Abstract:High temperature titanium alloys are being urgently developed owing to the requirements of advanced aerospace industry. Performance of the alloys in service under high-temperature environments always attracts great attention. In this study, variations of microstructure and mechanical property in TC25 (Ti-6.5Al-2Mo-1Zr-1Sn-1 W-0.2Si) dual-phase high temperature titanium alloy subjected to thermal exposure have been systematically investigated by coupling microstructural characterization, compositional analyses and mechanical measurement. It is found that strength is significantly enhanced while ductility is sharply degraded when the alloy is thermally exposed at 550 degrees C for a long duration of 100 h. Microstructural observations manifest that ternary alpha-needles (alpha t) are drastically precipitated from beta-ligaments inside transformed beta-matrix (beta trans) whilst alpha 2 (Ti3Al)-phase is produced from primary alpha-phase (alpha p) through ordered transformation. The precipitation of alpha t-needles is promoted by beta-phase metastability resulting from insufficient element partitioning in the initial microstructure. The beta-phase stability also renders alpha t-precipitation encounter size effect of beta-ligaments, where the precipitation is suppressed when beta-ligaments are thin in size. Both precipitation of alpha t-needles and alpha 2-phase triggers precipitation-hardening effect, which results in strain localization and thereby regresses alloy ductility. However, further analysis indicates that compared with alpha 2-phase, alpha t-precipitation plays more adverse role in embrittlement in the current alloy. This is different from thermal-exposed behavior of most of high temperature titanium alloys reported in literatures. These findings enrich our fundamental understanding on thermal stability of high temperature titanium alloys, and provide plausible implication to improve high temperature performance via controlling phase precipitation.

Revealing cellular reaction mechanisms and high-temperature structure stability in β-stabilized TiAl alloy

Revealing cellular reaction mechanisms and high-temperature structure stability in -stabilized TiAl alloy

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

Phase Transformation and Microstructure Evolution in Near-β Ti-7333 Titanium Alloy During Aging

Insights into Microstructural Stability and Embrittlement of TC25 High Temperature Titanium Alloy Subjected to Thermal Exposure

Phase Transformation and Microstructure Evolution of a Beta-Solidified Gamma-Tial Alloy

The phase transformation during the low temperature aging and low rate heating process of metastable titanium alloys

Phase Transformation And Microstructure Evolution In Near-Beta Ti-7333 Titanium Alloy During Aging

Heterogeneous Precipitate Microstructure Design in Β-Ti Alloys by Regulating the Cooling Rate

Orderly Nucleation and Competitive Growth Behaviors of Ti-Al Intermetallic Compounds in Ti/TiAl3 Diffusion Couple under High Temperature

Γ-Phase Transformation, Dynamic Recrystallization and Texture of a Forged TiAl-based Alloy Based on Plane Strain Compression at Elevated Temperature

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

In-situ investigation of β/α transformation in β-solidifying γ-TiAl alloys at different cooling rates

Hot Deformation Behavior and Dynamic Recrystallization of a Β-Solidifying TiAl Alloy

The role of the ω phase on the microstructure evolution of precipitation and mechanical property in Ti-3Al-5Mo-4Cr-2Zr-1Fe

Effect of Solution Temperature on Microstructure and Mechanical Properties of Ti–5Al5Mo5V3Cr1Zr Alloy

Microstructure Evolution and Nano-Precipitate of Multi-Stage Heat-Treated Ti–45Al–2Nb–2Cr-0.3C Alloy

Tailoring microstructure and mechanical performance of a β-solidifying TiAl alloy via martensitic transformation

Effects of Solution and Aging Treatment Parameters on the Microstructure Evolution of Ti–10V–2Fe–3Al Alloy