Abstract:The pharmaceutical residues from chemical synthesis pharmaceutical industry often contain some alkali salts due to the widely use of alkali salts in the manufacturing process, the waste management of such is a significant challenge. Generally, the residues are disposed by landfill and incineration. However landfill is unsustainable and the incineration's efficiency is effected by furnace slag-bonding during combustion, that affects the widely use of incineration. On the other hand, molten salt oxidation is an efficient, flameless thermal process, has the inherent capability of destroying organic constituents of wastes while retaining the inorganic constituents in the molten salt. Therefore, a new access is proposed by disposing the residues using molten salt oxidation. A high salt content pharmaceutical residue that contains 28.82wt% Na has been selected as the sample. Molten salt oxidation experiments have been conducted in a lab-scale molten salt reactor using a ternary salt (Li,Na,K)2CO3. The experimental parameters investigated here are the temperature of molten salt and the excess air factor. The concentrations of the CO, NOx and SOx in the off-gas are monitored on-line. Results show that the concentration of CO decreases with temperature increasing, especially at temperature higher than 600̊C. The SOx in the off-gas has been detected rarely, irrespective of the operating conditions. When the temperature is below 700̊C, the concentrations of NOx in the off-gas are under 200ppm, but as the temperature reached 700̊C, due to the nitrite in salt bath begins to decompose, the concentration increases dramatically, suggests the operating temperature should below 700̊C in order to suppress the emission of NOx. Compared to the temperature's role, the effect on the residue's oxidation of the excess air factor is relative small. In the drained salt no char has been found and the XRD analysis shows that the main content of the salt is still (Li,Na,K)2CO3. The results of our study show molten salt oxidation is a promising alternative technology for the disposal of high salt content pharmaceutical residues from the chemical synthesis pharmaceutical industry, and it may be also suitable for other high salt content residues from the fine chemical industry, however, more research is needed to verify this possibility.

Study on molten salt oxidation process of simulated Co doped cation exchange resins

Efficient fixation of Co2+ and organic sulfur from cation exchange resins into CaO enhanced molten Li2CO3-Na2CO3-K2CO3 system

Thermal decomposition and oxidation of cation exchange resins with and without Na 2 CO 3 –K 2 CO 3 salt

Effect of copper ions on transformation of organic sulfur in cationic exchange resins in Li2CO3–Na2CO3–K2CO3 molten-salt system

Catalytic effect of cobalt ion on oxidative pyrolysis of cation exchange resin

Catalytic effect of cesium on the oxidation behavior of cation exchange resins in Li2CO3-Na2CO3-K2CO3 melt

Study on the destruction process of cationic exchange resins treated by Li2CO3-Na2CO3-K2CO3 molten salt

Modification Of A Novel Macroporous Silica-Based Crown Ether Impregnated Polymeric Composite With 1-Dodecanol And Its Adsorption For Some Fission And Non-Fission Products Contained In High Level Liquid Waste

Effect of feeding amount on tail gas and waste salt obtained from molten salt oxidation process of cation exchange resins

Influence of oxygen equivalent on molten salt oxidation efficiency of mixed resin in Li2CO3-Na2CO3-K2CO3 melt

Co2+/PMS based sulfate-radical treatment for effective mineralization of spent ion exchange resin

Effects of oxygen content on gaseous and solid products during molten salt oxidation of cation exchange resins

The conversion of organic sulfur and strontium into inorganic compounds during the molten salt oxidation of mixed resin

Oxidative decomposition properties of cationic exchange resins producing SO4(2-) in power plants

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Treatment of spent radioactive cationic exchange resins used in nuclear power plants by Fenton-like oxidation process

Experimental Study on Molten Salt Oxidation of High Salt Content Pharmaceutical Residue

Functionalized dithiocarbamate chelating resin for the removal of Co2+ from simulated wastewater

Decomposition mechanisms of nuclear-grade cationic exchange resin by advanced oxidation processes: Statistical molecular fragmentation model and DFT calculations

Optimization and Mechanism Study on Destruction of the Simulated Waste Ion-Exchange Resin from the Nuclear Industry in Supercritical Water

The effect of air on oxidation decomposition of uranium-containing cationic exchange resins in Li 2 CO 3 –Na 2 CO 3 –K 2 CO 3 molten-salt system