Abstract:The synthesis of inexpensive and efficient electrocatalysts with an excellent stability for the electrochemical oxygen reduction reaction (ORR) in both alkaline and acid media through a facile environment-friendly strategy is extremely desirable but remains challenging. In this study, a single-atom iron electrocatalyst with exclusively Fe–N4 moieties anchored on nitrogen-doped carbon nanorods (denoted as Fe–SA/NCS) is synthesized through a one-step pyrolysis of Fe-doped zeolitic imidazole framework-8 (ZIF8) nanorods that are synthesized in an aqueous system without acid leaching assistance. Profiting from the synergistic effect of the hierarchically porous carbon support with a rodlike structure and the large number of Fe–N4 moieties, the newly prepared Fe–SA/NCS exhibits excellent ORR catalysis activities with a half-wave potential of 0.91 V vs RHE in 0.1 M KOH as well as 0.77 V vs RHE in 0.1 M HClO4. Furthermore, better stability in alkaline or acid conditions was also observed for Fe–SA/NCS compared with Pt/C. The high open-circuit voltage of 1.53 V and high power density of 141.6 mW cm–2 of a zinc–air battery (ZAB) with Fe–SA/NCS as the cathode material indicate excellent electrochemical performances. The ZAB with the Fe–SA/NCS catalysts exhibits a remarkable cycling performance for more than 300 h with a high voltaic efficiency of 78.6%. The present work could pave the way for the rational construction of highly efficient and stable single-atom electrocatalysts through green synthesis for sustainable energy technologies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05509?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05509</a>.Figure S1: typical SEM images of 3D Fe-doped ZIF8 and the corresponding carbonization product 3D Fe–N–C catalyst, typical TEM images of 3D Fe-doped ZIF8 polyhedrons and corresponding carbonization product 3D Fe–N–C catalyst; Figure S2: typical SEM images of the as-synthesized Fe-doped ZIF8 precursors and corresponding carbonization product Fe–SA/NCS catalyst; Figure S3: XRD pattern of Fe–SA/NCS, high-resolution XPS spectra of Fe 2p and N 1s in Fe–SA/NCS, Raman spectra of Fe–SA/NCS; Figure S4: XPS full spectrum and corresponding atomic percentage (at. %) of C, N, O and Fe in the as-synthesized Fe–SA/NCS catalyst; Figure S5: XRD pattern of Fe–SA/NCS-10; Figure S6: Raman spectra of Fe–SA/NCS-10; Figure S7: N2 adsorption–desorption isotherm of Fe–SA/NCS, corresponding pore size distribution of Fe–SA/NCS, percentage of micropores, mesopores, and macropores, respectively; Figure S8: normalized Fe K-edge XANES spectra of the Fe–SA/NCS and Fe–SA/NCS-10 in reference to Fe foil, FeO, and Fe2O3, k3-weighted Fourier transform of the Fe K-edge EXAFS spectrum, wavelet transform (WT) of these samples, corresponding EXAFS fitting curve for Fe–SA/NCS-10; Table S1: Fe K-edge EXAFS curves fitting parameters for various samples; Table S2: comparison of ORR performance for Fe–SA/NCS with some reported catalysts in the alkaline and acid solution; Figure S9: LSV curves of Fe–SA/NCS in O2-saturated 0.1 M KOH at various rotation speeds, K–L plots of Fe–SA/NCS at various potentials, LSV curves of 3D Fe–N–C in O2-saturated 0.1 M KOH at various rotation speeds, K–L plots of 3D Fe–N–C at various potentials; Figure S10: ORR polarization curve of Fe–SA/NCS-10 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm, Stability evaluation by i–t chronoamperometric response of Fe–SA/NCS-10 in O2-saturated 0.1 M KOH solution at 0.67 V; Figure S11: ORR polarization curve and ring current of Fe–SA/NCS-3 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S12: ORR polarization curve and ring current of Fe–SA/NCS-1 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S13. ORR polarization curve and ring current of Fe–SA/NCS-800 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S14: ORR polarization curve and ring current of Fe–SA/NCS-1000 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; Figure S15: SCN– poison test for Fe–SA/NCS in 0.1 M HClO4 with the addition of 0.01 M KSCN, steady-state ORR polarization curves of Fe–SA/NCS recorded in O2-saturated 0.1 M HClO4 with or without poisoning by 0.01 M SCN–; Figure S16: ORR polarization curve of NCS-900 in O2-saturated 0.1 M KOH solution at a rotation rate of 1600 rpm; stability evaluation by i–t chronoamperometric response of NCS-900 in O2-saturated 0.1 M KOH solution at 0.67 V, ORR polarization curve of NCS-900 in O2-saturated 0.1 M HClO4 solution at rotation rate of -Abstract Truncated-

Mimicking Hydrazine Dehydrogenase for Efficient Electrocatalytic Oxidation of N 2 H 4 by Fe–NC

Hierarchically Nanostructured Nickel–Cobalt Alloy Supported on Nickel Foam as a Highly Efficient Electrocatalyst for Hydrazine Oxidation

Two Types of Single-Atom FeN 4 and FeN 5 Electrocatalytic Active Centers on N-Doped Carbon Driving High Performance of the SA-Fe-NC Oxygen Reduction Reaction Catalyst

An Open Gate for High-Density Metal Ions in N-Doped Carbon Networks: Powering Fe–N–C Catalyst Efficiency in the Oxygen Reduction Reaction

Hierarchically Nanostructured Ni2Fe2N As an Efficient Electrocatalyst for Hydrazine Oxidation Reaction

Atomic Fe Dispersed Hierarchical Mesoporous Fe–N–C Nanostructures for an Efficient Oxygen Reduction Reaction

Fe/N Co-Doped Hierarchically Porous Carbon on N-doped Carbon Nanotubes Towards Oxygen Reduction Reaction

Fe, N Co-Doped Carbonaceous Hollow Spheres with Self-Grown Carbon Nanotubes As a High Performance Binary Electrocatalyst

Supported Ni@Ni 2 P Core–Shell Nanotube Arrays on Ni Foam for Hydrazine Electrooxidation

Influence of different Fe doping strategies on modulating active sites and oxygen reduction reaction performance of Fe, N-doped carbonaceous catalysts

Bicontinuous nanoporous Ni-Fe alloy as a highly active catalyst for hydrazine electrooxidation

Molten NaCl‐Assisted Synthesis of Porous Fe‐N‐C Electrocatalysts with a High Density of Catalytically Accessible FeN 4 Active Sites and Outstanding Oxygen Reduction Reaction Performance

Nitrogen-doped porous carbon fiber with enriched Fe<sub>2</sub>N sites: Synthesis and application as efficient electrocatalyst for oxygen reduction reaction in microbial fuel cells

Multiscale porous Fe-N-C networks as highly efficient catalysts for the oxygen reduction reaction

Green Synthesis of a Highly Efficient and Stable Single-Atom Iron Catalyst Anchored on Nitrogen-Doped Carbon Nanorods for the Oxygen Reduction Reaction

Hydrazine Oxidation Reaction: Porous Carbon Membrane‐Supported Atomically Dispersed Pyrrole‐Type FeN 4 as Active Sites for Electrochemical Hydrazine Oxidation Reaction (Small 31/2020)

Nitrogen-doped porous carbon fiber with enriched Fe2N sites: Synthesis and application as efficient electrocatalyst for oxygen reduction reaction in microbial fuel cells

Grain boundaries derived from layered Fe/Co di-hydroxide porous prickly-like nanosheets as potential electrocatalyst for efficient electrooxidation of hydrazine

Superaerophobic CoP Nanowire Arrays as a Highly Effective Anode Electrocatalyst for Direct Hydrazine Fuel Cells

Ultra-fine Fe 3 C nanoparticles decorated in the Fe–N co-doped carbon networks with hierarchical nanoarchitectonics towards efficient oxygen reduction electrocatalysis

Hierarchically Porous M–N–C (M = Co and Fe) Single‐Atom Electrocatalysts with Robust MN x Active Moieties Enable Enhanced ORR Performance