Simultaneous syngas and CO 2 adsorbent production via rice straw gasification: An experimental study

Hong Nam Nguyen,Phuong Lan Tran-Nguyen,Duy Anh Khuong,Toshiki Tsubota
DOI: https://doi.org/10.1016/j.biombioe.2024.107137
IF: 5.774
2024-03-07
Biomass and Bioenergy
Abstract:Despite being a promising biomass source for gasification, the practical use of rice straw in Vietnam is hindered by its low gasification efficiency. This study introduces an innovative approach by integrating the production of syngas and CO 2 adsorbent during the gasification process of rice straw, departing from the conventional focus solely on improving gasification efficiency. Results showed that the gasification of rice straw, conducted in the 20 kWe commercial gasification system (PP20 All Power Lab), attained a thermal conversion efficiency of 58.7%. Syngas produced exhibited consistent composition, with CO and H 2 content ranging from 12.1% to 15%, CO ranging from 16.9% to 22.1%, and CH 4 ranging from 1.9% to 3.9% throughout the operation, demonstrating relative stability. Notably, a considerable amount of residual char, accounting for 22.1 wt% of the initial feedstock, was generated. Characterized by notable traits such as high surface basicity, aromaticity, and a dense concentration of (ultra-)micropores, the residual char demonstrates suitability for applications in CO 2 adsorption. In controlled laboratory conditions (25 °C, 1 atm, without heat-mass transfer limitations), the adsorption capacity reached 1.2 mmol g −1 . Transitioning to more practical conditions (40 °C, 1 atm, within a 2-cm adsorbent bed subject to diffusion constraints), the CO 2 adsorption capacity of the residual char ranged between 2% and 4.8% of the adsorbent's weight, while the CO 2 /N 2 selectivity measured between 25.5 and 29.7. These findings underscore the significant potential of integrating syngas and CO 2 adsorbent production through rice straw gasification, indicating a promising avenue for sustainable energy and carbon capture technologies.
energy & fuels,biotechnology & applied microbiology,agricultural engineering
What problem does this paper attempt to address?