Abstract:Biodegradable films with catalytic and self‐cleaning properties were developed; The double‐layer films allowed greater surface arrangement of the catalyst and 70% higher photocatalytic activity when compared to monolayer; The heterojunction with α‐Fe2O3 provided greater photoactivity for BiOI; The composite films with BiOI and BiOI/α‐Fe2O3 showed photoactivity in the visible range, an improvement over films with TiO2. Self‐cleaning hydrophobic films were developed using polyhydroxybutyrate (PHB), enhanced with titanium dioxide (TiO2), bismuth oxyiodide (BiOI), and a BiOI/α‐Fe2O3 heterojunction. This is the first study to analyze the photoactivity of BiOI and BiOI/α‐Fe2O3 immobilized into PHB. Alternative solvents for dissolving PHB were investigated. Additionally, formation methods such as casting in Petri dishes, as well as controlled thickness casting through non‐solvent‐induced phase separation (NIPS), and evaporation‐induced phase separation (EIPS), were employed and compared. Despite differing morphologies, both NIPS and EIPS films exhibited similar photocatalytic activity, suggesting that only the catalyst on the external surface of the film is active. The highest pseudo first‐order apparent kinetic constant (0.1468 ± 0.0015 min−1 g−1) was found in films with the lowest polymer and catalyst concentrations analyzed (5% wPHB/wCHCl3 and 3% wTiO2/wPHB ). A double‐layer film preparation method was proposed to enhance photocatalytic activity, resulting in a 70% increase in the kinetic constant (0.2506 ± 0.0019 min−1 g−1). Double‐layer composite films with BiOI and BiOI/α‐Fe2O3 showed photocatalytic activity comparable to TiO2 under UV–visible light. Furthermore, their photocatalytic activity under visible light was confirmed, unlike TiO2, which exhibits a negligible kinetic constant in this wavelength range.

Self‐cleaning films of biopolymer polyhydroxybutyrate with different semiconductors incorporation: Development, characterization, and photocatalytic activity evaluation