Abstract:With the fast consumption of traditional fossil fuels and the urgent requirement for a low-carbon economy and sustainable development, supercapacitors are gaining more and more attention as a clean energy storage and conversion device. The research on electrode materials for supercapacitors has become a hot topic nowadays. An electrode material for a supercapacitor, comprising the ZIF-67 in-built carbon-based material, was prepared from a biomass pre-hydrolysate via a hydrothermal process. As a by-product of dissolving slurry, the pre-hydrolysate is rich in carbon, which is an excellent biomass resource. The utilization of pre-hydrolysate to prepare carbon energy materials could realize the high value utilization of pre-hydrolysate and the efficient energy conversion of biomass. Meanwhile, the cobalt-based MOF (such as ZIF-67), as a porous crystalline material, has the advantages of having a regular order, high specific surface area and controllable pore size, as well as good thermal and chemical stability. The addition of ZIF-67 modified the morphology and pore structure of the carbon, and the obtained samples showed outstanding electrochemical performance. One- and two-step synthetic processes generated specimens with a coral-like cross-linked structure and a new type of rough, hollow, dandelion-like structure, respectively, and the pore size was in the range of 2.0–5.0 nm, which is conducive to ion transport and charge transfer. In C2-ZIF-67, the hollow structures could effectively prevent the accumulation of the electrochemical active center, which could provide enough space for the shrinkage and expansion of particles to protect them from the interference of electrolytes and the formation of solid electrolyte interphase film layers. Additionally, the plush tentacle structure with low density and a large specific surface area could expose more active sites and a large electrolyte electrode contact area, and short electron and charge transport paths. Importantly, active, free electrons of small amounts of Co-MOF (1 wt%) could be stored and released through the redox reaction, further improving the electrical conductivity of Carbon-ZIF-67 materials in this work. Consequently, C2-ZIF-67 exhibited superior specific capacitance (400 F g−1, at 0.5 A g−1) and stability (90%, after 10,000 cycles).

Preparation of carbon-based monolith with macroporous-mesoporous structure derived from PVDF hollow fiber membranes for supercapacitors

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Co2SiO4/CoO Heterostructure Anchored on Graphitized Carbon Derived from Rice Husks with Hierarchical Pore As Electrode Material for Supercapacitor

Ordered hierarchical mesoporous/microporous carbon with optimized pore structure for supercapacitors

An in-situ Blowing-etching strategy for preparation of Macro-meso-micro hierarchical porous carbon and its supercapacitive property

A N-doped Cobalt@graphitized carbon material derived from ZIF-67 assisted polyvinylidene fluoride hollow fiber membrane for supercapacitors

Carbon hollow fibers with tunable hierarchical structure as self-standing supercapacitor electrode

Mesoporous Carbon Nanofibers for Supercapacitor Application

N-doped hollow carbon nanoplates with mesoporous thin shells towards high-performance supercapacitors

Rational Fabrication of Semi-Interpenetrating Three-Dimensional Hierarchical Carbon Materials for High-Performance Symmetric Supercapacitor

Preparation of novel 3D hierarchical porous carbon membrane as flexible free-standing electrode for supercapacitors

Design and structure optimization of 3D porous graphitic carbon nanosheets for high-performance supercapacitor

Lignin-derived Interconnected Hierarchical Porous Carbon Monolith with Large Areal/Volumetric Capacitances for Supercapacitor

Coral-like interconnected porous carbon derived from phenolic resin/ammonium alginate composite for high-rate supercapacitor

Biobased Nano Porous Active Carbon Fibers for High-Performance Supercapacitors

3D hierarchical porous carbon matching ionic liquid with ultrahigh specific surface area and appropriate porous distribution for supercapacitors

In-situ Activation for Optimizing Meso-/Microporous Structure of Hollow Carbon Shells for Supercapacitors

In-Built Fabrication of MOF Assimilated Porous Hollow Carbon from Pre-Hydrolysate for Supercapacitor

3D Porous VOx/N-Doped Carbon Nanosheet Hybrids Derived from Cross-Linked Dicyandiamide–Chitosan Hydrogels for Superior Supercapacitor Electrode Materials

Porous hollow Co₃O₄ with rhombic dodecahedral structures for high-performance supercapacitors

Synthesis of microporous carbon nanofibers with high specific surface using tetraethyl orthosilicate template for supercapacitors