Abstract:The preparation of geopolymers from municipal solid waste incineration fly ash (IFA) for CO 2 adsorption is a promising way to enable waste recycling and reduce CO 2 emissions into the atmosphere. However, the development of these waste-derived geopolymers is currently limited by their low porosity. In this work, a novel geopolymer-zeolite (GZ) composite was synthetized from IFA via in-situ hydrothermal conversion of geopolymer sphere (GS). GS acted as a precursor, providing growth sites for zeolite formation and ensuring its compressive strength, while the resulting zeolite enhanced the porosity of geopolymer. The effects of hydrothermal temperature, seed crystal proportion and NaOH concentration on the porosity and CO 2 adsorption capacity of GZ were investigated. The results showed that the specific surface area and pore volume of GZ increased with the increase of hydrothermal temperature, but first increased and then decreased with the increase of seed crystal content and NaOH concentration. The maximum specific surface area (252.0 m 2 /g) and pore volume (0.54 cm 3 /g) of GZ was obtained when the hydrothermal temperature, seed crystal proportion and NaOH concentration were 180 °C, 30 wt% and 1 M, respectively. The best CO 2 uptake of GZ and GS were 2.06 and 0.63 mmol/g at 25 °C and 1 atm. It indicated that the new formed analcime crystals in GZ could improve CO 2 adsorption capacity. Besides, GZ showed high compressive strength (3.37 MPa) and good CO 2 cyclic stability (1.65 mmol/g) after 10 cycles. DFT calculations result showed that the CO 2 adsorption mechanism of GZ was chemisorption, which was different from that of GS. This work provides a perspective for preparing IFA-derived geopolymer-zeolite composites with high strength and excellent CO 2 adsorption capacity.

Compositional and synthesis time effect on the removal of Cu(II) and Zn(II) ion through adsorption using fly ash-based geopolymer: isotherms, kinetics, and thermodynamics

Copper Ion Removal by Adsorption Using Fly Ash-Based Geopolymers: Process Optimization Insights from Taguchi and ANOVA Statistical Methods

Optimization of coal fly ash-based porous geopolymer synthesis and application for zinc removal from water

Preparation and application of fly ash-based geopolymer for heavy metal removal

Adsorption/Desorption Performances of Simulated Radioactive Nuclide Cs+ on the Zeolite-Rich Geopolymer from the Hydrothermal Synthesis of Fly Ash

Structural characterizations of fly ash-based geopolymer after adsorption of various metal ions

Synthesis and adsorption performance of fly ash/steel slag based geopolymer for removal of Cu (II) and methylene blue

Experimental synthesis of geopolymer adsorbent based on molecular dynamics simulation and adsorption mechanism of uranium in different channel sizes

Preparation of a fly ash-based porous geopolymer material for copper ion removal

The use of zeolite-based geopolymers as adsorbent for copper removal from aqueous media

Preparation of a surface modified fly ash-based geopolymer for removal of an anionic dye: Parameters and adsorption mechanism

Behaviors and Mechanisms of Adsorption of MB and Cr(VI) by Geopolymer Microspheres under Single and Binary Systems

Preparation of a Porous Geopolymer (SPG) to be Used as an Adsorbent for Cu2+ Removal

Synthesis of geopolymers from fly and bottom ashes of a thermoelectrical power plant for metallic ions adsorption

Unraveling the cation adsorption of geopolymer binder: A molecular dynamics study

Research and Application Progress of Geopolymers in Adsorption: A Review

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer.

Application of CO2-loaded geopolymer in Zn removal from water: A multi-win strategy for coal fly ash disposal, CO2 emission reduction, and heavy metal-contaminated water treatment

Review on the effect collision between hazardous metal ions and geopolymer as adsorbents or in situ stabilization/solidification

Synthesis of geopolymer-zeolite composite from municipal solid waste incineration fly ash and their performance for CO 2 adsorption