Mode switching and standing-travelling waves in slug flow-induced vibration of catenary riser
Hongjun Zhu,Yue Gao,Narakorn Srinil,Yan Bao
DOI: https://doi.org/10.1016/j.petrol.2020.108310
IF: 5.168
2021-08-01
Journal of Petroleum Science and Engineering
Abstract:<p>An experiment in a small-scale air-water test loop is performed to investigate the flow-induced vibration behaviors of a flexible catenary riser conveying slug flow over a wide range of the gas-to-liquid flow rate ratios from 1.0 to 4.5. The clamped-clamped riser model has an inner diameter of 4 mm and an aspect ratio with the length over the inner diameter of about 360. The non-intrusive high-speed cameras are employed to simultaneously capture the catenary riser dynamics and the internal unsteady slug flow characteristics. The space-time varying features of the slug flow-induced vibration are presented and discussed in terms of the response amplitudes, frequencies, modal components, and associated flow-induced forces. Slug flow properties including the translational velocities, lengths, fluctuation frequencies and pressure changes are reported. When increasing the ratio of the gas-to-liquid flow rates, experimental results highlight how a variation of the slug length and frequency contributes to a mode-switching phenomenon over time. This switching from the dominant first-mode frequency to the dominant second-mode frequency leads to the associated transition from the standing wave to the travelling wave of the catenary riser response. The response amplitudes are amplified by the increased translational velocity and slug length, entailing the increased flow-induced momentum and gravitational forces, as the gas-to-liquid flow rate ratio is increased. Consequently, higher vibration modes participate into the riser dynamics exhibiting a strong multi-mode competition.</p>
energy & fuels,engineering, petroleum