Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Empirical model and side friction factor effect on desired operating speed at horizontal curved road

Model for Predicting Speed along Horizontal Curves on Two-Lane Highways

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

On the required complexity of vehicle dynamic models for use in simulation-based highway design

Limited Response of Curve Safety Level to Friction Factor and Superelevation Variation under Repeated Traffic Loads

Operating Speed of Different Classes of Vehicles at Horizontal Curves on Two-Lane Rural Highways

Operating Speed Models on Horizontal Curves for Two-lane Highways

Setting the Speed Limit for Highway Horizontal Curves: A Revision of Inferred Design Speed Based on Vehicle System Dynamics

F 2010-sc-0-25 integrated safety speed model for curved roads

Evaluation of design consistency on horizontal curves for two-lane state roads in terms of vehicle path radius and speed

Driver curve speed model and its application to ACC speed control in curved roads

Relationship of Design, Operating, and Posted Speeds on Horizontal Curves of Rural Two-Lane Highways in Nebraska

Variable Speed Limits on Circular Curved Road Sections under Various Weather Conditions

Modeling of vehicle carbon emissions on horizontal curve road sections

INTEGRATED SAFETY SPEED MODEL FOR CURVED ROADS

Safety evaluation of horizontal curves on two lane rural highways using machine learning algorithms: A priority-based study for sight distance improvements

Reliability-Based Design of Horizontal Curves on Two-Lane Rural Highways

Speed Changes in the Vicinity of Horizontal Curves on Two-Lane Rural Roads

Examining vehicle operating speeds on rural two-lane curves using naturalistic driving data

Simulation of road circular curve design specifications in cold regions