Abstract:BackgroundAn induction motor is at the heart of every rotating machine and hence it is a very vital component. Almost in every industry, around 90% of the machines apply an induction motor as a prime mover. It is a very important driving unit of the machine. Hence, it is necessary to monitor its condition to avoid any catastrophic failure and stoppage of production. The breakdown of the induction motor would not be affordable due to remarkable financial loss, unpredicted shutdown, and the associated repair cost.PurposeVibration is a manifestation of induction motor due to the issues in alignment, balancing, and clearances. Bearing, the most vulnerable to failure due to continuous working under fatigue loading leads to defects. These defects cause changes in the vibration signature over time. The vibration monitoring techniques helps to effectively diagnose mechanical faults such as bearing defect and stator rotor rub. The purpose of this review paper is to summarize the major faults in induction motor, recent diagnostics methods augmented with advanced signal processing techniques, and real-life applications in electric vehicles. It also discusses possible research gaps and opportunities to contribute based on the review findings in the field of condition monitoring.MethodsThis article presents a detailed review of recent trends in the research of condition monitoring and fault diagnosis of the induction motor. The emphasis is given on the major faults in the induction motor covering time-domain, frequency-domain, and time–frequency domain methods along with an application of artificial intelligence techniques for fault detection.Review FactorThis article presents a comprehensive review of literature which highlights the development and new propositions by researchers in the field of diagnostic techniques for the different faults of induction motor in the last decade. Researchers documented applications of the different conventional methods, advanced signal processing techniques, and soft computing techniques for fault identification of induction motor. This review is carried out for fault identification of induction motor used in machines in general and in particular for identifying the faults in an induction motor of an electric vehicle. A dedicated discussion on the review findings, research gaps, future trends in the field of condition monitoring of induction motor is presented. Condition monitoring of the induction motor in an electric vehicle is also discussed in this paper.ConclusionsIt is observed that the vibration-based techniques are reported to be effective for the identification of mechanical faults while motor current signature analysis is effective for electrical fault in an induction motor. The review presented to analyze the suitability of various condition monitoring techniques for the induction motor fault identification in general and particularly its application in an electric vehicle. It is observed that the diagnosis of faults at the incipient level without using the signal processing technique is challenging. Fault diagnosis of induction motor has witnessed the changes from traditional diagnosis techniques to advanced techniques with a hybrid application of signal processing and artificial intelligence techniques. Still, there is a potential of improvement in reliability, efficiency, robustness, computational time, and real-time diagnostics of faults in IM.

Effective Electrical Fault Diagnosis Using Gabor Transform of Motor Input Current After Spectral Subtraction

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Stator Inter-Turn Fault Diagnosis by Motor Current Signature Approach

Sensitive Inter-turn Fault Detection Approach for Induction Motor Under Various Operating Conditions

Detection of Stator Winding Faults in PMSMs Based on Second Harmonics of Phase Instantaneous Reactive Powers

Inter-turn Fault Detection for the Inverter-Fed Induction Motor Based on the Teager-Kaiser Energy Operation of Switching Voltage Harmonics

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

Fault Diagnosis on Induction Motor using Machine Learning and Signal Processing

Characteristics Analysis and Measurement of Inverter-Fed Induction Motors for Stator and Rotor Fault Detection

Condition Monitoring and Fault Diagnosis of Induction Motor

An Efficient Hilbert–Huang Transform-Based Bearing Faults Detection in Induction Machines

Multiple Fault Detection in Induction Motors through Homogeneity and Kurtosis Computation

Fault Detection in Induction Motor Using Time Domain and Spectral Imaging-Based Transfer Learning Approach on Vibration Data

Artificial Neural Network Application for Current Sensors Fault Detection in the Vector Controlled Induction Motor Drive

Feature Extraction for Short-Circuit Fault Detection in Permanent-Magnet Synchronous Motors Using Stator-Current Monitoring

Motor Bearing Fault Diagnosis Based on Fourier-based Synchrosqueezing Transform and Hilbert Envelope Spectrum

Fault Diagnosis of Inter-turn Short Circuit in Permanent Magnet Synchronous Motors with Current Signal Imaging and Unsupervised Learning

Diagnostic of Combined Mechanical and Electrical Faults in ASD-Powered Induction Motor Using MODWT and a Lightweight 1-D CNN

Condition Monitoring and Feature Extraction of Stator Current Phasors for Enhanced Fault Diagnosis in AC Drive

An Online Data-Driven Method for Simultaneous Diagnosis of IGBT and Current Sensor Fault of Three-Phase PWM Inverter in Induction Motor Drives

Mean Current Vector Based Online Real-Time Fault Diagnosis for Voltage Source Inverter Fed Induction Motor Drives