Abstract:Simultaneously achieving high-quality catalytic cracking of light tar, maintaining a large target product yield and improving the reductivity of iron ore, is major step towards enhancing the energy conversion efficiency of the coal chemical industry and ironmaking applications. To achieve the aforementioned goals, an experiment involving regulation under coal pyrolysis, with iron ore as a catalytic bed, optimization of carbon deposition in spent samples and integration of multiple similar reaction factors between the pyrolysis of experimental samples and volatile decomposition-carbon deposition was designed. The mass fraction and yield of the light tar produced when the pyrolysis tar is passed through a goethite bed are 75.1 % and 5.34 % at the upper reactor temperature of 550 degrees C, respectively, which are higher than those of the other two iron ore. Additionally, because the iron ore contains carbon deposits at the nanometre scale, compared with the original iron ore, the spent sample exhibits a peculiar phenomenon in which the reactivity increases. The reduction degree, metallization ratio of the iron ore and kinetic characteristics are compared and analysed, confirming a response mechanism to enhance the reduction degree on various fluctuating factors at temperatures exceeding 800 degrees C, and revealing that the reduction reaction occurs consecutively in four consecutive according to the efficiency of the conversion. In absence of sufficient CO2 in the reaction and according to the calculated activation energy, the carbon gasification reaction was identified as a rate-limiting step in the reduction reaction. The activation energy and rate-limiting step provide a pathway featuring pollution reduction, clean energy and energy conservation aimed towards the deployment of integrated technology for tar upgrading and iron ore reduction.

The characteristics and mechanism of ultrafine iron ore powder reduction by coal under mechanical activation

Reduction behavior of iron ore powder by high-volatile coal in thermogravimetric–gas chromatographic and kinetic analysis

Experimental Study on the Thermal Reduction of CO2 by Activated Solid Carbon-Based Fuels

REDUCTION KINETICS OF IRON OXIDE IN CARBON-BEARING PELLETS MADE FROM DUSTS CONTAINING ZINC AND LEAD

Study on the reduction of Fe2O3 pellets by CO-CO2 and H2-H2O: Reaction kinetics and pore network model

EXPERIMENTAL STUDY ON THE REDUCTION OF IRON ORE AND COAL MIXED PELLETS OF HIGH PHOSPHORUS HEMATITE PRE-TREATED BY MICROWAVE IRRADIATION

Study on the Reactivity Activation of Coal Gangue for Efficient Utilization

Study on the factors affecting the deep reduction of coal gangue containing high contents of iron and sulfur

Kinetic analysis of iron ore powder reaction with hydrogen—carbon monoxide

Non-isothermal reduction kinetics of oolitic iron ore in ore/coal mixture

The Rate-Limiting Step in the Integrated Coal Tar Decomposition and Upgrading-Iron Ore Reduction Reaction Determined by Kinetic Analysis

Study on the Bath Smelting Reduction Reaction and Mechanism of Iron Ore: A Review

Evolution Mechanism of Carbon Covalent Bond during Coal Activation Using Mixed Atmosphere of H2O and CO2

Influence of Iron Ore Addition on Metallurgical Reaction Behavior of Iron Coke Hot Briquette

An efficient and clean utilization technique for red mud based on fluidized bed carbon monoxide reduction

Effects of Iron Minerals Embedded in Coal with Different Methods on the Distribution of Pyrolysis Products and the Gasification Reactivity of Its Pyrolysis Char

Experimental Study on Impact of Iron Coke Hot Briquette As an Alternative Fuel on Isothermal Reduction of Pellets under Simulated Blast Furnace Conditions

Investigation on the Activation of Coal Gangue by A New Compound Method

Effect of mechanical energy input during mechanical crushing on the macrokinetics of the coal–oxygen reaction: A laboratory–scale study

Kinetic Analysis of Isothermal and Non-Isothermal Reduction of Iron Ore Fines in Hydrogen Atmosphere

Insights into direct reduction iron using bamboo biomass as a green and renewable reducer: Reduction behavior study and kinetics analysis