Abstract:Syngas conversion is a key platform for efficient utilization of various carbon-containing resources including coal, natural gas, biomass, organic wastes, and even CO2. One of the most classic routes for syngas conversion is Fischer-Tropsch synthesis (FTS), which is already available for commercial application. However, it still remains a grand challenge to tune the product distribution from paraffins to value-added chemicals such as olefins and higher alcohols. Breaking the selectivity limitation of the Anderson-Schulz-Flory (ASF) distribution has been one of the hottest topics in syngas chemistry.Metallic Co0 is a well-known active phase for Co-catalyzed FTS, and the products are dominated by paraffins with a small amount of chemicals (i.e., olefins or alcohols). Specifically, a cobalt carbide (Co2C) phase is typically viewed as an undesirable compound that could lead to deactivation with low activity and high methane selectivity. Although iron carbide (FexC) can produce olefins with selectivity up to ∼60%, the fraction of methane is still rather high, and the required high reaction temperature (300-350 °C) typically causes coke deposition and fast deactivation. Recently, we discovered that Co2C nanoprisms with preferentially exposed facets of (020) and (101) can effectively produce olefins from syngas conversion under mild reaction conditions with high selectivity. The methane fraction was limited within 5%, and the product distribution deviated greatly from ASF statistic law. The catalytic performances of Co2C nanoprisms are completely different from that reported for the traditional FT process, exhibiting promising potential industrial application.This Account summarizes our progress in the development of Co2C nanoprisms for Fischer-Tropsch synthesis to olefins (FTO) with remarkable efficiencies and stability. The underlying mechanism for the observed unique catalytic behaviors was extensively explored by combining DFT calculation, kinetic measurements, and various spectroscopic and microscopic investigation. We also emphasize the following issues: particle size effect of Co2C, the promotional effect of alkali and Mn promoters, and the role of metal-support interaction (SMI) in fabricating supported Co2C nanoprisms. Specially, we briefly review the synthetic methods for different Co2C nanostructures. In addition, Co2C can also be applied as a nondissociative adsorption center for higher alcohol synthesis (HAS) via syngas conversion. We also discuss the construction of a Co0/Co2C interfacial catalyst for HAS and demonstrate how to tune the reaction network and strengthen CO nondissociative adsorption ability for efficient production of higher alcohols. We believe that the advances in the development of Co2C nanocatalysts described here present a critic step to produce chemicals through the FTS process.

Carbon defects promoting syngas into liquid fuels over Fe 3 C@C catalysts

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Enhanced Conversion of Syngas to Gasoline-Range Hydrocarbons over Carbon Encapsulated Bimetallic FeMn Nanoparticles

Selective synthesis of the core–shell structured catalyst χ-Fe 5 C 2 surrounded by nanosized Fe 3 O 4 for the conversion of syngas to liquid fuels

Effect of Graphitic Carbon Modification on the Catalytic Performance of Fe@SiO2-GC Catalysts for Forming Lower Olefins Via Fischer-Tropsch Synthesis.

Boosting liquid hydrocarbons selectivity from CO2 hydrogenation by facilely tailoring surface acid properties of zeolite via a modified Fischer-Tropsch synthesis

θ-Fe3C dominated Fe@C core–shell catalysts for Fischer-Tropsch synthesis: Roles of θ-Fe3C and carbon shell

Enhanced Fischer-Tropsch synthesis performance on fe + ZSM5 bifunctional catalysts

Nanocrystalline Iron–boron Catalysts for Low-Temperature CO Hydrogenation: Selective Liquid Fuel Production and Structure–activity Correlation

Shielding the Hägg Carbide by a Graphene Layer for Ultrahigh Carbon Efficiency During Syngas Conversion

Selective fabrication of χ-Fe5C2 by interfering surface reactions as a highly efficient and stable Fischer-Tropsch synthesis catalyst

Supported Fe2C catalysts originated from Fe2N phase and active for Fischer-Tropsch synthesis

Selective CO 2 hydrogenation to liquid fuels over Na-decorated FeMgMnOx catalyst with high carbon efficiency

Enhanced conversion of syngas to high-quality diesel fuel over ZrO 2 and acidized carbon nanotube bifunctional catalyst

Uniformity Dispersive, Anti-Coking Core@double-Shell-structured Co@SiO2@C: Effect of Graphitic Carbon Modified Interior Pore-Walls on C5+ Selectivity in Fischer-Tropsch Synthesis

Cobalt Carbide Nanocatalysts for Efficient Syngas Conversion to Value-Added Chemicals with High Selectivity

Bifunctional CoFe/HZSM-5 Catalysts Orient CO2 Hydrogenation to Liquid Hydrocarbons

Functionalized Carbon Materials in Syngas Conversion

Direct hydrogenation of CO 2 to liquid hydrocarbons over K/Fe-C catalysts: Effect of porous carbon matrix and K modification

The Importance of Sintering‐Induced Grain Boundaries in Copper Catalysis to Improve Carbon‐Carbon Coupling

Recent advances in Co2C-based nanocatalysts for direct production of olefins from syngas conversion