of the swept and unswept cases are then performed using three wall models, validating many of the modeling implications from the DNS. In particular, the extension of RD decomposition to wall models underpins the criticality of spatial growth term close to the separation bubble, and the corresponding superior predictions by the PDE wall model due to its accurate capturing of this term.

Analysis of Separation in the Roughness Sublayer Using DNS Data and DANS/DEM Modelling of Roughness Effects

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

Modeling rough walls from surface topography to double averaged Navier-Stokes computation

Rough surfaces in under-explored surface morphology space and their implications on roughness modelling

Turbulent flow of Newtonian and non-Newtonian fluids in rough channels: Part I: Roughness effect on Newtonian fluids

Outer-layer Similarity and Energy Transfer in a Rough-Wall Turbulent Channel Flow

Direct Numerical Simulation of Turbulent Boundary Layer over Hemispherical Rough Walls

Effects of Finite-Size Neutrally Buoyant Particles on the Turbulent Channel Flow at a Reynolds Number of 395

Models of Interphase Drag Force from Direct Numerical Simulations of Upward Turbulent Particle-Laden Channel Flows

Wall-bounded flow over a realistically rough superhydrophobic surface

Direct numerical simulation of open-channel flow over a fully-rough wall at moderate relative submergence

Adverse-pressure-gradient turbulent boundary layer on convex wall

An analysis of drag reduction using spanwise forcing on rough walls

Scaling of Rough-Wall Turbulence by the Roughness Height and Steepness

Rearrangement of secondary flow over spanwise heterogeneous roughness

Modelling high-Reynolds-number effects in fully developed channel flows using a two-scale Reynolds stress model

Physics-based distinction of nonequilibrium effects in near-wall modeling of turbulent separation bubble with and without sweep

LES Wall Modeling for Heat Transfer at High Speeds

Turbulence Statistics in A Rectangular Channel Flow with One Groove-Roughened Wall

DNS Study of Swirling Intensity Effect on Flow Pattern of a Circular Jet

Friction factor decomposition for rough-wall flows: theoretical background and application to open-channel flows