Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Swifty fabrication of 3D multifunctional porous green polymer monoliths for supercapacitor electrodes and water purification applications

Facile, Scalable, Eco-Friendly Fabrication of High-Performance Flexible All-Solid-State Supercapacitors

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

Three-Dimensional Functionalized Graphenes with Systematical Control over the Interconnected Pores and Surface Functional Groups for High Energy Performance Supercapacitors

Cellulose-Solvent-Assisted, One-Step Pyrolysis to Fabricate Heteroatoms-Doped Porous Carbons for Electrode Materials of Supercapacitors

Polyethylene Glycol Wrapped Alginate/Graphene Hollow Microfibers as Flexible Supercapacitors

Porous wood composite as a green approach for enhancing electrochemical performance of gel polymer electrolytes for supercapacitors

Facile fabrication of platinum loaded poly(2,5-dimethoxy aniline)/activated carbon ternary nanocomposite as an efficient electrode material for high performance supercapacitors

Biomass-Swelling Assisted Synthesis of Hierarchical Porous Carbon Fibers for Supercapacitor Electrodes

In-situ synthesis of flexible nanocellulose/carbon nanotube/polypyrrole hydrogels for high-performance solid-state supercapacitors

Nitrogen-doped carbon layer on cellulose derived free-standing carbon paper for high-rate supercapacitors

Superb Electrolyte Penetration/Absorption of Three-Dimensional Porous Carbon Nanosheets for Multifunctional Supercapacitor

Intertwined Nanocarbon and Manganese Oxide Hybrid Foam for High-Energy Supercapacitors.

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Solvent-freely polymerizing catechol and paraformaldehyde to nitrogen-rich carbon for high-volumetric-performance supercapacitor

Porous Graphene/CNT@Metal (Hydr)oxide Composite Films Achieving Fast Ion and Electron Kinetics for Asymmetric Supercapacitors with Ultra-High Volumetric Performance

Design and synthesis of polyaniline/MWCNT composite hydrogel as a binder-free flexible supercapacitor electrode

Green H2O2 activation of electrospun polyimide-based carbon nanofibers towards high-performance free-standing electrodes for supercapacitors

Ultrasound‐Assisted Deposition of Sepia Melanin and Multiwalled Carbon Nanotubes on Carbon Cloth: Toward Sustainable Surface Engineering for Flexible Supercapacitors

Intertwined carbon networks derived from Polyimide/Cellulose composite as porous electrode for symmetrical supercapacitor

Rational design of N-doped porous biomass carbon nanofiber electrodes for flexible asymmetric supercapacitors with high-performance