Abstract:In our days, the fight against pollution has become a real challenge for the state. recycling is one of the solutions that is adopted in several nations to reduce the rate of plastic discarded in nature. The amount of plastic waste has been increasing for decades contributing to the environmental pollution that is one of the most serious problem of the mankind. according to the statistics not only the household plastic waste, but the industry discharge is increasing because the utilization of plastic as a raw material is more and more extending. plastic can be found in a lot of products, huge number of bottles, plastic bags, computers, auto parts are sold every day. The current applications for using recycled plastics in fabrication and design are fairly limited, on a small scale, plastics (such as abs, HDPe1, or Pe2t) are shredded and formed into pellets, and then either extruded into lament to be used in existing 3d printers, or injection molded into small parts and pieces of larger components. at a large scale, recycled HDpE is melted into sheets and either used directly as sheets in construction, or then heat formed from a sheet into components for construction. these methods of fabrication using recycled plastics are the norm because of their straightforward processes. nevertheless, each method leaves some complexity to be desired. This paper we study the types of plastics and diagnose the pollution caused by the latter. this allowed us to design and size a recycling station of plastic into filaments for three-dimensional printers. this station which will contribute to the fight against pollution. the station consists of two machines for grinding of the plastic and the other for the extrusion of the desired filaments. we were able to make a theoretical academic study on both machines and also we designed with solidworks 2015. The theoretical study is spread of the mechanical calculations necessary to the design and validation of the structure using the tools. as the prospect of this project, we want to complete the achievement of this station while completing the crusher and extruder mechanically. then switch to electric and electronic parts (introduction of engines, sensors and wiring...). In the case of waste plastics that are recyclable and reusable. the most widely used are polyethylene terephthalate (pet, used for synthetic fibers and water bottles), and second high-density polyethylene (hdpe, used for jugs, bottle caps, water pipes).

Production of 3D printing filament from plastic bottles waste using a low-income settings extruder as an opportunity to reduce plastic pollution in small Island developing states

Development and characterization of sustainable 3D printing filaments using post-consumer recycled PET: processing and characterization

Recycling of Bottle Grade PET: Influence of HDPE Contamination on The Microstructure and Mechanical Performance of 3D Printed Parts

Material Characterizations of the Polymers Reinforced with Recycled Flexible Plastic Blends as Filament for 3D Printing

Optimization of Glass-Powder-Reinforced Recycled High-Density Polyethylene (rHDPE) Filament for Additive Manufacturing: Transforming Bottle Caps into Sound-Absorbing Material

Scalable Engineering of 3D Printing Filaments Derived from Recycling of Plastic Drinking Water Bottle and Glass Waste

Sustainable polymer reclamation: recycling poly(ethylene terephthalate) glycol (PETG) for 3D printing applications

Short basalt fibre reinforced recycled polypropylene filaments for 3D printing

Characterization of 3D printable Polyethylene Terephthalate Glycol composite filament reinforced with agricultural waste derived from pineapple plant

Influence of plastic recycling—a feasibility study for additive manufacturing using glycol modified polyethylene terephthalate (PETG)

Development of a small-scale plastic recycling technology and a special filament product for 3D printing

Recycled polypropylene blends as novel 3D printing materials

Plastic Waste Valorization for Fused Deposition Modeling Feedstock: A Case Study on Recycled Polyethylene Terephthalate/High-Density Polyethylene Sustainability

Extrusion and characterization of recycled polyethylene terephthalate (rPET) filaments compounded with chain extender and impact modifiers for material-extrusion additive manufacturing

Manufacturing of a PET Filament from Recycled Material for Material Extrusion (MEX)

Feasibility Study on the Fused Filaments of Injection-Molding-Grade Poly(Ethylene Terephthalate) for 3D Printing

Processing System for Plastic Bottle to Obtain Polyethylene Terephthalate Filament in 3D Printers

Sustainable approach to the revalorization of crab shell waste in polymeric filament extrusion for 3D printing applications

Development of poly (butylene adipate-co-terephthalate) PBAT toughened poly (lactic acid) blends 3D printing filament

Production of smart polymer blend filament from waste PET obtained water bottles: investigation of thermal and shape memory behavior

Transforming electronic waste into a sustainable 3D printing filaments using polylactic acid