Abstract:Artificial Intelligence (AI) techniques are considered the most advanced approaches for diagnosing faults in power transformers. Dissolved Gas Analysis (DGA) is the conventional approach widely adopted for diagnosing incipient faults in power transformers. The IEC-599 standard Ratio Method is an accurate method that evaluates the DGA. All the classical approaches have limitations because they cannot diagnose all faults accurately. Precisely diagnosing defects in power transformers is a significant challenge due to their extensive quantity and dispersed placement within the power network. To deal with this concern and to improve the reliability and precision of fault diagnosis, different Artificial Intelligence techniques are presented. In this manuscript, an artificial neural network (ANN) is implemented to enhance the accuracy of the Rogers Ratio Method. On the other hand, it should be noted that the complexity of an ANN demands a large amount of storage and computing power. In order to address this issue, an optimization technique is implemented with the objective of maximizing the accuracy and minimizing the architectural complexity of an ANN. All the procedures are simulated using the MATLAB R2023a software. Firstly, the authors choose the most effective classification model by automatically training five classifiers in the Classification Learner app (CLA). After selecting the artificial neural network (ANN) as the sufficient classification model, we trained 30 ANNs with different parameters and determined the 5 models with the best accuracy. We then tested these five ANNs using the Experiment Manager app and ultimately selected the ANN with the best performance. The network structure is determined to consist of three layers, taking into consideration both diagnostic accuracy and computing efficiency. Ultimately, a (100-50-5) layered ANN was selected to optimize its hyperparameters. As a result, following the implementation of the optimization techniques, the suggested ANN exhibited a high level of accuracy, up to 90.7%. The conclusion of the proposed model indicates that the optimization of hyperparameters and the increase in the number of data samples enhance the accuracy while minimizing the complexity of the ANN. The optimized ANN is simulated and tested in MATLAB R2023a—Deep Network Designer, resulting in an accuracy of almost 90%. Moreover, compared to the Rogers Ratio Method, which exhibits an accuracy rate of just 63.3%, this approach successfully addresses the constraints associated with the conventional Rogers Ratio Method. So, the ANN has evolved a supremacy diagnostic method in the realm of power transformer fault diagnosis.

Research on Fault Diagnosis Technology for Ion Tube Based on Neural Network

Fault Diagnosis Method of High Power Charging Equipment Based on Neural Network

Research On Neural Network Fault Diagnosis Method Based On Dga For Large Transformer

Deep Learning Neural Network For Power System Fault Diagnosis

A Multistage Physics-Informed Neural Network for Fault Detection in Regulating Valves of Nuclear Power Plants

Research on Fault Detection Algorithm of Electrical Equipment Based on Neural Network

A Regularized DBN Based on Fault Diagnosis Model for Inductively Coupled Plasma System

Card fault diagnosis of the pressurized water reactor off-heap nuclear measurement system based on expert experience and convolutional neural network

Fault Diagnosis and Performance Evaluation for High Current LIA Based on Radial Basis Function Neural Network

Fault Diagnosis of Nuclear Power Plants Based on 1D-CNN with Dual Attention Mechanism

Fault detection and classification on insulated overhead conductors based on MCNN‐LSTM

Fault Diagnosis Method for Hydropower Station Measurement and Control System Based on ISSA-VMD and 1DCNN-BiLSTM

A CNN-LSTM–Based Model to Fault Diagnosis for CPR1000

Research on Transformer Fault Diagnosis Based on IWHO Optimized MS1DCNN Algorithm and LIF Spectrum

Combinatorial Techniques for Fault Diagnosis in Nuclear Power Plants Based on Bayesian Neural Network and Simplified Bayesian Network-Artificial Neural Network

Design and Implementation of Fault Diagnosis System for Power Internet of Things Equipment Based on Neural Network

Research of Fault Diagnosis and Location of Power Transformer Based on Convolutional Neural Network

BA-PNN-based methods for power transformer fault diagnosis

Power Transformer Fault Diagnosis Using Neural Network Optimization Techniques

A Novel Transformers Fault Diagnosis Method Based on Probabilistic Neural Network and Bio-Inspired Optimizer

Hybrid fuzzy and gated recurrent network based artificial intelligence approach for fault diagnosis and prognosis of transformers using dissolved gas analysis