Abstract:Abstract Turbojet and turbofan engine propulsion system are extensively used in aircraft. Turbojets have simple engine design and extensively used for supersonic flights. Turbofan engine has high mass flow rate and efficient for subsonic application. Variable Cycle Engines, unlike the traditional engines, can vary between high thrust mode for supersonic operations and high efficiency mode for subsonic operations hence are potentially attractive for supersonic transport and advanced tactical fighter aircraft. Variable Cycle Engine can be described as the one that operates with two or more cycles, could serve as a possible solution to reconciling the necessary performance at different operating conditions. The aim of the engine is to combine the best traits of turbojet (high specific thrust) and turbofan (low specific fuel consumption, low noise). Traditional engines have fixed mass flow but VCE can alter the mass flow and function as high bypass engine for the subsonic case and low bypass engine at the supersonic case. Different variable cycle engine design philosophies were studied and the engine architecture used in F120 was incorporated into the base design of a low bypass ratio Turbofan Engine. Cycle analysis of VCE was primarily done based on theoretical calculation and parametric study performed with the use of Gasturb software. Two Variable Area Bypass Injectors (VABI) were used to vary the mass flow through the core and the bypass stream. We aspire to achieve enhanced performance at subsonic and supersonic mission segments. Subsonic, supersonic and take off conditions were decided and the base engine was modified to have multiple operating points. The VCE combines two cycles (subsonic, supersonic) in same engine body and it is crucial for the engine components to deliver the required performance at both the design points. The engine design procedure consists of the matching of components like turbine, compressor, exhaust nozzle and the exhaust mixing area. Systematic study of turbine matching for such engine configuration with multiple operating points was carried out to understand the utility of variable geometry in a VCE. For turbine matching, the mass flow through turbine was held constant by adjusting the VABIs and this was repeated for different takeoff conditions to analyses the output in detail. The non dimensional mass flow through the turbine was fixed for both the design points and hence the turbine could be designed to provide high efficiency. The fuel consumption was found to have decreased compared to the baseline condition which in turn leads to low SFC and higher endurance.

Operational Mechanism of Valved-Pulsejet Engines

Effect of Taper Angle on the Performance of Jet Pumps for a Loop-Structured Thermoacoustic Engine

Stall Margin Improvement in an Axial Compressor by Continuous and Pulsed Tip Injection

Liquid Fuel Placement and Mixing of Generic Aeroengine Premix Module at Different Operating Conditions

The Effect of Swirling Injector Geometry on the Flow Dynamics of Precessing Vortex Core

Analysis Of Synthetic Jet Piv Experiment Based On Dynamic Mode Decomposition

Effect of self-excited oscillation of three-dimensional rectangular shock-induced thrust vector nozzle jet

A model combustor for studying a reacting jet in an oscillating crossflow

Multiphysics Modeling of a Synthetic Jet Actuator in Operation

Investigation of the Jet Characteristics and Pulse Mechanism of Self-Excited Oscillating Pulsed Jet Nozzle

Parametric Study for Adoption of Variable Cycle Engine Concept for Low Bypass Ratio Turbofan Engine

Investigation of flow characteristics and velocity fields of excited two parallel plane jets

High-speed micro-actuation in a supersonic dual-stream jet flow

Computational Study of Fluidic-Valve Injectors for Detonation Engines

Enhancing the mixing characteristics of multi-hydrogen jets in scramjet engines through the implementation of fuel injection strategies and vortex generator positioning

Experimental study on acoustic resonance of subsonic and slightly underexpanded impinging jets

A nonlinear room mode determines the operating conditions of a large-cavity synthetic jet actuator at low frequencies

Experiments and modeling of a dual-mode, turbulent jet ignition engine

Jet noise of a low bypass turbofan with internal mixing and external plug

Design and experimental study on whirl aero-valve for pulse detonation engine

Jet-induced vortices of a row of distributed engines at vertical take-off condition