Anticorrosion Method Combining Impressed Current Cathodic Protection and Coatings in Marine Atmospheric Environment

Peichang Deng,Juyu Shangguan,Jiezhen Hu,Huan Huang,Lingbo Zhou

DOI: https://doi.org/10.3390/coatings14050524

IF: 3.236

2024-04-25

Coatings

Abstract:In this study, a new anticorrosion method combining impressed current cathodic protection (ICCP) with coatings that can be applied to marine atmospheric environments is proposed. As the corrosion medium fills the cracks and pores of the coating, an electrolyte film layer is inevitably formed on the metal surface. Therefore, a graphene conductive coating with excellent chemical inertness and shielding performance is selected as the intermediate coating to form an electrolytic cell system with a metal substrate serving as the cathode and a graphene coating serving as the auxiliary anode. By studying the surface corrosion morphologies and electrochemical signals of the coating samples at different protection potentials and coating thicknesses, the optimal potential is determined to be 0.6 V, and the optimal coating thickness is determined to be 20 μm. The samples protected by the joint method have lower corrosion rates and better anticorrosion performance than those protected by the coatings alone.

materials science, multidisciplinary,physics, applied, coatings & films

What problem does this paper attempt to address?

The paper mainly addresses the issue of corrosion protection for metal structures in marine atmospheric environments. Specifically, the study proposes a new anti-corrosion method that combines Impressed Current Cathodic Protection (ICCP) with coating technology. This method is primarily aimed at overcoming the limitations of single protection technologies (such as using only coatings or traditional ICCP) in marine atmospheric environments.

Key points mentioned in the paper include:
- **Principle of the anti-corrosion method**: By applying a layer of graphene conductive coating with excellent chemical inertness and shielding performance on the metal substrate, and using the metal substrate as the cathode and the graphene coating as the auxiliary anode, an electrolytic cell system is formed.
- **Determining the optimal protection voltage**: The study examined the changes in corrosion morphology and electrochemical signals on the sample surface under different protection voltages (0.6 V was determined to be the optimal value) to find the most effective anti-corrosion effect.
- **Determining the optimal coating thickness**: By analyzing the open circuit potential and polarization behavior of samples with different coating thicknesses (20 μm was ultimately determined to be the optimal thickness), the anti-corrosion performance was evaluated.

In summary, this study aims to develop an efficient anti-corrosion method suitable for marine atmospheric environments, which can effectively improve the corrosion resistance of metal structures and extend their service life.