Abstract:All-conjugated rod-rod block copolymers (BCPs) have gained immense interest over the past few years because they combine fascinating self-assembly properties of BCPs with the optical and electronic properties of conjugated polymers. Based on it, an all-conjugated rod-rod BCPs, poly(3-hexylselenophene)-b-poly[3-(6-hydroxyl) hexylthiophene] (P3HS-b-P3HHT) with hydroxyl groups as side substitution groups was synthesized via the Grignard metathesis (GRIM) method. The introduction of side hydroxyl groups was designed to endow different polarity between P3HS and P3HHT blocks and enrich the solution structures of P3HS-b-P3HHT. During thermal annealing, the cross-linking of hydroxyl groups was also utilized to improve the thermal stability of poly(3-hexylthiophene) (P3HT)-based organic field-effect transistors (OFETs) when blended with a certain amount of P3HS-b-P3HHT. On one hand, the use of mixed solvents provided an effective way to control the self-assembly behavior of P3HS-b-P3HHT. Depending on the mixed solvent ratio (i.e., chloroform/pyridine or methanol/pyridine), the rod-rod interaction of the copolymer chains was controlled, yielding a series of nanostructures such as nanoribbons, nanofibers, and nanospheres. Detailed morphologies and the corresponding photophysical behavior of different nanostructures were characterized by transmission electron microscope and UV-vis absorption spectra. The conformations of the P3HS and P3HHT chains in the solutions influenced their photophysical properties greatly. On the other hand, based on the thermal cross-linkable properties of hydroxyl groups, a certain amount of P3HS-b-P3HHT was mixed with P3HT homopolymer to fabricate P3HS-b-P3HHT/P3HT OFETs. For control samples, the charge carrier mobility of pure P3HT-based OFETs was improved with the increased annealed temperatures up to 170 degrees C, then decreased significantly when the temperature further increased to 200 degrees C. While overall, the charge carrier mobilities of P3HS-b-P3HHT/P3HT OFETs were lower than those of pure P3HT-based OFETs, they were improved with the increased temperature to 200 degrees C. It was found the P3HS-b-P3HHT(10%)/P3HT OFETs exhibited the charge carrier mobility of 0.040 cm(2).V-1.s(-1) after annealing at 200 degrees C for 1 h, which was higher than P3HT OFETs (0.025 cm(2).V-1.s(-1)) under the same experimental condition. It was due to the cross-linking of hydroxyl groups in P3HS-b-P3HHT retain the crystallization structures of P3HT, thus improved the thermal stability of OFETs. Overall, this work demonstrates a new polythiophene-polyselenophene BCP with controlled nanostructures by solvent blending and promising application in OFETs to improve their thermal stability.

Robust organic semiconductor thermoset composite films based on Crystallization-Driven Self-Assembled nanofibers of Poly(3-hexylthiophene) block copolymers

Nanostructured thermosets containing π-conjugated polymer nanophases: Morphology, dielectric and thermal conductive properties

A Novel Hydrophilic Pyridinium Salt Polymer/swcnts Composite Film for High Thermoelectric Performance

Enhanced Electrical Conductivity of Highly Crystalline Polythiophene/Insulating-Polymer Composite

Crystallization-driven self-assembly of poly(3-hexylthiophene)- b -poly( 2,5-bis(2-ethylhexyloxy) p -phenylene), a π-conjugated diblock copolymer with a rigid rod corona-forming block

Photothermal-thermoelectric Composite Film with Excellent Self-Healing and Low Temperature Resistance Properties for Electromagnetic Wave Shielding and Absorption

Multifunctional superhydrophobic composite films from a synergistic self-organization process

Flexible Multilayered Films Consisting Of Alternating Nanofibrillated Cellulose/Fe3o4 And Carbon Nanotube/Polyethylene Oxide Layers For Electromagnetic Interference Shielding

Flexible Sandwich‐Structured Electromagnetic Interference Shielding Nanocomposite Films with Excellent Thermal Conductivities

Magnetic Field-Induced Strategy for Synergistic CI/Ti3C2Tx/PVDF Multilayer Structured Composite Films with Excellent Electromagnetic Interference Shielding Performance

Enhanced thermoelectric performance of poly(3-substituted thiophene)/single-walled carbon nanotube composites via polar side chain modification

Crystallization Control of N,N′-Dioctyl Perylene Diimide by Amphiphilic Block Copolymers Containing Poly(3-Hexylthiophene) and Polyethylene Glycol

All-Conjugated Block Copolymers And Conjugated Polymer/Nanocrystal Nanocomposites: From Synthesis, Self-Assembly To Energy Application

Multifunctional Syndiotacticity-Rich Poly (vinyl Alcohol)/mxene Sediment for Multilayered Composite Films with Effective Electromagnetic Interference Shielding and Thermal Conductivity

Effects of Fullerene Solubility on the Crystallization of Poly(3-Hexylthiophene) and Performance of Photovoltaic Devices

Anisotropic PDMS/Alumina/Carbon Fiber Composites with a High Thermal Conductivity and an Electromagnetic Interference Shielding Performance

Synthesis and Properties of an All-Conjugated Polythio-phene-Polyselenophene Diblock Copolymer

An Asymmetric Layer Structure Enables Robust Multifunctional Wearable Bacterial Cellulose Composite Film with Excellent Electrothermal/Photothermal and EMI Shielding Performance

A novel strategy to prepare high performance multifunctional composite films by combining electrostatic assembly, crosslinking, topology enhancement and sintering

Multifunctional wood-derived cellulose/Ti 3 C 2 T x composite films enhanced by densification strategy for electromagnetic shielding, Joule/solar heating, and thermal camouflage

Controlled Distributed Ti3 C2 Tx Hollow Microspheres on Thermally Conductive Polyimide Composite Films for Excellent Electromagnetic Interference Shielding.