Multifunctional La(OH)3@cellulose nanofibrous membranes for efficient oil/water separation and selective removal of dyes

Chenghong Ao,Jiangqi Zhao,Tian Xia,Bingxue Huang,Qunhao Wang,Jinggang Gai,Zhenming Chen,Wei Zhang,Canhui Lu

DOI: https://doi.org/10.1016/j.seppur.2020.117603

IF: 8.6

2021-01-01

Separation and Purification Technology

Abstract:<p>Water pollution has become a serious problem and water-immiscible oils and water-miscible dyes are two major pollutants. In this work, a multifunctional La(OH)₃@cellulose nanofibrous membrane (L-CNM) was prepared through one-pot electrospinning during which the sheet-like La(OH)₃ was <em>in situ</em> grown on cellulose nanofibers. The La(OH)₃ nanosheets endowed the membrane with a high adsorptive capacity toward Congo red (CR). Interestingly, the obtained membrane was able to not only remove CR from dye mixtures with opposite charges, but also effectively separate CR from dye mixtures having the same charge, which has rarely been reported. Meanwhile, the as-prepared membrane could also separate a series of oil/water mixtures with high fluxes and separation efficiencies due to its underwater superoleophobicity and low oil adhesion. This work may inspire the development of next-generation multifunctional materials for wastewater treatment, especially in selective removal of the target dye from a dye mixture with the same charge.</p>

engineering, chemical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the effective removal of two major pollutants in water pollution - water - insoluble oil and water - soluble dyes. Specifically, the paper studied a multifunctional La(OH)₃@cellulose nanofiber membrane (L - CNM) prepared by one - step electrospinning. This membrane can not only efficiently separate oil - water mixtures, but also selectively remove dyes, especially can separate target dyes from dye mixtures with the same charge, which has rarely been reported in previous studies. The focus of the paper is to develop a simple and efficient preparation method and improve the recyclability of materials to meet the challenges in current water treatment technologies.

### Key Problem Summary:
1. **Oil - Water Separation**: Develop a membrane material that can efficiently separate oil - water mixtures only by gravity without using external forces.
2. **Dye Removal**: Especially selectively remove specific dyes from dye mixtures containing the same charge, which is difficult to achieve with existing technologies.
3. **Multifunctionality of Materials**: The prepared membrane material not only has high - flux and separation efficiency, but also has good anti - fouling properties and recyclability.
4. **Environment - Friendly**: Use renewable and biodegradable natural polymers (such as cellulose) as raw materials to reduce environmental impacts.

### Solutions:
- **Material Design**: By in - situ growing La(OH)₃ nanosheets on cellulose nanofibers, a multifunctional membrane with high adsorption capacity and super - hydrophilic/under - water super - oleophobic characteristics was prepared.
- **Preparation Method**: A one - step electrospinning method was adopted, which simplifies the preparation process and improves the practicality and economy of the material.
- **Performance Optimization**: By adjusting the loading amount of La(OH)₃, the oil - water separation performance and dye adsorption capacity of the membrane material were optimized.

### Significance:
- **Technological Innovation**: A new multifunctional membrane material was proposed, providing new ideas for the development of water treatment technologies.
- **Practical Application**: This membrane material has broad application prospects in industrial wastewater treatment, environmental protection and other fields, especially in selectively removing specific dyes.
- **Environmental Impact**: Using renewable and biodegradable materials reduces the negative impact on the environment and meets the requirements of sustainable development.

Hope this information is helpful for you to understand the core content of the paper! If you have more specific questions or need further explanations, please feel free to let me know.