Abstract:Chlorides, sulfates, and heavy metals are the three main factors preventing the recycling of municipal solid waste incineration (MSWI) fly ash as an alternative material for cement clinker production, of which chloride plays the main role due to its extremelly hign content in fly ash. This study evaluated three wet-based pretreatment methods (water-washing, CO 2 -aided washing, and flue gas-aided washing) to remove chlorides using MSWI fly ashes from 13 incineration plants in China. Water washing was suitable for removing Cl - from MSWI fly ash containing a limited amount of less-soluble Cl-containing salts (Ca(OH)Cl, Ca 2 Al(OH) 6 (H 2 O) 2 Cl, and Ca 6 (CO 3 ) 2 (OH) 7 Cl). However, for fly ash with a significant proportion of these less-soluble Cl-containing salts, injection of CO 2 /flue gas during washing promoted their decomposition and increased the chloride removal rates by 2–12%. Compared with chloride, the removal rate of sulfate was lower under all treatment scenarios and ranged from 7% to 47%. Therefore, caution should be taken when exploring techniques for the deep removal of chloride from MSWI fly ash, as sulfates may be the limiting factor in fly ash samples with low chloride contents when utilizing the fly ash for cement clinker production. Heavy metals in fly ash were not a limiting factor for any ash samples (either raw ash or treated ash) when utilizing the fly ash for clinker production. However, the dissolution of heavy metals in the washing solution deserves more attention, as a large amount of wastewater will be generated during wet-based pretreatment methods. This study confirmed that CO 2 /flue gas injection during washing promoted the removal of the less-soluble harmful components of fly ash, expanding the applications of ash materials.

Experimental research on the gaseous PbCl 2 adsorption by thermal alkali modified coal fly ash

Geochemical mechanism of lead vapors over fly ash cenospheres in simulated flue gas

Silica aluminum xerogel-based sorbent for removal of volatilized PbCl2 during the incineration: Improvement on mass-transfer limitations via high porosity

Adsorption of heavy metal ions using zeolite materials of municipal solid waste incineration fly ash modified by microwave-assisted hydrothermal treatment

Efficient Activation of Coal Fly Ash for Silica and Alumina Leaches and the Dependence of Pb(II) Removal Capacity on the Crystallization Conditions of Al-MCM-41

Synthesis of porous materials by the modification of coal fly ash and its environmentally friendly use for the removal of heavy metals from wastewater

Reduction of heavy metal emissions by adding modified attapulgite to sludge in bubbling fluidized bed incineration process

Stabilization of lead in waste water and farmland soil using modified coal fly ash

Coupling of alkaline and mechanical modified fly ash for HCl and SO 2 removal in the municipal solid waste incineration plant

Effect of Chlorine-Containing Compounds on Evaporation of Heavy Metals in Secondary Gasification of Fly Ash from Municipal Solid Waste Incinerator

Adsorption of Copper Ions by Fly Ash Modified Through Microwave-Assisted Hydrothermal Process

Preparation of adsorbent from coal gasification slag for the treatment of waste water from lanchar and its adsorption mechanism

Experimental and DFT studies on the characteristics of PbO/PbCl2 adsorption by Si/Al- based sorbents in the simulated flue gas

Pb stabilization in fresh fly ash from municipal solid waste incinerator using accelerated carbonation technology

[Effects of adsorbents on partitioning of Cd and Pb in MSW incineration]

Mild Hydrothermal Synthesis of 11Å-TA from Alumina Extracted Coal Fly Ash and Its Application in Water Adsorption of Heavy Metal Ions (Cu(II) and Pb(II))

Effect of CaCl2 addition on heat treatment of heavy metals in municipal solid waste incineration fly ash

A Study on the Mechanisms of Coal Fly Ash to Improve the CO2 Capture Efficiency of Calcium-Based Adsorbents

Promotion of chloride removal from MSWI fly ash by an accelerated wet-carbonation process to enhance ash recycling in cement manufacture

A novel approach to prepare efficient CO2 sorbents derived from alumina-extracted residue of coal ash

Experimental study on coal-fired flue gas HCl removal by injecting adsorbent into flue duct