Abstract:Lithium sulfur batteries (LSB) can offer great opportunities for the next-generation energy storage systems required for electrical vehicles and grid energy storage applications due to its very high theoretical specific energy (2500 Wh kg −1 ). For the practical applications, the sulfur loading in the cathode should not be lower than 70wt% in order to achieve a high energy density. However, the electrical and/or ionic conductivity of the cathode can be reduced with a high S loading, respectively, leading to reduced sulfur utilization and slurry reaction kinetic. In order to overcome this issue, sulfur active species were first dissolved together with Li 2 S in the electrolyte to form lithium polysulfide (LiPolS) (e.g., Li 2 S 8 and Li 2 S 6 ) solution or catholyte. During cycling, the active sulfur (Li 2 S 8 ) is deposited from the electrolyte into the S-free cathode conductive matrix, which could be made from carbon nanotube and carbon nanofiber. It has been demonstrated that the specific/areal capacity of Li – lithium polysulfide (Li-LiPS) cells show high specific capacity, indicating high S utilization as well as high reaction kinetic. However, the problem is the penetration of dissolved LiPSs through the separator to react with the Li metal anode and reduce to form short-chain LiPSs, resulting to the passivation of the anode with irreversible deposits on its surface. In order to mitigate this problem, a lithiated-polyamic acid functionalized glass microfibers (GF@PALi) was utilized as a functional separator to selectively transfer Li + ions. The GF@PALi was prepared by simply dipping of commercial GF into aqueous solution of 5 wt% lithiated-polyamic acid and dried overnight at 60 o C in vacuum oven. Combined with CNTs on Ni foam electrode, catholyte of 0.4 M LiTFSI + 2.0 M Li 2 S 8 + 1.0 M LiNO 3 in DME/DOL and lithium anode, the fabricated LSB cell exhibits a high specific and areal capacities of 803 mAh g -1 and 2.43 mAh cm -2 at C/2 rate, respectively. In addition, the LSB cell with the GF@PALi separator presents a remarkable cycling durability until 200 cycles with 76% capacity retention, which is much more stable than the LSB cell with commercial Celgard PP separator working until 86 cycles. Such high durability could be attributed to the retarding polysulfide migration of the as-prepared GF@PALi separator. Figure 1

Optimizing structural and cycling stability in sodium-ion batteries using tailored glass fiber separators

Liquid Electrolyte Immobilized in Compact Polymer Matrix for Stable Sodium Metal Anodes

Electrically Coupled Electrolyte Engineering Enables High Interfacial Stability for High‐Voltage Sodium‐Ion Batteries

Development and Multifunctional Characterization of a Structural Sodium-Ion Battery Using a High-Tensile-Strength Poly(ethylene oxide)-Based Matrix Composite

Sodiophilic Amyloid Fibril Modified Separator for Dendrite‐Free Sodium Metal Batteries

Surface-modified composite separator for lithium-ion battery with enhanced durability and security

Supported Ionic Liquid Gel Membranes Enhanced By Ionization Modification For Sodium Metal Batteries

Chemically bonding inorganic fillers with polymer to achieve ultra-stable solid-state sodium batteries

Ion Flux Regulation through PTFE Nanospheres Impregnated in Glass Fiber Separators for Long‐Lived Lithium and Sodium Metal Batteries

A flexible and free-standing composite solid electrolyte with a pomegranate-like structure for solid-state sodium-ion batteries

Simultaneous Regulation of Organic and Inorganic Components in Interphase by Fiber Separator for High‐stable Sodium Metal Batteries

High Cycling Stability for Solid‐State Li Metal Batteries via Regulating Solvation Effect in Poly(Vinylidene Fluoride)‐Based Electrolytes

One-step Multiple Structure Modulations on Sodium Vanadyl Phosphate@carbon Towards Ultra-Stable High Rate Sodium Storage

Solvation‐tailored PVDF‐based Solid‐state Electrolyte for High‐voltage Lithium Metal Batteries

Enhanced cycle performance of lithium-sulfur batteries using a separator modified with a PVDF-C layer.

Synergy Effect of High-Stability of VS4 Nanorods for Sodium Ion Battery

Lithiated-Polyamic Acid-Coated Glass Fiber As a Functional Separator for High-Performance Li-S Batteries

Enhancing interfacial stability in solid-state lithium batteries with polymer/garnet solid electrolyte and composite cathode framework

Sandwich-structured composite separators with an anisotropic pore architecture for highly safe Li-ion batteries

A High Ceramic Loading LATP-PVDF-Al2O3 Composite Film for Lithium-ion Batteries with Favorable Porous Microstructure and Enhanced Thermal Stability

Enhancing the interfacial stability of high‐energy Si/graphite||LiNi0.88Co0.09Mn0.03O2 batteries employing a dual‐anion ionic liquid‐based electrolyte