Toward Stable Monolithic Perovskite/Silicon Tandem Photovoltaics: A Six-Month Outdoor Performance Study in a Hot and Humid Climate
Michele De Bastiani,Emmanuel Van Kerschaver,Quentin Jeangros,Atteq Ur Rehman,Erkan Aydin,Furkan H. Isikgor,Alessandro J. Mirabelli,Maxime Babics,Jiang Liu,Shynggys Zhumagali,Esma Ugur,George T. Harrison,Thomas G. Allen,Bin Chen,Yi Hou,Semen Shikin,Edward H. Sargent,Christophe Ballif,Michael Salvador,Stefaan De Wolf
DOI: https://doi.org/10.1021/acsenergylett.1c01018
IF: 22
2021-07-30
ACS Energy Letters
Abstract:Perovskite/silicon tandem solar cells are emerging as a high-efficiency and prospectively cost-effective solar technology with great promise for deployment at the utility scale. However, despite the remarkable performance progress reported lately, assuring sufficient device stability—particularly of the perovskite top cell—remains a challenge on the path to practical impact. In this work, we analyze the outdoor performance of encapsulated bifacial perovskite/silicon tandems, by carrying out field-testing in Saudi Arabia. Over a six month experiment, we find that the open circuit voltage retains its initial value, whereas the fill factor degrades, which is found to have two causes. A first degradation mechanism is linked with ion migration in the perovskite and is largely reversible overnight, though it does induce hysteretic behavior over time. A second, irreversible, mechanism is caused by corrosion of the silver metal top contact with the formation of silver iodide. These findings provide directions for the design of new and more stable perovskite/silicon tandemsThe Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsenergylett.1c01018.Experimental section; J(V) curves of the bifacial tandems measured before and after encapsulation under standard condition and in the first day in the test-field; environmental humidity; Voc and Jsc variation after six-months, temperature monitoring of a tandem device, ambient temperature, and current trend; FF variation on single junction perovskite solar cells in the test-field; analysis of the J(V) curves of sample A recorded during the outdoor experiment; test-field performances of the tandems and the silicon heterojunction reference over six months; laboratory setup for lab experiments; temperature for a device in the outdoor; comparison between J(V) curves at different light intensities; hysteresis before and after the test-field experiment; scanning electron microscopy images of aged, fresh perovskite, and silver electrode; lamella for the TED-EDX analysis; X-ray photoelectron spectroscopy analysis of the silver electrode; atomic force microscopy of C60 on the perovskite film on a pristine and aged samples; and subcell performances of sample A (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry