Digital Light Processing 3D‐Printed Porous Yttria‐Stabilized Zirconia with High‐Thermal Shock Resistance
Moein Khakzad,Mahdi Mosadegh,Zahra Sepasi,Ehsan Mehrdad,Zachary Alsup,Majid Minary‐Jolandan
DOI: https://doi.org/10.1002/adem.202400206
IF: 3.6
2024-09-13
Advanced Engineering Materials
Abstract:Porous yttria‐stabilized zirconia ceramics with 6–40% porosity are fabricated using vat photopolymerization 3D printing. The porous ceramics exhibit a Weibull modulus of 5.3, a characteristic strength of over 36 MPa, and a thermal shock resistance up to 500 °C, demonstrating potential for improved efficiency and reduced fabrication costs in solid oxide fuel cells and electrolysis cells. Advances in vat photopolymerization 3D printing have the potential to significantly improve the production of ceramic materials for electrochemical energy devices. Solid oxide fuel cells (SOFCs) and solid oxide electrolysis cells (SOECs) necessitate high‐resolution ceramic manufacturing methods, as well as precisely controlled porosity (≈20–40%) for optimal gas transport. Achieving a balance between this porosity and mechanical integrity, especially under thermal stress, remains a challenge. Herein, the successful fabrication of porous yttria‐stabilized zirconia (YSZ) ceramics using vat photopolymerization 3D printing is demonstrated, achieving porosities ranging from 6% to 40% and corresponding grain sizes of ≈80–550 nm. It is found that 3D‐printed YSZ with ≈33% porosity exhibited a Weibull modulus of m = 5.3 and a characteristic strength of over 36 MPa. In the investigation, it is further revealed that these ceramics can withstand thermal shock up to 500 °C, retaining over 70% of their flexural strength. This remarkable performance suggests significant potential for 3D‐printed porous YSZ in SOFCs and SOECs, paving the way for potential improved efficiency, reduced fabrication costs, and innovative designs in these next‐generation clean energy technologies.
materials science, multidisciplinary