Abstract:The SO2/NOX pollution in the flue gas of non-ferrous smelting is increasingly serious. At the same time, the accumulation of red mud (RM) in the aluminum industry and phosphorus sludge (PS) in the yellow phosphorus industry has caused serious harm to the environment. To remove SO2 and NOX from the non-ferrous smelting flue gas and realize the resource utilization of the above two solid wastes, an ultrasonic field was used in this study to strengthen the PS excited O3 process and RM wet desulfurization and denitrification process. In the process of O3 excitation, the response surface method (RSM) is used to obtain the optimal O3 excitation concentration, and the optimal reaction conditions are designed based on the response surface optimization model: T is 53.226 °C, power density is 0.4 W/cm2, PS concentration is 51.433 g/L, O3 formation concentration up to 250 ppm or more, which provides a theoretical basis for subsequent desulfurization and denitrification steps. It is proved that this study can replace the expensive traditional O3 generator and provide a basis for NOX removal in the following process. In addition, the optimum experimental conditions of ultrasonic enhanced RM desulfurization and denitrification process were also explored. Under ultrasonic frequency of 28 kHz, ultrasonic power density of 0.4 W/cm2, T of 50 °C, RM concentration of 15 g/L, and stirring intensity of 1000 rpm, the desulfurization efficiency of the reaction system can be maintained above 95 % within 250 min, and the denitrification efficiency can be maintained above 90 % within 250 min. The effect of desulfurization and denitrification in this study is much better than that of traditional methods. Finally, the reaction mechanism of ultrasonic enhanced O3 excitation and RM wet desulfurization and nitrogen removal was discussed by combining adsorption thermodynamics, isotherm, and kinetics. The results showed that the OH· free radicals generated by ultrasonic cavitation and the physical effects brought by emulsification had significant promoting effects.

Reducing CO/NO and absorbing heavy metals in self-sustained smouldering of high-moisture sludge by regulating inert media with low-cost natural zeolite

Volumetric scaling up self-sustained smouldering of printing and dyeing sludge with high moisture content

Self-sustained smouldering treatment technology for high-moisture sludge: Pilot-scaled tests with continuous operation

Experimental investigation on self-sustained smouldering of food-processing sludge with extremely high moisture content: From laboratory-scale to pilot-scale volumetric scale-up

Ultrasonic-enhanced Phosphorus Sludge Excited O3 Coupled Red Mud Simultaneous Desulfurization and Denitrification

Disposal of Low Concentration Fume with Solid Waste Modified by Microwave.

Insight into the Effects of Inorganic Element Catalysis and Basic Fuel Properties on the Self-Sustained Smoldering Process of Sewage Sludge

Reduction of heavy metal emissions by adding modified attapulgite to sludge in bubbling fluidized bed incineration process

Method of smoldering combustion for the treatment of oil sludge-contaminated soil

Smouldering combustion of sewage sludge: Volumetric scale-up, product characterization, and economic analysis

Waste utilization of sewage sludge and red mud based on chemical looping catalytic oxidation

Gas Emission Characteristics of Sewage Sludge Co-Combustion with Coal: Effect of Oxygen Atmosphere and Feedstock Mixing Ratio

Effect of furnace temperature and oxygen concentration on combustion and CO/NO emission characteristics of sewage sludge

Optimal metal immobilization of oxygen-enriched co-combustion of Zn/Cd hyperaccumulator and textile dyeing sludge with natural or modified kaolin

Optimization of municipal solid waste incineration for low-NOx emissions through numerical simulation

Removal of SO2 and NOx from flue gas using mud-phosphorus slurry

Enhanced NOx absorption in flue gas by wet oxidation of red mud and phosphorus sludge

High-Temperature Ash Melting and Fluidity Behavior upon the Cocombustion of Sewage Sludge and Coal

Co-combustion of Shenmu Coal and Pickling Sludge in a Pilot Scale Drop-Tube Furnace: Pollutants Emissions in Flue Gas and Fly Ash

Experimental study and modeling analysis of sewage sludge smoldering combustion at different airflow rates

Effect of CaO and montmorillonite additive on heavy metals behavior and environmental risk during sludge combustion