Abstract:Cr(VI) stands as a profoundly toxic chemical and photocatalysis technology has shown promising potential in photocatalytic reduction of Cr(VI) to Cr(III), where the reduced Cr(III) is less toxic and can be further precipitated in a wide pH range. Metal-organic frameworks (MOFs), as emerging class of porous coordination polymers, is expected to be ideal platform for photocatalysis. In this study, defect engineering on MOFs was applied to promote photoreduction of Cr(VI). The obtained oxygen vacancy-containing MIL-125-NH 2 samples showed modified electron structure, adjusted surface and porous properties, and enriched active sites. Among these oxygen vacancy-containing MIL-125-NH 2 samples, the 300-M (MIL-125-NH 2 heated at 300 °C for 2 h under N 2 atmosphere) displayed the most remarkable performance in terms of photocatalytic Cr(VI) reduction. The pronounced efficacy of 300-M is evident from the achieved removal rate of Cr (VI), reaching an impressive 98 % in just 20 mins (19.6 mg Cr(VI) g −1 cata min −1 ), in stark contrast to MIL-125-NH 2 , which exhibited a modest removal rate of 53 %. Remarkably, the k-value for 300-M is 5.1 times that of MIL-125-NH 2 , further underscoring the superior efficiency of 300-M. The photoreduction mechanism of 300-M was further substantiated through a battery of advanced characterization techniques including transient photocurrent, electrochemical impedance spectroscopy, fluorescence spectroscopy, the Mott-Schottky analysis, and electron spin resonance. Those results disclosed that oxygen vacancies and mesopores introduced via controlled heat treatment play a pivotal role in facilitating the photoreduction of Cr(VI) within the MIL-125-NH 2 structure. More advanced characterizations for the structures of photocatalysts and the photocatalytic mechanisms including charge transfer path need further studied. The systematic exploration of temperature-dependent effects on material properties opens avenues for future research in designing efficient and versatile MOF-based photocatalysts for environmental remediation applications.

Hydrothermally synthesized Mo/Zr-MOF photocatalyst for promoting the removal of Cr 6+ under visible light

Enhanced Visible-Light-driven Photocatalytic Removal of Refractory Pollutants by Zn/Fe Mixed Metal Oxide Derived from Layered Double Hydroxide

Assembly of Eosin Y In-Situ Intercalated Zr-MOF Composite for Decontaminating Cr(VI) and Reactive Dyes Via Physical Capture and Photochemical Purification

Ag(I)-grafted UiO-67 to enhance the photochemical efficiency under visible light for highly efficient photocatalytic reduction of Cr(VI) and degradation of Reactive Blue 13

Tuning band structures at metal sulfides/Zr-MOF heterojunctions: modulate optical-electronic properties to boost photocatalytic detoxification of Cr(VI) and degradation of reactive dyes

In-situ Fabrication of MoO3 Nanobelts Decorated with MoO2 Nanoparticles and Their Enhanced Photocatalytic Performance

Enhanced photoreduction efficiency of Cr(vi) driven by visible light in a new Zr-based metal–organic framework modified by hydroxyl groups

Construction of the Copper Metal-Organic Framework (Mof)-on-indium MOF Z-scheme Heterojunction for Efficiently Photocatalytic Reduction of Cr(VI)

Zirconium-Doped Chromium IV Oxide Nanocomposites: Synthesis, Characterization, and Photocatalysis towards the Degradation of Organic Dyes

Controllable Synthesis Of The Defect-Enriched Moo3-X Nanosheets As An Effective Visible-Light Photocatalyst For The Degradation Of Organic Dyes

Microwave-assisted synthesis of Zr-based metal-organic polyhedron: Serving as efficient visible-light photocatalyst for Cr(VI) reduction

Fabrication of High Photocatalytic Activity and Easy Recovery Photocatalysts with ZnFe2O4 Supported on Ultrathin MoS2 Nanosheets

ZrO2/MoS2 heterojunction photocatalysts for efficient photocatalytic degradation of methyl orange

Construction of UiO-66-NH2 decorated by MoS2 QDs as photocatalyst for rapid and effective visible-light driven Cr(VI) reduction

Synergistic interaction of three-dimensional ZnCdS@MoS 2 heterostructures for high-efficiency visible-light photocatalytic degradation of dyes

Novel Synthesis Strategy for Z-scheme BiOCl/UiO-66 Photocatalyst: Enhanced Surface Area and Improved Cr(VI) Removal Efficiency

Facile synthesis of Bi2WO6/Bi2MoO6 Z-scheme heterojunction for dye degradation and Cr(VI) reduction

Defect engineering on metal-organic frameworks for enhanced photocatalytic reduction of Cr(VI)

CdS/MoS2 Heterojunctions: Facile Synthesis and Photocatalytic Reduction of the Toxic Cr(VI) to Cr(III) Micronutrient

Green Photocatalysis of Organic Pollutants by Bimetallic Zn-Zr Metal-Organic Framework Catalyst

Single-crystalline Orthorhombic Molybdenum Oxide Nanobelts: Synthesis and Photocatalytic Properties