Abstract:Water stands at the heart of the Sustainable Development Goals, and risk management for clean water often requires in situ monitoring of contaminants, where a portable photodetector with high detectivity is highly desired. The emerging portable organic photodetectors (OPDs) with intrinsic flexibility and light weight, which are promising candidates for in situ water pollution monitoring, often exhibit unsatisfactory specific detectivity (D*) lower than 1013 Jones, failing to meet monitoring requirements set below safety limits (~0.01–0.1 mg l−1) for pollutant discharge. Here we present OPDs with D* as high as 4.1 × 1013 Jones made from dense and ordered polymer films via colloid processing, attributed to their substantially lower energy disorder and fewer traps than those deposited via traditional solution processing. Detectable light intensities as weak as approaching 0.1 pW cm−2 of colloid-processed OPDs (CP-OPDs) at visible to near-infra-red light are achieved, on par with the premium commercial Si photodiode and overwhelming some widely used models. Highly sensitive and accurate monitoring of trace dye pollutants/chlorophyllin A analogue in water with a detection limit of 0.02/0.05 mg l−1 (below the discharge/eutrophication standard) is successfully accomplished through the developed CP-OPDs, surpassing the commercial Si photodiode that cannot effectively respond to the concentration below the standard. Colloid processing endows OPDs with the highest detectivity among reported portable photodetectors and makes CP-OPDs superior in in situ monitoring trace contaminants in water relative to traditional methods. In situ real-time water pollution monitoring provides a fast and convenient way to detect water pollutants, but the development of detectors with high sensitivity is still challenging. Portable organic photodetectors fabricated with a colloid processing approach achieve highly sensitive and accurate monitoring of trace pollutants in water.

Progress of optical biosensors for analyzing pathogens and organic pollutants in water since 2015

Optical Nanosensors For Biofilm Detection In The Food Industry: Principles, Applications And Challenges

Nanomaterial-based biosensors for sensing key foodborne pathogens: Advances from recent decades.

Optical Biosensors and Their Applications for the Detection of Water Pollutants

Progress in Research on Optical Biosensor

Optical biosensors for microbial toxin detection: Recent advances and future trends

From challenge to opportunity: Revolutionizing the monitoring of emerging contaminants in water with advanced sensors

Development of biosensor technologies for analysis of environmental contaminants

Research progress on optical biosensors for pathogenic bacteria detection

Research Advances in Biosensor for Rapid Measurement of Biochemical Oxygen Demand (BOD)

Optical Biosensors: an exhaustive and comprehensive review

Recent advances in optical fiber grating sensors for detection of organic substances

Emerging Optical Materials in Sensing and Discovery of Bioactive Compounds

[Research of a Bioluminent Bacterial-Based Optical Fiber Sensor to Detecting Acute Effects of Pollutants in Water].

Recent progress in optical nanosensors for antibiotics detection

Highly Sensitive Water Pollution Monitoring Using Colloid-Processed Organic Photodetectors

Biosensors for waterborne virus detection: Challenges and strategies

Nanomaterial-enabled Rapid Detection of Water Contaminants.

Current trends in biosensors for biotoxins (mycotoxins, marine toxins, and bacterial food toxins):principles, application, and perspective

Recent advances in fiber-optic evanescent wave sensors for monitoring organic and inorganic pollutants in water

Optical lateral flow test strip biosensors for pesticides: Recent advances and future trends