Abstract:Lithium-ion battery is the technology of choice in the development of electric vehicles. This technology is now mature although there are still many challenges to increase their energy density while ensuring an irreproachable safety of use. For this goal, it is necessary to develop new cathodic materials that can be cycled at higher voltages and electrolytes compatible with these materials. But the challenge does not only concern the production of efficient batteries for the electrochemical storage of energy since lithium-ion battery technology relies on the use of critical and/or strategic value resources. It is therefore crucial to include Lithium-ion batteries development in a circular economy approach very early. In particular, optimized recycling and reuse of battery components must both minimize their impact on the environment and limit geopolitical issues related to tensions on the mineral resources necessary for lithium-ion battery production. Although recycling will never replace mining, it reduces resource dependence by ensuring the presence of exploitable resources in the territory, which is particularly important for countries like France where exploited or exploitable resources are limited. This conference addresses the development of a new hydrometallurgical process combining leaching of cathodic material from spent lithium-ion battery in acidic chloride media and solvent extraction process. Most of recycling processes reported in the literature rely on the sulphate route and a few studies investigate the potentialities of the chloride route despite many advantages and the possibility to develop new chemistry, which could get easier the metal separation. The leaching mechanisms and the solvent extraction equilibria will be presented in this conference. Based on the comprehension of the physicochemistry of leaching and solvent extraction, the present study will introduce a new hydrometallurgical process for the production of cobalt, nickel, manganese and lithium from spent cathodic materials.

Comparative environmental and economic assessment of emerging hydrometallurgical recycling technologies for Li-ion battery cathodes

Life cycle assessment of hydrometallurgical recycling for cathode active materials

Comparative life cycle analysis of critical materials recovery from spent Li-ion batteries

Environmental impact and economic assessment of recycling lithium iron phosphate battery cathodes: Comparison of major processes in China

Assessment of an Eco-efficient Process for the optimization of metal recovery in Lithium Cobalt Oxide and Lithium Nickel Manganese Cobalt Oxide Batteries

Closed-Loop Recycling of Lithium, Cobalt, Nickel, and Manganese from Waste Lithium-Ion Batteries of Electric Vehicles

Emerging Processes for Sustainable Li‐Ion Battery Cathode Recycling

Leaching of valuable metals from cathode active materials in spent lithium-ion batteries by levulinic acid and biological approaches

Comparison of Hydrometallurgical and Hybrid Recycling Processes for Lithium-ion Battery: An Environmental and Cost Analysis

Acidic Chloride Leaching of NMC Cathodes Combined with Solvent Extraction for the Production of Value Metals from Spent Lithium-Ion Battery

Experimental Study on Recycling of Spent Lithium-Ion Battery Cathode Materials

Novel approach to recycling of valuable metals from spent lithium-ion batteries using hydrometallurgy, focused on preferential extraction of lithium

Recycling and Disposal of Lithium Battery: Economic and Environmental Approach

Leaching Mechanisms of Recycling Valuable Metals from Spent Lithium-Ion Batteries by a Malonic Acid-Based Leaching System

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Leaching Behavior Analysis of Valuable Metals from Lithium-Ion Batteries Cathode Material

Recyclability study for the next generation of cobalt-free lithium-ion battery systems with C-LNMO, Si/C- LRLO and TiNbO-LNMO active materials via hydrometallurgical route

Life-cycle analysis of battery metal recycling with lithium recovery from a spent lithium-ion battery

Efficient separation and coprecipitation for simplified cathode recycling

A feasible process for recycling valuable metals from LiNi0.5Co0.2Mn0.3O2 cathode materials of spent Li-ion batteries

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device