Abstract:Abstract With the advent of the development of lower Tertiary formations in the deepwater Gulf of Mexico, a gap in proppant technology was identified at the beginning of the decade. No existing conventional proppant could provide the required conductivity at the anticipated 15,000 psi (and higher) prevailing closure stress. To meet these challenges a new proppant was developed, with the goal of achieving twice the baseline conductivity of any conventional proppant at 20,000 psi. Improvements in the manufacturing process lead to the required superior performance needed in extreme depth and stress environments. The shape of the new Ultra-High Stress Proppant (UHSP) is highly round and spherical with a mono-sized sieve distribution. At higher stresses, this means the UHSP will provide higher proppant pack porosity and ultimately more space to flow. In addition, the surface of the proppant is very smooth, leading to lower Beta, as well as reduced erosion potential. An extremely low internal pellet porosity evenly distributed in fine pores results in much stronger grains, with crush value of less than 2% at 20,000 psi for 20/40 mesh equivalent product. Additionally, the new proppant technology provides further advantages with increased durability and longevity, as well as significantly reduced erosion on downhole tools and equipment. Further to the ultra-high stress applications the new manufacturing technique was applied to ores typically used to manufacture low density ceramics. The result is a proppant with equal or better conductivity than standard intermediate and high density ceramics leading to larger frac volume and better carrying capacity. This new low density ceramic can effectively replace the use of conventional ceramics from low to medium and high stress applications and in many cases reduce the costs associated with pumping these higher density proppants. This paper will briefly review the manufacturing process and resulting step change advancements achieved by this new proppant, stressing on the technology adoption in the Gulf of Mexico illustrated with multiple case histories. This paper should be beneficial to all engineers and technologists currently working in fracturing applications from low to ultra-high stress, or other harsh conditions such as steam-flooding and geothermal applications.

Hydrophobic epoxy resin coated proppants with ultra-high self-suspension ability and enhanced liquid conductivity

Shaly detritus embedded epoxy-resin coated proppants

Graphene and Resin Coated Proppant with Electrically Conductive Properties for In-Situ Modification of Shale Oil

A Study on a New Type of High-Performance Resin-Coated Sand for Petroleum Fracturing Proppants

Coated proppants with self-suspension and tracer slow-release functions

Preparation and Characterization of Polymeric Ultra-Low-Density Proppants: Epoxy/Phenolic Resin-Coated Polystyrene/Graphite Microspheres

Development of the epoxy resin phase change proppant based on the Pickering emulsification technology

Novel hydraulic fracturing fluids with improved proppant carrying capacity and pH-adjustable proppant deposition behavior

Preparation and Properties of Lightweight Amphiphobic Proppant for Hydraulic Fracturing

A New Coated Proppant for Packing Fractures in Oil Reservoirs

EXPERIMENTAL RESEARCH ON CONDUCTIVITY OF DIFFERENT TYPES OF PROPPANTS

Novel Highly Dispersible, Thermally Stable Core/shell Proppants for Geothermal Applications

Ultra-light Weight Proppant of Diatomite-Reinforced Poly(methyl Methacrylate-Co-styrene) Enabling High Compressive Strength, Heat and Acid Resistance Toward Hydraulic Fracturing

Preparation and characterization of high-performance ceramic proppant from recycling utilization of oil-based drilling cuttings pyrolysis residues

Insight into thermo-mechanical enhancement of polymer nanocomposites coated microsand proppants for hydraulic fracturing

A new proppant type fully coupled fiber-proppant and its property evaluation for unconventional reservoirs

Preparation of low density, high-strength, strong hydrophobic particles (LHSPs) and its application as oil fracturing proppant

Facile and Controllable Preparation of Poly(St-co-MMA)/FA Microspheres Used as Ultra-Lightweight Proppants

Constructing low-cost and high-strength ultra-low-density proppants based on the modification of activated carbon framework with in-situ hydrolyzed silane

Chemical Proppant Generated in the Fracture from the Novel Fracturing Fluid System

Ultra-High-Strength Proppant: An Update on Deepwater Applications in the Gulf of Mexico