Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Synthesis of a New Class of Extracted Pole Filters Without the Ideal Phase Shifters

Advanced Synthesis Technique for Unified Extracted Pole Filters

A Hybrid Method for Flat-Passband Filter with Nonuniform Q Resonators and Predistortion

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Advanced Synthesis and Precise Design of Inline Fully Canonical Filters With High Selectivity

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Exploiting Redundancy in Direct Synthesis for Inline Filters

A D-band Extracted Pole Waveguide Bandpass Filter Based on TE202 and TE301 Resonator

A Coupling Matrix and Admittance Function Synthesis for Mixed Topology Filters

Closed Form Fractional Integration and Differentiation via Real Exponentially Spaced Pole-Zero Pairs

An Inline Compact SIW Bandpass Filter with Quasi-Elliptic Response Using Microstrip Extracted-Pole Resonators

A design method for filter to achieve arbitrary distribution of multiple transmission zeros without cross-coupling

Direct Matrix Synthesis Approach for Narrowband Mixed Topology Filters

Miniaturized Two-Pole Lumped BPF with Four Controllable TZs Using Multiple Coupling Paths

Compact, Multilayer 5G Filter Based on Extracted-Pole Shielded Lumped Resonators

Synthesis Design of Ultra-Wideband Bandpass Filters With Designable Transmission Poles

Design and Synthesis of Reconfigurable Filtering Phase Shifter Using Optimization of Coupling Matrix

Design of Pseudoelliptic Filters with Controllable Transmission Zeros Using High‐ Q Double‐layer Suspended Stripline Resonators

WR-2.8 Band Pseudoelliptic Waveguide Filter Based on Singlet and Extracted Pole Resonator

Novel Compact Lowpass Filter Using Dual-Layer Coupled Resonators

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator