Abstract:The design of electrocatalysts capable of selectively reducing nitrate to ammonia is gaining interest as a means of transforming waste into fertilizers. However, most prior investigations of prototypical electrocatalysts, such as polycrystalline Pd and Pt, have focused on unraveling the mechanisms responsible for the selective reduction of nitrate to nitrogen gas. Such polycrystalline noble metals demonstrate notoriously low activity for nitrate reduction (nitrate to nitrite) and high activity for nitrite reduction (nitrite to nitrogen). Here, we aim to elucidate the effect Pd surface structure has on nitrate and nitrite reduction and to determine what role catalyst structural design can play in enabling selective reduction of nitrate to ammonia. Through synthesizing nanocatalysts with controlled facets (e.g., nanocubes, cuboctahedrons, octahedrons, and concave nanocubes), we demonstrate that Pd(111) > Pd(100) > Pd(hk0) for nitrate reduction activity and Pd(100) > Pd(hk0) > Pd(111) for nitrite reduction activity in an alkaline electrolyte. Octahedrons without Pd (100) facets exhibited nearly selective production of NO2– with little to no measurable NH3 or N2. However, nanocubes that expose only the Pd(100) facet exhibited high activity for NO2– reduction to NH3. Cuboctahedrons that expose both Pd(111) and Pd(100) facets demonstrated the highest production of ammonia (306.8 μg h–1 mgPd–1) with a faradaic efficiency of 35%. Density functional theory (DFT) simulations reveal that *NO3 dissociation to *NO2 + O* is more favorable on Pd(111) than Pd(100), explaining the faster nitrate reduction kinetics on the Pd(111) facet observed in the experiments. The simulations also show that *NO2 binds less strongly to Pd(111) compared to Pd(100). Thus, nitrite formed via nitrate dissociation readily desorbs from the Pd(111) surface, which explains why Pd(111) selectively reduces nitrate to nitrite. The results show that cuboctahedron is bifunctional in nature, with the (111) facet catalyzing the conversion of NO3– to NO2– and the (100) facet catalyzing the conversion of NO2– to NH3.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.1c01413?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.1c01413</a>.TEM images at low magnification of all shape-controlled Pd catalysts; TEM images for Pd deposition on carbon support; ECSA calculation methods and summarizes; UV–vis measurements; The absorbance–concentration calibration curves of NO3–-N, NO2–-N, and NH3-N; in situ mass spectrometer results; TEM results for stability after testing; nitrate and nitrite reduction activity of Vulcan carbon XC72R; additional H-cell test with carbon paper electrode and OCV tests of all Pd catalysts for verifying contaminations; Total nitrogen balance before and after electrolysis; size effects on NH3 yield of Pd with larger sizes by annealing; and additional computational details and results (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.1c01413/suppl_file/cs1c01413_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Palladium Metallene for Nitric Oxide Electroreduction to Ammonia

PdP 2 Nanoparticles on Reduced Graphene Oxide: A Catalyst for the Electrocatalytic Reduction of Nitrate to Ammonia

Alloying effect-induced electron polarization drives nitrate reduction to ammonia

Alloying Effect-Induced Electron Polarization Drives Nitrate Electroreduction to Ammonia

Periodic Adjacent Pd‐Fe Pair Sites for Enhanced Nitrate Electroreduction to Ammonia via Accelerating Proton Relay

Alloying Pd with Ru enables electroreduction of nitrate to ammonia with ∼100% faradaic efficiency over a wide potential window

Optimizing Intermediate Adsorption over PdM (M = Fe, Co, Ni, Cu) Bimetallene for Boosted Nitrate Electroreduction to Ammonia

Electroreduction of Nitrate to Ammonia on Palladium–Cobalt–Oxygen Nanowire Arrays

Ambient ammonia synthesis via palladium-catalyzed electrohydrogenation of dinitrogen at low overpotential

Modulating Single‐Atom Palladium Sites with Copper for Enhanced Ambient Ammonia Electrosynthesis

Enhanced Metal–Support Interfacial Interaction of Pd@FeNi-CoO Composites for Efficient Nitrate Reduction to Ammonia

Selectively Reducing Nitrate into NH 3 in Neutral Media by PdCu Single-Atom Alloy Electrocatalysis

Ambient Ammonia Electrosynthesis from Nitrogen and Water by Incorporating Palladium in Bimetallic Gold–Silver Nanocages

Surface-enhanced bimetallic effect of Au-Pd by internal electromagnetic fields from Au@Cu2O for efficient electrochemical nitrate reduction to ammonia

Facet-controlled palladium nanocrystalline for enhanced nitrate reduction towards ammonia

Mesoporous PdN Alloy Nanocubes for Efficient Electrochemical Nitrate Reduction to Ammonia

Palladium-based nanocatalysts for NH<sub>3</sub> synthesis through nitrate electroreduction: nanocomposites, alloys, and atomically precise nanoclusters

Structure Sensitivity of Pd Facets for Enhanced Electrochemical Nitrate Reduction to Ammonia

Polyoxometalate-Intercalated Tremella-Like CoNi-LDH Nanocomposites for Electrocatalytic Nitrite-Ammonia Conversion

Boosting the Electroactivity of Porous Ni 2 P/Pd 6 P Nanorods for Nitrate to Ammonia Through Hydrogen Spillover Effect