Abstract:Abstract During the last 20–30 years many researchers have paid attention to the studies of properties of thewood polymer composites (WPC). A lot of works are closely related to investigations of exploitation properties of wood fibres or wood flour containing polyolefine composites [1, 2]. The most useful from wide selection of polyolefines are polypropylenes, but timber industry waste materials comprising lignocellulose fibres are often used as reinforcement of WPC [3–12]. Plywood industry is not an exception – part of waste materials (by-products) are used for heat energy, i.e. burned. In this work we have approbated reinforcing of polypropylene (PP) with one of the plywood industry by-products, such as birch plywood sawdust (PSWD),which containswood fibre fractions with different length [13]. The main fraction (50%) includes fibres with length l = 0.5 − 1 mm. Our previous study [13] has confirmed that PSWD is a promising filler for PP reinforcing. Addition of PSWD up to 40–50 wt.% has increased WPC tensile and flexural modulus, but decreased deformation ability of PP matrix, impact strength, water resistance and fluidity of composite melts. It was shown [13] that modification of the composites with interfacial modifier – coupling agent maleated polypropylene (MAPP content up to 5–7 wt.%) considerably improved all the abovementioned properties. SEM investigations also confirmed positive action of coupling agent on strengthening of adhesion interaction between components wood and PP matrix. Another way how to make better properties of the WPC is to form hybridcomposites [1, 14–24]. Very popular WPC modifiers are nanoparticle additions like organonanoclays, which increase WPC physical-mechanical properties - microhardness, water resistance and diminish barrier properties and combustibility [1, 2, 14–17, 19, 20]. The goal of this study was to investigate organonanoclays influence on plywood production industry by-product birch plywood sawdust (PSWD) containing polypropylenewood hybrid composites (WPHC) physical-mechanical and other exploitation properties.

Properties of hybrid glued-laminated timber manufactured from peeler cores

Mechanical Performance of Toothed Metal-Plate Connected Glubam Joints

Mechanical Properties of Engineered Bamboo Boards for Glubam Structures

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

An Experimental Study on Shear Strength of Glubam

Design Embedment Strength Of Plybamboo Panels Used For Glubam

Bending Performance of Glubam Beams Made with Different Processes

Production, Environmental Impact and Mechanical Properties of Glubam

Glue Laminated Bamboo (GluBam) for Structural Applications

Impact Toughness and Quasi-Static Bending Strength of Glubam

Physical and mechanical properties of laminated timbers used in the construction and furniture industry

Predicted and Experimental Bending Behaviour of Glulam Bonded by RPF Adhesive

An Experimental Study of Flexural Behavior of Glulam Beams Made out of Thermally Treated Fast-Growing Poplar Laminae.

Green-glued engineered products from fast growing Eucalyptus trees: a review

Experimental Study On Flexural Behavior Of Glulam And Laminated Veneer Lumber Beams

Compression properties of glued laminated timber and tensile properties of gluelam lamellas from oil palm wood

Some Exploitation Properties of Wood Plastic Hybrid Composites Based on Polypropylene and Plywood Production Waste

Glulam beams adhesively bonded by birch plywood plates in moment-resisting beam-to-beam connections

Bond quality of poplar plywood reinforced with hemp fibers and lignin-phenolic adhesives

Parallel strand lumber made from pine veneer

Gluing Techniques on Bond Performance and Mechanical Properties of Cross-Laminated Timber (CLT) Made from Larix kaempferi