Abstract:Engineering a hollow architecture has been regarded as an efficient strategy for boosting energy storage and conversion. Herein, hollow hierarchical carbon nanotubes coupled with MoS2 nanosheets were successfully designed and fabricated to construct high-performance lithium-/sodium-ion batteries. A tubular Mo–polydopamine hybrid precursor was formed by a simple metal chelation reaction and a self-template effect, and subsequently in situ converted into MoS2 nanosheets embedded into carbon nanotubes after heat treatment. Benefiting from the synergistic effect between strong coupling hierarchical carbon/MoS2 nanosheets and a tubular hollow structure, the as-prepared electrode exhibited an outstanding storage capacity and an ultrastable cycling stability for lithium-/sodium-ion storage. Evaluated as an anode for a lithium-ion battery, it presented a high-rate capacity of 1228.2 mA h g–1 at 1000 mA g–1. As for a sodium-ion battery, a capacity of 210.1 mA h g–1 can be maintained after 9000 cycles under a high current density of 8000 mA g–1. The storage mechanism analysis indicated that the charge–discharge process was dominated by a pseudocapacitive behavior. The present work highlights the synthesis of electrode materials with a hierarchical hollow structure to boost the development of electrochemical energy storage.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.1c01747.SEM images and TEM images of the as-obtained MoO3 nanowires; XRD pattern of the as-obtained MoO3 nanowires; XRD pattern of the hierarchical Mo-PDA hybrid; SEM image of the hierarchical Mo-PDA hybrid; HRTEM images of hierarchical C-MoS2 NT; EDX spectrum of hierarchical C-MoS2 NT; XPS survey spectrum of C-MoS2 NTs; Raman spectrum of C-MoS2 NTs; nitrogen adsorption/desorption isotherm and pore size distribution; TGA pattern of C-MoS2 NT; charge–discharge voltage profiles; CV profiles; b-value analysis; capacitive charge storage contribution; GITT curve of the C-MoS2 NT anode; Li+ diffusion coefficient; Nyquist plots; and comparison of our data with the related literature data for SIBs (PDF)This article has not yet been cited by other publications.

Carbon-coated MoS1.5Te0.5 nanocables for efficient sodium-ion storage in non-aqueous dual-ion batteries

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Te-doping induced C@MoS<sub>2-x</sub>Te<sub>x</sub>@C nanocomposites with improved electronic structure as high-performance anode for sodium-based dual-ion batteries

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Te-doping induced C@MoS2-xTex@C nanocomposites with improved electronic structure as high-performance anode for sodium-based dual-ion batteries

Ultrafine MoO2-Carbon Microstructures Enable Ultralong-Life Power-Type Sodium Ion Storage by Enhanced Pseudocapacitance

MoS2‐Coupled Carbon Nanosheets Encapsulated on Sodium Titanate Nanowires As Super‐Durable Anode Material for Sodium‐Ion Batteries

Enhanced reversible sodium storage by thin carbon layer encapsulated MoS2 nanospheres on interwoven carbon nanotubes

Confining MOF-derived SnSe nanoplatelets in nitrogen-doped graphene cages via direct CVD for durable sodium ion storage

Rational Design of Embedded CoTe2 Nanoparticles in Freestanding N-Doped Multichannel Carbon Fibers for Sodium-Ion Batteries with Ultralong Cycle Lifespan

Carbon-coated MoS2 Nanosheets@cnts-Ti3c2 MXene Quaternary Composite with the Superior Rate Performance for Sodium-Ion Batteries

Stable Li+/Na+ Batteries with Anodes Boosted by Hollow Tubular-Structured MoS2 Nanosheet/N-Doped Carbon Nanosheet Composites

Stable Li + /Na + Batteries with Anodes Boosted by Hollow Tubular-Structured MoS 2 Nanosheet/N-Doped Carbon Nanosheet Composites

MoS2 Nanosheets with Conformal Carbon Coating As Stable Anode Materials for Sodium-Ion Batteries

Spatial Confinement of Co1.67Te2 Nanoparticles Within Porous Carbon Nanofibers Enabling Fast Kinetics and Stability for Sodium Dual-Ion Batteries

Bi-metal Sulfides Embedded in MOF-derived N-doped Carbon Polyhedral Nanocages for High-performance Lithium-ion Batteries

MoS2/MoO2 Nanosheets Anchored on Carbon Cloth for High-Performance Magnesium-and Sodium-Ion Storage

Fabrication of an Anode Composed of a N, S Co-Doped Carbon Nanotube Hollow Architecture with CoS2 Confined Within: Toward Li and Na Storage

Controllable Design of MoS2 Nanosheets Grown on Nitrogen-Doped Branched TiO2 /C Nanofibers: Toward Enhanced Sodium Storage Performance Induced by Pseudocapacitance Behavior.

In-situ Conversion Growth of Carbon-Coated MoS2/N-doped Carbon Nanotubes As Anodes with Superior Capacity Retention for Sodium-Ion Batteries

MoS2@CoS2 Heterostructured Tube-in-tube Hollow Nanofibers with Enhanced Reaction Reversibility and Kinetics for Sodium-Ion Storage