Modeling and optimization of atmospheric CO 2 capture for neutralization of high alkaline wastewaters using response surface methodology

Luís Madeira,Margarida Ribau Teixeira,Fátima Carvalho
DOI: https://doi.org/10.1016/j.jcou.2024.102705
IF: 7.7
2024-02-21
Journal of CO2 Utilization
Abstract:Lab-scale stirrer bubble and lab-scale stepped continuous flow capillary columns were developed to neutralize lime precipitation treated slaughterhouse wastewater (SWW) and recover the volatilized ammonia, using atmospheric CO 2 . These experiments were carried out using central composite design based on the response surface methodology. The carbonation process occurred in both processes. For the bubbling process, numerical optimization indicated a final pH of 8 with calcium and ammonium nitrogen removals of 76.0 and 66.2%, respectively, applying 21 h, air flow rate at 65 L h −1 , the stirring speed at 52 rpm, and SWW volume at 178 mL. It was also observed that increasing the air flow rate can avoid the stirring step. For the capillary process, a pH of 8.2 and calcium and ammonium nitrogen removals of 81.0 and 57.5% were achieved, applying a SWW flow rate at 1.2 mL min −1 , air flow rate at 90 L h −1 , and capillary area at 700 cm 2 . Under optimal conditions, the flow capillary column was able to neutralize different SWW volumes, 178–478 mL, without significant differences in the collected samples, with the operation time varying between 4.48 and 10.20 h, respectively.
engineering, chemical,chemistry, multidisciplinary
What problem does this paper attempt to address?