Abstract:Anomalous small-angle X-ray scattering (ASAXS) is a technique capable of extracting element-specific structural information from multi-element materials, and is considered useful in the structure analysis of metal alloy catalyst particles for fuel cells. ASAXS utilizes the resonant term of the atomic scattering factor of the element of interest. The resonant term has a real part (f1) and an imaginary part (f2), and f1 mainly contributes to the anomalous scattering phenomenon. The amplitude of f1 varies with X-ray energy, and decreases sharply around the absorption edges of the element. The decrease is as large as -18 electrons in the case of platinum (Pt) LIII-edge. ASAXS experiments are possible only in synchrotron radiation facilities where X-ray energies are freely tunable. ASAXS experiments require X-ray recordings at 3 or more different X-ray energies to mathematically isolate the element-specific component. Although the energy dependence of f1 seems substantial at around the absorption edge, its contribution to the total scattering intensity from a multi-element system is subtle, and high-precision measurements are required to obtain correct structural information. In actual measurements, experimental errors can arise from many sources, even in present-day third-generation synchrotron radiation facilities. They include fluctuations of the X-ray beam intensities and positions, the calibration error of X-ray energies, and time-dependent changes of sample properties. Here we evaluate the effect of such errors by using model calculations. The model consists of a mixture of 3-nm Pt particles and 5-nm gold (Au) nanoparticles. The scattering profiles of this mixture were calculated for X-ray energies of 11.504, 11.555 and 11.560 keV (Curve A in Figure 1. The LIII edge is at 11.564 keV). The scattering amplitude of the Pt particles was calculated by using the f1 and f2 values from the Cromer-Liberman tables (Brennan & Cowan, Rev. Sci. Instr., 63, 1992), using equations described by Sanada et al. (J. Am. Chem. Soc., 135, 2013). The scattering from Au particles (Curve B) was assumed to be independent of energy. The extracted scattering profile for Pt was identical to that calculated for a sample with Pt particles alone (Curve D, compare with C). Next, the scattering intensities at a specific energy were deliberately changed by a few percent before extracting the Pt contribution. For intensities at 11.56 keV, even a reduction of as slight as 0.2% resulted in catastrophic consequences (Curve F). With a 5% increase of intensity, the generated Pt profile superficially looked normal, but in reality the scattering curve retained the features of the Pt-Au mixture, meaning that the Pt-specific component was not successfully extracted (Curve D). These results indicates that the accuracy requirements in ASAXS measurements are very stringent, and every effort should be made to eliminate factors that can cause errors and uncertainties. In the meeting, data recorded from actual catalyst samples will also be presented, including those from MIRAI (fuel-cell vehicle manufactured by Toyota). This work was performed under the NEDO FC-Platform project. Figure 1

Small Angle X‐Ray Scattering Study for Investigating the 3D Packing Structure of Pt Catalysts on Gd‐Doped CeO2 Supports for Fuel Cells (Adv. Theory Simul. 2/2024)

Synchrotron Radiation in Situ X-ray Absorption Fine Structure and in Situ X-ray Diffraction Analysis of a High-Performance Cobalt Catalyst Towards the Oxygen Reduction Reaction

Atomic-Scale Compositional Mapping and 3-Dimensional Electron Microscopy of Dealloyed PtCo3 Catalyst Nanoparticles with Spongy Multi-Core/Shell Structures

Structural Evolution of Supported Pt Atoms During Calcination Using Electron Atomic Pair Distribution Function: Implications for Catalysis

Fuel Cells: 3D Quantification of Low‐Coordinate Surface Atom Density: Bridging Catalytic Activity to Concave Facets of Nanocatalysts in Fuel Cells (Small 46/2016)

Real-time Dynamics and Structures of Supported Subnanometer Catalysts Via Multiscale Simulations

Practical chemical analysis of Pt and Pd based heterogeneous catalysts with hard X-ray photoelectron spectroscopy

Revealing the Nanostructure of Mesoporous Fuel Cell Catalyst Supports for Durable, High-Power Performance

Carbon-supported Platinum Electrocatalysts probed in a Gas Diffusion Setup with Alkaline Environment: how Particle Size and Mesoscopic Environment influence the Degradation Mechanism

Theoretical Study on Pt1/CeO2 Single Atom Catalysts for CO Oxidation

Interface Engineering of Pt/CeO2-{100} Catalysts for Enhancing Catalytic Activity in Auto-Exhaust Carbon Particles Oxidation

Anomalous Small-Angle X-Ray Scattering of Fuel-Cell Catalyst Samples

Atomic-resolution spectroscopic imaging of ensembles of nanocatalyst particles across the life of a fuel cell

Fluxional Behavior at the Atomic Level and its Impact on Activity: CO Oxidation over CeO$_{2}$-supported Pt Catalysts

Unveiling the Degradation of Pt/NbOx/C Catalysts in PEMFCs via In Situ X-ray Absorption Spectroscopy

Investigating the Dynamics of Pt/CeO2 Catalysts at the Powder Agglomerate Scale by Combining in situ Hyperspectral Raman imaging and SEM‐EDX Analysis

Atomic-Level Insight into Advanced Electrocatalyst Architectures

Exploring the Facet-Dependent Structural Evolution of Pt/CeO2 Catalysts Induced by Typical Pretreatments for CO Oxidation

An Amorphous Approach to the Structure of a Pt–Fe/γ-Al2O3 Catalyst Characterized by XAFS

A Theory-Guided X-ray Absorption Spectroscopy Approach for Identifying Active Sites in Atomically Dispersed Transition-Metal Catalysts.

Pushing the Performance Limit of Cu/CeO2 Catalyst in CO2 Electroreduction: A Cluster Model Study for Loading Single Atoms.