Abstract:<p>Two significant design strategies for mitigating building energy consumption are daylight redirection and solar energy harvesting. Effective daylighting implementation enhances the amount of useful natural light within a space and offsets the need for electric lighting. Solar energy harvesting systems can mitigate energy costs from mechanical systems by managing incoming thermal loads or capturing solar energy that can be used to supplement thermal systems in the building. While there are many available façade-based technologies that can perform daylighting or solar thermal energy harvesting, there remains a limitation in available systems that can perform both of them simultaneously. This paper, describes the design and experimental demonstration of a Liquid Filled Prismatic Louver (LFPL) system, which combines both energy-saving strategies. The LFPL system was installed in a south-facing room in New York City and evaluated for indoor daylight penetration and potential for thermal energy harvesting. Daylight redirection is achieved through the prismatic louver geometry and proper orientation, whereas thermal energy harvesting is achieved through IR absorption from the liquid (e.g., water) within the prisms. Daylighting performance was evaluated by illuminance measurements at key locations within the space, whereas thermal harvesting performance was evaluated through temperature measurements and thermal imaging analysis. We show that the LFPL system, with all prismatic elements oriented at the same angle, achieve a 2-fold and 8-fold enhancement in daylight redirection to the ceiling, for prism orientations of 10° and 20°, respectively. We also demonstrate the system's capability to adjust to specific lighting needs, within the space, through the dynamic individual orientation of prismatic elements; thus, achieving a concentrated ceiling illuminance enhancement of ~100 times and ~200 times at 2.5 and 4.3 m away from the window sill, providing workplane illuminance enhancement of 6 and 2 times more than in the case of the control room with regular windows. Furthermore, we show a reduction of potential heating loads at locations close to the window from the combination of infrared absorption in the water volume and the redirection of the incoming solar radiation, leading to a reduction of the workplane temperature by an average of 7–10 °C.</p>

Daylight Distribution Improvement Using Automated Prismatic Louvre

A Study on Daylighting Performance of Split Louver with Simplified Parametric Control

Analysis of dynamic louver control with prism redirecting fenestrations for office daylighting optimization

A Simulation-Aided Approach in Examining the Viability of Passive Daylighting Techniques on Inclined Windows

Improvements in Energy Savings and Daylighting Using Trapezoid Profile Louver Shading Devices

Experimental demonstration and performance evaluation of a complex fenestration system for daylighting and thermal harvesting

Potential annual daylighting performance of a high-efficiency daylight redirecting slat system

Daylighting Characteristics and Experimental Validation of a Novel Concentrating Photovoltaic/daylighting System

A study of luminous environment with prism daylight redirecting fenestrations in classrooms

Solar Angle Model for Daylight Redirection in Prismatic Panel

Study on the effect of photovoltaic louver shading and lighting control system on building energy consumption and daylighting

The Energy Saving Potential in an Office Building Using Louvers in Mid-Latitude Climate Conditions

A Novel Concentrating Photovoltaic/daylighting Control System: Optical Simulation and Preliminary Experimental Analysis

Analysis and quantification of effects of the diffuse solar irradiance on the daylighting performance of the concentrating photovoltaic/daylighting system

Daylight Performance of Integrated Horizontal Light Pipe with Shading Devices (Validation) for High-Rise Building in Tropical Climate

Investigating the influence of perforated façade skins on indoor illuminance level: a case study

Balancing daylight, glare, and energy-efficiency goals: An evaluation of exterior coplanar shading systems using complex fenestration modeling tools

Draw to Shade: A Personalized Daylighting Regulation Method Through User-Involved Paintings for Enhanced Indoor Visual Comfort and Aesthetics Experience

Evaluation and Design of Parameterized Dynamic Daylighting for Large-Space Buildings

Interactive selection of optimal fenestration materials for schematic architectural daylighting design

Review of Advanced Daylighting Systems