Abstract:Drying is a very important unit operation in many industries such as food, pharmaceuticals, chemicals and ceramics. In most cases, wet materials are dried by forced convection using hot air flow. Heat and mass transfer processes during drying have been studied by both experimental and numerical simulation methods. For the purpose of studying the mechanism of heat and mass transfer and stress-strain distribution during the hot air drying of biological porous medium, two-way coupled thermo-hydro-mechanical mathematical model has been developed to simulate the hot air convective drying process of biological porous media on basis of Fickian diffusion theory, Fourier’s law of heat conduction and thermoelasticity mechanics. The following assumptions were made in order to find a solution to the hot air drying model: the biological porous medium was homogeneous and isotropic; the deformation during drying was elastic. The transient model, composed of a system of partial differential equations, was solved by finite difference methods. The computational procedure was programmed using C language. Some physical and mechanical properties of carrot changing with dry basis moisture content and temperature were considered. The numerical results were compared with available experimental data obtained during the drying of potatoes and carrots. The relative errors between numerical results and experimental data were both less than 5%, which showed the numerical results obtained using the mathematical model were in good agreement with the experimental data. Numerical simulations of the drying curve variations and the spatio-temporal distributions of moisture, temperature and drying stresses and strains of carrot were also evaluated. The temperature and moisture content showed a gradient inside carrot slice during drying. As the drying process proceeded, the temperature inside the carrot slice initially increased to reach the wet bulb temperature of the environment and eventually leveled off. The dry basis moisture content inside the carrot slice decreased, with the fastest decreased at the heat and mass transfer interface, eventually reached the equilibrium moisture content of the potato and leveling off. Both the moisture content gradient and the temperature gradient decreased gradually in the thickness direction. The normal stress was negative in all parts of the carrot slice, and the larger the closer to the evaporation interface. The shear stress was positive in all parts of the carrot slice, and the maximum shear stress occurred in the middle of the carrot slice. As in the case of the normal stress, the values of the normal strain were negative. The change trend of normal strain with time was consistent with that of moisture content. These results indicated that the observed physical deformations were caused by the dehydration of carrot slice during drying. The influence of drying conditions, such as air temperature, air velocity and the thickness of porous media on drying process was analyzed. Analysis showed that under certain drying conditions, the higher air temperature, the greater air velocity and the thinner slice thickness, the shorter drying time. This work should help in developing an understanding of the relationship between mass and heat transfer, shrinkage, stress, strains and physical degradation.

Convective drying of shrinking hydrogel with a constant temperature stage: Experimental and numerical investigations

Experimental and Theoretical Analysis of the Thermostatic Drying Process in Wetted Porous Sand Beds with Different Pore Sizes

Internal and surface temperature profiles of spherical biosolids particles during convective drying

Numerical and experimental investigation of convective drying in unsaturated porous media with bound water

Mathematical Model and Numerical Simulation of Biological Porous Medium During Hot Air Drying

Dynamic swelling performance of hydrophobic hydrogels

A fully coupled multiphase model for infrared-convective drying of sweet potato

Modeling Investigation of Hydrogel Volume Transition

Numerical modeling of drying from saturated to unsaturated conditions with two-phase partitioning boundaries at the medium surface and interface-dependent phase change

Effect of heat and mass transfer coefficients on force convective drying of porous media

Study of the Drying Behavior of Resorcinol Formaldehyde Hydrogels: Experimental Investigation and Numerical Framework

Understanding Three Hydration-Dependent Transitions of Zwitterionic Carboxybetaine Hydrogel by Molecular Dynamics Simulations

Heat and mass transfer scale-up issues during freeze drying: II. Control and characterization of the degree of supercooling

Non-uniformity Investigation in a Combined Thermal and Microwave Drying of Silica Gel

Non-linear Heat and Mass Transfer During Convective Drying of Kaolin Cylinder Under Non-steady Conditions

Novel insights into the biopolymers transformation under wastewater sludge drying process at different temperatures in relation to drying behavior

Vapour-liquid rebalancing behaviour of free water evaporation kinetics: experimental investigation and modelling

Experimental and Numerical Study of Flat Plate Sludge Drying at Low Temperature by Convection and Direct Conduction

Probe into the adaptability of local equilibrium/non-equilibrium assumptions in simulating freeze-drying of porous media

An implicit consideration of fluid flow in the calculation of drying shrinkage of porous materials: Case of saturated concrete in low humidity environment

Effect of Thermophysical Properties on Coupled Heat and Mass Transfer in Porous Material during Forced Convective Drying