Development and validation of a novel home-made bench-top training model for retrograde intrarenal surgery

Jingfei Teng,Chong Ma,Feng Gao,Xiao Luo,Yawei Guan,Zhihui Li,Li Yao,Xing Ai

DOI: https://doi.org/10.1007/s00345-023-04728-x

2024-01-21

World Journal of Urology

Abstract:To develop and validate a low-cost homemade bench-top training model to facilitate retrograde intrarenal surgery (RIRS) training.

urology & nephrology

What problem does this paper attempt to address?

Design and Validation of a Novel 3D-Printed Retrograde Intrarenal Surgery Trainer

Jeff John,Johan Bosch,Ahmed Adam,Graham Fieggen,John Lazarus,Lisa Kaestner

DOI: https://doi.org/10.1016/j.urology.2024.06.061

IF: 2.633

Urology

Abstract:Objective: To report on the design of a novel 3D-printed retrograde intrarenal surgery (RIRS) benchtop trainer and detail its validation against real-life experiences. Methods: Digital Imaging and Communications in Medicine (DICOM) files of 2 patients with normal computed tomography of the kidney and bladder were converted into stereolithography files to create 3D triangular mesh models. These images were further refined using Autodesk Meshmixer. These 3D models were fabricated through additive manufacturing, a process commonly known as 3D printing, and assembled in a polypropylene case. After development, the model was validated by 40 experienced urologists and urology residents in their final year of training. They were asked to rate the components of the simulation using a 9-point questionnaire. Results: The model's value in understanding the principles of RIRS and simulating contextual anatomy had mean scores of 9.43 (standard deviation [SD] = 0.74) and 9.21 (SD = 1.03), respectively. Mean scores for specific steps in RIRS were 8.07 (SD 1.47) for cannulating the ureteric orifice, 8.61 (SD 1.24) for inserting the ureteric access sheath, 9.29 (SD 0.97) for performing a renoscopy and evaluating all the calyces, 9.46 (SD 0.87) for laser lithotripsy, and 9.17 (SD 0.94) for manual stone retrieval. Participants scored the model with a mean score of 9.04 (SD 0.87) regarding realism and a mean score of 9.18 (SD 0.89) when evaluating its ability to enhance a trainee's confidence in RIRS. Conclusion: The model performed well for all components of RIRS. This model allows high fidelity of the simulation and is cost-effective, portable, durable, reusable, and compatible with standard ureteroscopes.
Retrograde Intrarenal Surgery for the Treatment of Renal Stones: is Fluoroscopy-Free Technique Achievable?

Yonghan Peng,Bin Xu,Wei Zhang,Ling Li,Min Liu,Xiaofeng Gao,Yinghao Sun

DOI: https://doi.org/10.1007/s00240-015-0760-x

2015-01-01

Urolithiasis

Abstract:The aim of this study was to present the safety and efficacy of retrograde intrarenal surgery (RIRS) procedures that minimize the intraoperative radiation exposure. The totally endoscopy-guided RIRS technique included the following steps: (a) preoperative assessment of pelvicaliceal system anatomy and stone characteristics, (b) thorough evaluation of the ureters by rigid ureteroscopy, (c) a step-wise approach of introducing the ureteral sheath, (d) gathering stones in the more accessible renal calyx before fragmenting them, and (e) a modified holmium laser technique. The RIRS procedures performed by a single surgeon between October 2012 and October 2013 in consecutive patients with renal stones were retrospectively reviewed. The mean stone size was 1.4 ± 0.4 (range 0.8–2.0) cm. The median operative time was 74.5 min. Fluoroscopy was only used in one patient who had a double collecting system with two ureters. The stone-free status was achieved in 134 (95.7 %) patients one month after surgery. Five (3.6 %) patients had minor complications, including hematuria and fever. No major intraoperative complication was observed. We believe that with appropriate preparation, RIRS without fluoroscopic guidance can be safely and efficiently performed by experienced urologists in selected patients with renal stones.
Bilateral Renal Ischemia-Reperfusion Model for Acute Kidney Injury in Mice

Junni Wang,Huanhuan Zhu,Jin Miao,Weiqiang Lin,Fei Han

DOI: https://doi.org/10.3791/65838(2024)

2024-01-01

Abstract:Acute kidney injury (AKI) is defined as a rapid decline in renal function, in which persistent kidney dysfunction gradually progresses to chronic kidney disease (CKD) due to the irreversible loss of nephrons and their maladaptive repair. In recent years, the incidence of AKI has been increasing concerning diverse etiologies, including volume depletion, sepsis, nephrotoxicity, muscle injury, and major trauma, in which ischemia-reperfusion injury (IRI) accounts for most episodes. Development of the IRI model in mice is induced by surgical clamping of the renal pedicles, which provides powerful and controllable tools for preclinical models of AKI. Importantly, the IRI model is deployed at different stages of the AKI development, especially in the processes of AKI to CKD. Despite the IRI model being widely practiced in many laboratories, a series of variables still influence the results of this model. Here, we describe the procedure of IRI model development to provide a repeatable and reliable method for researchers to explore the underlying pathogenesis in the development of AKI and the progression of AKI to CKD.
Validation of a Novel Non-Biological Bench Model for the Training of Percutaneous Renal Access

Yi Zhang,Cheng-fan Yu,Shi-hua Jin,Ning-chen Li,Yan-qun Na

DOI: https://doi.org/10.1590/s1677-5538.ibju.2014.01.13

2014-01-01

Abstract:Purpose: The percutaneous renal access (PRA) is the most critical step of percutaneous renal surgery (PRS). For the training of PRA in the lab, a novel non-biological bench model was developed and set for validation test. Materials and Methods: Experts in PRS (> 60 cases) and novices were included to perform fluoroscopy guided PRA on the model. Overall time, X-ray exposure time and puncture attempts were recorded to establish construct validity. After accomplishment, the experts rated the model using a standardized questionnaire for face and content validity based on a 5-point Likert scale, with 1 denoting very bad and 5 as excellent. Baseline and post-training data of novices were analyzed for skill acquisition. Results: 9 experts and 30 novices were finally included. The overall appraisal was 4 by the experts, and consensus of all experts was reached for the model as an excellent training tool. Significant difference between experts and novices was detected with the experts using less total time 183.11 ± 29.40 vs. 278.00 ± 50.30 seconds (P < 0.001), shorter X-ray exposure time 109.22 ± 19.93 vs. 183.13 ± 38.83 seconds (P < 0.001), and fewer attempts 1.28 ± 0.44 vs. 2.35 ± 0.65 (P < 0.001). After training, the novices demonstrated significant skill improvement in total and fluoroscopy time, and number of attempts (P < 0.001). Conclusions: Our non-biological model provides a new method for PRA training. The face, content and construct validity were demonstrated. This model allows contact with PRA skills and could be applied to the first step in the learning curve.
Novel Biologic Model for Percutaneous Renal Surgery Learning and Training in the Laboratory

Yi Zhang,Tong-Wen Ou,Han-Guo Jia,We Gao,Xin Cui,Jiang-tao Wu,Gang Wang

DOI: https://doi.org/10.1016/j.urology.2008.05.016

IF: 2.633

2008-01-01

Urology

Abstract:OBJECTIVES:To improve the learning and training of percutaneous renal access and intrarenal procedures with a biologic porcine kidney model.METHODS:We set up a biologic bench model using a porcine kidney. The kidney was wrapped in a full-thickness skin flap with subcutaneous fascia and muscle and fixed to a wooden board with 2 long steel nails. The ureter was catheterized to inject radiologic contrast medium or normal saline. Percutaneous renal manipulations were then practiced on the model under radiographic or ultrasound guidance.RESULTS:Urologists with "partial" experience in advanced endourologic surgery were trained using this model. Of the 33 trainees practiced the percutaneous hands-on manipulations on this model, 20 (60.6%) attained success in performing the whole percutaneous procedure. One to three percutaneous access tracts were established successfully on each kidney practiced on. Of the 42 attendants, 36 (85.7%) rated this model for simulation as "very helpful" or "helpful."CONCLUSIONS:The porcine kidney model we developed is simple and easy to build with readily available materials. It provides realistic and reproducible practice for percutaneous renal surgery in the laboratory.
Design and utilisation of a novel, high-fidelity, low-cost, hybrid-tissue simulation model to facilitate training in robot-assisted partial nephrectomy

Stefanie M Croghan,Miroslav Voborsky,Adam F Roche,Claire Condron,Dara A O'Keeffe,Barry B McGuire

DOI: https://doi.org/10.1007/s11701-024-01857-2

2024-03-01

Abstract:Robot-assisted partial nephrectomy (RAPN) has rapidly evolved as the standard of care for appropriately selected renal tumours, offering key patient benefits over radical nephrectomy or open surgical approaches. Accordingly, RAPN is a key competency that urology trainees wishing to treat kidney cancer must master. Training in robotic surgery is subject to numerous challenges, and simulation has been established as valuable step in the robotic learning curve. However, simulation models are often both expensive and suboptimal in fidelity. This means that the number of practice repetitions for a trainee may limited by cost restraints, and that trainees may struggle to reconcile the skills obtained in the simulation laboratory with real-world practice in the operating room. We have developed a high-fidelity, low-cost, customizable model for RAPN simulation based on porcine tissue. The model has been utilised in teaching courses at our institution, confirming both feasibility of use and high user acceptability. We share the design of our model in this proof-of-concept report.
Training for Percutaneous Renal Access on a Virtual Reality Simulator.

Zhang Yi,Yu Cheng-fan,Liu Jin-shun,Wang Gang,Zhu He,Na Yan-qun

DOI: https://doi.org/10.3760/cma.j.issn.0366-6999.20121669

IF: 6.133

2013-01-01

Chinese Medical Journal

Abstract:Background The need to develop new methods of surgical training combined with advances in computing has led to the development of virtual reality surgical simulators. The PERC Mentor(TM) is designed to train the user in percutaneous renal collecting system access puncture. This study aimed to validate the use of this kind of simulator, in percutaneous renal access training. Methods Twenty-one urologists were enrolled as trainees to learn a fluoroscopy-guided percutaneous renal accessing technique. An assigned percutaneous renal access procedure was immediately performed on the PERC Mentor(TM) after watching instruction video and an analog operation. Objective parameters were recorded by the simulator and subjective global rating scale (GRS) score were determined. Simulation training followed and consisted of 2 hours daily training sessions for 2 consecutive days. Twenty-four hours after the training session, trainees were evaluated performing the same procedure. The post-training evaluation was compared to the evaluation of the initial attempt. Results During the initial attempt, none of the trainees could complete the appointed procedure due to the lack of experience in fluoroscopy-guided percutaneous renal access. After the short-term training, all trainees were able to independently complete the procedure. Of the 21 trainees, 10 had primitive experience in ultrasound-guided percutaneous nephrolithotomy. Trainees were thus categorized into the group of primitive experience and inexperience. The total operating time and amount of contrast material used were significantly lower in the group of primitive experience versus the inexperience group (P=0.03 and 0.02, respectively). Conclusions The training on the virtual reality simulator, PERC Mentor(TM), can help trainees with no previous experience of fluoroscopy-guided percutaneous renal access to complete the virtual manipulation of the procedure independently. This virtual reality simulator may become an important training and evaluation tool in teaching fluoroscopy-guided percutaneous renal access.
A Novel Ex Vivo Model for Percutaneous Renal Surgery

QIU Zhi,SUN Yu-cheng,ZHANG Yi,CUI Xin,WANG Gang,ZHANG Xiao-chun

DOI: https://doi.org/10.3760/cma.j.issn.1000-6702.2011.05.019

2011-01-01

Abstract:Objective To lessen the learning curve of percutaneous renal lithotripsy(PCNL),we introduced a novel ex-vivo learning and training model for PCNL under fluoroscopy and ultrasonography-guided access. Methods The model was set up nailing an adult porcine kidney with＞3 cm ureter (freshly removed from the slaughtering factory),with a full thickness flap of the thoracic wall or abdomen wall with two ribs,to a board.The porcine kidney was placed within the flap with the catheterized ureter outside.The kidney was enclosed by the flap so as to create a roodel for percutaneous renal surgery;with the ribs overlying the upper portion of the kidney.The model was fixed to the board by two nails.Artificial stone material was implanted in the renal pelvis.Fluoroscopy guidance access:Retrograde pyelography via injection of contrast medium into the ureteral catheter images the collecting system. After the long axis of the target calyx is identified,the C-arm is rotated 30 degrees toward the surgeon,placing the C-arm axis in the same posterior plane of the kidney.The needle is advanced in the plane of the fluoroscopic beam,and the appropriate needle placement is determined by obtaining a "bull's-eye sign" on the fluoroscope screen. Rotating the C-arm to a vertical position monitors the depth of the needle penetration. Ultrasonography guidance access:The renal pelvis can he filled with normal saline through a catheter to simulate hydronephrosis and the target calyx is identified under ultrasonography guidance.The tract dilation and stone disintegration were followed.After training,the kidney can be opened to examine the target calyx and the complication of dilation. Results Altogether,126 urologists attended a urologic endoscopic technique training course.Of the 126 trainees,104 (82.5%) successfully performed the whole percutaneous procedure.At the end of training,114 (90.5 %) of the 126 attendees rated the porcine kidney model for simulation of percutaneous renal surgery as "very helpful" or "helpful".Conclusions This biological training model simulates realistically the clinical procedure of PCNL with respect to trainee experience in a low stress environment that provides an opportunity for repetitive performances in order to learn basic technical skills for the clinical procedure of PCNL in the future.
CT-Video Matching for Retrograde Intrarenal Surgery Based on Depth Prediction and Style Transfer

Honglin Lei,Yanqi Pan,Tao Yu,Zuoming Fu,Chongan Zhang,Xinsen Zhang,Peng Wang,Jiquan Liu,Xuesong Ye,Huilong Duan

DOI: https://doi.org/10.3390/app11209585

2021-01-01

Applied Sciences

Abstract:Retrograde intrarenal surgery (RIRS) is a minimally invasive endoscopic procedure for the treatment of kidney stones. Traditionally, RIRS is usually performed by reconstructing a 3D model of the kidney from preoperative CT images in order to locate the kidney stones; then, the surgeon finds and removes the stones with experience in endoscopic video. However, due to the many branches within the kidney, it can be difficult to relocate each lesion and to ensure that all branches are searched, which may result in the misdiagnosis of some kidney stones. To avoid this situation, we propose a convolutional neural network (CNN)-based method for matching preoperative CT images and intraoperative videos for the navigation of ureteroscopic procedures. First, a pair of synthetic images and depth maps reflecting preoperative information are obtained from a 3D model of the kidney. Then, a style transfer network is introduced to transfer the ureteroscopic images to the synthetic images, which can generate the associated depth maps. Finally, the fusion and matching of depth maps of preoperative images and intraoperative video images are realized based on semantic features. Compared with the traditional CT-video matching method, our method achieved a five times improvement in time performance and a 26% improvement in the top 10 accuracy.
Mechanical and functional validation of a perfused, robot-assisted partial nephrectomy simulation platform using a combination of 3D printing and hydrogel casting

Rachel Melnyk,Bahie Ezzat,Elizabeth Belfast,Patrick Saba,Shamroz Farooq,Timothy Campbell,Stephen McAleavey,Mark Buckley,Ahmed Ghazi

DOI: https://doi.org/10.1007/s00345-019-02989-z

2019-11-02

World Journal of Urology

Abstract:<h3 class="Heading">Introduction and objectives</h3><p class="Para">There is a scarcity of high-fidelity, life-like, standardized and anatomically correct polymer-based kidney models for robot-assisted partial nephrectomy (RAPN) simulation training. The purpose of this technical report is to present mechanical and functional testing data as evidence for utilizing a perfused hydrogel kidney model created utilizing 3D printed injection casts for RAPN simulation and training.</p><h3 class="Heading">Methods</h3><p class="Para">Anatomically correct, tumor-laden kidney models were created from 3D-printed casts designed from a patient's CT scan and injected with poly-vinyl alcohol (PVA). A variety of testing methods quantified Young's modulus in addition to comparing the functional effects of bleeding and suturing among fresh porcine kidneys and various formulations of PVA kidneys.</p><h3 class="Heading">Results</h3><p class="Para">7% PVA at three freeze–thaw cycles (7%-3FT) was found to be the formula that best replicates the mechanical properties of fresh porcine kidney tissue, where mean(± SD) values of Young's modulus of porcine tissue vs 7%-3FT samples were calculated to be 85.97(± 35) kPa vs 80.97(± 9.05) kPa, 15.7(± 1.6) kPa vs 74.56(± 10) kPa and 87.46(± 2.97) kPa vs 83.4(± 0.7) kPa for unconfined compression, indentation and elastography testing, respectively. No significant difference was seen in mean suture tension during renorrhaphy necessary to achieve observable hemostasis and capsular violation during a simulated perfusion at 120 mmHg.</p><h3 class="Heading">Conclusions</h3><p class="Para">This is the first study to utilize extensive material testing analyses to determine the mechanical and functional properties of a perfused, inanimate simulation platform for RAPN, fabricated using a combination of image segmentation, 3D printing and PVA casting.</p>

urology & nephrology
Development of a novel percutaneous digital flexible nephroscope: its use and application

Hongbo Luo,Yuan Yuan,Haibo Shi,Chuanqing Hu,Xun Hu,Linlin Luo,Cong Wang,Pengcheng Luo,Lei Wang

DOI: https://doi.org/10.1186/s12894-024-01547-z

2024-07-27

Abstract:Background: Renal calculi are one of the most frequent diseases in urology, and percutaneous nephrolithotomy (PCNL) being the gold standard for treating renal calculi larger than 2 cm. However, traditional rigid nephroscope cannot bend, presents significant limitations during PCNL. This study aims to develop a novel digital flexible nephroscope for PCNL and verify its safety and efficacy using 3D printed models and ex vivo porcine kidney models, providing new equipment for PCNL. Methods: Based on the determined technical parameters, the novel digital flexible nephroscope was manufactured. First, 3D-printed model and ex vivo porcine kidney models were utilized to simulate the PCNL procedures. Then, the traditional rigid nephroscope and the novel digital flexible nephroscope were utilized to simulate the PCNL procedures on 10 ex vivo porcine kidneys for comparison. We observed and recorded the renal calyces visualized and accessed by both the traditional rigid nephroscope and the novel digital flexible nephroscope. Results: In both the 3D printing and ex vivo porcine kidney models, the novel percutaneous digital flexible nephroscope smoothly entered the renal collecting system through the percutaneous renal tract. It freely changed angles to reach most target calyces, demonstrating significant advantages over the traditional rigid nephroscope. Conclusion: The successful development of the novel percutaneous digital flexible nephroscope allows it to be used either independently or as an adjunct in complex stone cases, providing more effective and safer surgical equipment for percutaneous nephrolithotomy.
Neph-ex: a 3D printed interventional radiology training tool for nephrostomy exchange

Li Shyan Ch'ng,Anis Shafina Mahfudz,Hakimah Azman,Mohammad Mudzakir Zainal Alam,Ernisha Saib,Nor Syahirah Rosaland,Muhammad Izzat Ahmad Sabri

DOI: https://doi.org/10.1093/bjr/tqae184

2024-11-01

Abstract:Objectives: Fluoroscopic guided procedures are a mainstay for interventional radiology (IR) procedures. Practice is needed for the novice to interpret fluoroscopic images and simultaneously perform the procedure hands-on as well as control the foot pedal to screen. We describe the development of a training simulation model which simulates the human kidney, ureter, and bladder. Methods: Stereolithography (SLA) 3D print technology using SLA resin and Anycubic SLA printer were employed. A plastic tubing was used to connect the 3D printed kidney and bladder as the ureter. This simulation model permits fluoroscopic guided filling of "pelvicalyceal system" with contrast as well as ureteric stenting, guidewire, and drainage catheter manipulation. Effectiveness of the model to attain skills for nephrostomy exchange and ureteric stenting was obtained via questionnaire from trainees prior to and after utilizing the model. Results: The 3D printing simulation model of the kidney, ureter, and bladder system enables trainees to perform nephrostomy exchange, nephrostogram, and antegrade stenting. Participants felt more confident to perform the procedures as they were more familiar with the procedure. Besides that, participants felt their wire and catheter manipulation skills have improved after using the simulation model. Conclusions: Neph-ex simulation model is safe and effective for hands-on training in improving proficiency of fluoroscopy-guided nephrostomy exchange and antegrade ureteric stenting. Advances in knowledge: As of our knowledge, there are no commercially available simulation models for fluoroscopic guided nephrostomy exchange and ureteric stent deployment. No article on nephrostomy exchange simulation model has been published before.
Creation and validation of a novel low-cost dry lab for early resident training and assessment of robotic prostatectomy technical proficiency

Kevin Kunitsky,Abhishek Venkataramana,Katherine E Fero,Jorge Ballon,Jacob Komberg,Robert Reiter,Wayne Brisbane

DOI: https://doi.org/10.1097/CU9.0000000000000192

Abstract:Purpose: To evaluate the preliminary validity and acceptability of a low-cost low-fidelity robotic surgery dry lab for training and assessing residents' technical proficiency with key robotic radical prostatectomy steps. Materials and methods: Three standardized inanimate tasks were created to simulate the radical prostatectomy steps of posterior dissection, neurovascular bundle release, and urethrovesical anastomosis. Urology trainees and faculty at a single institution completed and evaluated each dry lab task. Construct validity was evaluated by comparing task completion times and Global Evaluative Assessment of Robotic Skills scores across four participant cohorts: medical students (n = 5), junior residents (n = 5), senior residents (n = 5), and attending surgeons (n = 7). Content validity, face validity, and acceptability were evaluated through a posttask survey using a 5-point Likert scale. Results: There was a significant difference in the individual and composite task completion times and Global Evaluative Assessment of Robotic Skills scores across all participant cohorts (all p < 0.01). The model was rated favorably in terms of its content validity and acceptability for use in residency training. However, model realism, compared with human tissue, was poorly rated. The dry lab production cost was less than US $25. Conclusions: This low-cost procedure-specific dry lab demonstrated evidence of content validity, construct validity, and acceptability for simulating key robotic prostatectomy technical steps and can be used to augment robot-assisted laparoscopic prostatectomy surgical training.
Simulators in urology resident's training in retrograde intrarenal surgery

Luis Otávio Amaral Duarte Pinto,Renata Cunha Silva,Helder Clay Fares Dos Santos Junior,Lívia Guerreiro de Barros Bentes,Mateus Itiro Tamazawskas Otake,Herick Pampolha Huet de Bacelar,Kátia Simone Kietzer

DOI: https://doi.org/10.1590/acb394724

2024-08-05

Abstract:Purpose: To evaluate the impact of simulators on the training of urology residents in retrograde intrarenal surgery (RIRS). Methods: The study involved training eight urology residents, using two artificial simulators; one developed by the Universidade Estadual do Pará, using three-dimensional printing technology, and the other one patented by the medical equipment manufacturer Boston Scientific The qualification of residents took place through a training course, consisting of an adaptation phase (S0), followed by three training sessions, with weekly breaks between them (S1, S2 and S3). Study members should carry out a RIRS in a standardized way, with step-by-step supervision by the evaluator using a checklist. The participants' individual performance was verified through a theoretical assessment, before and after training (pre- and post-training), as well as by the score achieved in each session on a scale called global psychomotor skill score. In S3, residents performed an analysis of the performance and quality of the simulation, by completing the scale of student satisfaction and self confidence in learning (SSSCL). Results: At the end of the course, everyone was able to perform the procedure in accordance with the standard. The training provided a learning gain and a considerable improvement in skills and competencies in RIRS, with p < 0.05. SSSCL demonstrated positive feedback, with an overall approval rating of 96%. Conclusions: Artificial simulators proved to be excellent auxiliary tools in the training of urology residents in RIRS.
[Non-biological 3D printed simulator for training in percutaneous nephro- lithotripsy]

Yu G Alyaev,E S Sirota,E A Bezrukov,S Kh Ali,M D Bukatov,A V Letunovskiy,I Sh Byadretdinov

Urologiia

Abstract:Aim: To develop a non-biological 3D printed simulator for training and preoperative planning in percutaneous nephrolithotripsy (PCNL), which allows doctors to master and perform all stages of the operation under ultrasound and fluoroscopy guidance. Materials and methods: The 3D model was constructed using multislice spiral computed tomography (MSCT) images of a patient with staghorn urolithiasis. The MSCT data were processed and used to print the model. The simulator consisted of two parts: a non-biological 3D printed soft model of a kidney with reproduced intra-renal vascular and collecting systems and a printed 3D model of a human body. Using this 3D printed simulator, PCNL was performed in the interventional radiology operating room under ultrasound and fluoroscopy guidance. Results: The designed 3D printed model of the kidney completely reproduces the individual features of the intra-renal structures of the particular patient. During the training, all the main stages of PCNL were performed successfully: the puncture, dilation of the nephrostomy tract, endoscopic examination, intra-renal lithotripsy. Conclusion: Our proprietary 3D-printed simulator is a promising development in the field of endourologic training and preoperative planning in the treatment of complicated forms of urolithiasis.
The development and evaluation of a homemade laparoscopic endotrainer using the IDEAL framework and MISTELS scoring system: a pilot study

Muhammad Usman Malik,Tara M. Connelly,Naila Akhtar Awan,Fatima Rizwan Bhatti,Rana Saddaqat Hayat,Hafiz Riaz Hussain Awan

DOI: https://doi.org/10.1111/ans.18865

IF: 1.7

2024-01-17

ANZ Journal of Surgery

Abstract:The development and evaluation of a homemade laparoscopic endotrainer using the IDEAL framework and MISTEL scoring system: a pilot study Background A prospective IDEAL stage 2a pilot study was carried out at a tertiary care center to evaluate the reliability of a homemade laparoscopic endotrainer, following the MISTEL and IDEAL framework guidelines. Methods The validated modified (MISTELS) score was used to test the reliability of a low‐cost laparoscopic trainer with commonly found components built by surgeons. Basic household materials including a cellular phone (camera source), wifi (linking source) and freely available webcam apps were used for construction. Five basic laparoscopic skills were performed by general surgery resident volunteers with minimal (1–6 months') laparoscopic surgery experience and tested and retested based on efficiency and precision. To determine interrater reliability, two trained observers scored all subjects. The Cronbach alpha test was used to test for internal consistency between tasks. The Interclass correlation coefficient is used for test and retest reliability. Results 15 (80% male, mean age 28 ± 5 years) residents were included. The interrater and test–retest reliabilities for the total scores of the basic laparoscopic skills tests were 0.952 (95% CI, 0.895–0.981) and 0.64 (95% CI, 0.35–0.77), respectively. The Cronbach Alpha for the first assessment test and retest was 0.83. The MISTELS metrics had excellent reliability, exceeding the threshold level of 0.8. Conclusion It is possible to assemble a low‐cost, reliable trainer at home to enhance laparoscopic skills during residency.

surgery
Simulation for Percutaneous Renal Access: Where Are We?

Yasser A. Noureldin,Sero Andonian

DOI: https://doi.org/10.1089/end.2016.0587

2017-04-01

Journal of Endourology

Abstract:OBJECTIVES: Percutaneous renal access (PCA) is a challenging step during percutaneous nephrolithotomy. The aim of this study is to review the literature for different types of simulators described for PCA.METHODS: Databases of Medline, Embase, Cochrane Library, OvidSP, and Google Scholar were systematically searched until May 2016. The studies were analyzed regarding the type of simulator (nonbiologic, biologic, live animal, and virtual reality [VR]), type of validity (face, content, construct, and predictive), cost-effectiveness, and whether these simulators have been used for training and/or assessment of PCA. In addition, the study looked at the educational impact of these simulators in terms of the transfer of PCA skills to the operating room.RESULTS: Several bench, animal, and VR simulators for training in PCA were identified. Only few studies were found on assessment of PCA skills. Biological bench models used porcine or bovine kidneys wrapped within foam, silicone, chicken carcass, or full-thickness skin flap alone. Other biological models used additional subcutaneous fascia, muscle, or ribs. Nonbiological models used prototypes, including 3D printing. Only one study reported the use of anesthetized live pig for training. The PERC Mentor™ was the only VR simulator, which has been validated for training and assessment of PCA skills. However, none of these studies assessed the educational impact of PCA simulators. Furthermore, most of the studies did not address the validity and the cost of the simulator.CONCLUSIONS: While several biological and nonbiological PCA models exist, there is paucity of literature regarding the validity and educational impact of these simulators. The PERC Mentor simulator is the sole validated simulator for training and assessment of PCA skills. However, it is expensive and there is little evidence of its educational impact. Therefore, more research is needed to validate the available simulators and assess their educational impact for urology trainees.

urology & nephrology
Chicken RAPS: Chicken Robot-assisted Pyeloplasty Simulation. Validation Study of a Novel Chicken Model for Wet Laboratory Training in Robot-assisted Pyeloplasty

Nikolaos Liakos,Rudolf Moritz,Sami-Ramzi Leyh-Bannurah,Özlem Güner,Jörn H. Witt,Christian Wagner

DOI: https://doi.org/10.1016/j.euros.2022.10.014

IF: 3

2022-11-10

European Urology Open Science

Abstract:Background Since the introduction of minimally invasive surgery, the number of simulation models available for teaching new surgeons has continued to increase. Objective To evaluate and validate use of a model for teaching robot-assisted pyeloplasty. Design, setting, and participants Twenty simulated robot-assisted pyeloplasty procedures were performed by experienced ( n = 4) and novice ( n = 16) surgeons using a chicken crop model at two different training centers using third- and fourth-generation robotic systems. Outcome measurements and statistical analysis We evaluated the time needed to perform the procedure, and the sufficiency and patency of the anastomosis. Participants rated the efficiency, face validity, and possible acceptance of the model as part of a structured curriculum on a scale from 0 to10. Statistical significance for comparison of results was set at p < 0.05. Results and limitations Robot-assisted pyeloplasty was successfully performed by 75% of the participants. The completion time was significantly higher in the novice group ( p = 0.016). The model was deemed to be similar to the human ureteropelvic junction by the novice group. Both groups regarded the model as a useful simulation task as part of a standardized training curriculum, with mean scores of 6.5 versus 8.69 ( p = 0.046) for face validity and 8 versus 9.25 for acceptance ( p = 0.053) reported by the experienced versus novice group, respectively. Limitations of the study are the costs associated with the robotic system and the unequal number of participants in the groups. Conclusions The chicken crop model is a low-cost and reproducible simulation model for accomplishing both the resection and reconstructive steps during the learning phase for robot-assisted pyeloplasty. Patient summary We assessed the use of chickens as a model for practicing a robot-assisted operation called pyeloplasty to fix narrowing of the ureter (the tube that drains urine from the kidney to the bladder) where it attaches to the kidney. This model can be used for simulation of robot-assisted pyeloplasty when training new robotic surgeons.

urology & nephrology
Low cost silicone renal replicas for surgical training - technical note

T Smektala,A Goląb,M Królikowski,M Slojewski

Abstract:Objective: The aim of this brief report was to present and evaluate workflow of preparation of lowcost individual silicone replicas of kidneys for laparoscopic training and surgical simulation of difficult nephron sparing surgeries. Methods: The work flow consists of four steps: 1.Image segmentation; 2.Casting mould designing; 3.Manufacturing of casting mould; 4.Silicone replica casting. To evaluate the cost and time required to execute the presented method, authors prepared 5 silicone models for 5 consecutive patients undergoing laparoscopic kidney tumorectomy due to renal cell cancer. Results: Average times of image segmentation, casting mould design, casting mould printing and pouring of silicon replicas were 94 min, 22 min, 14 h and 30 min, respectively. Average costs of casting mould printing and casting of silicon replica were 14.4$ and 7.4$ respectively. Conclusion: The presented technique is simple to perform and beyond basic 3D printer it does not require any other expensive equipment. The final silicone model reproduces shape and elasticity of the living organ and has similar mechanical strength. These properties of silicone replica in combination with the presented technique can be used to prepare other artificial organs, ready for a simulation of treatment.
A novel intrarenal multimodal 2D/3D registration algorithm and preliminary phantom study

Zuoming Fu,Ziyi Jin,Chongan Zhang,Peng Wang,Hong Zhang,Xuesong Ye

DOI: https://doi.org/10.1002/acm2.14084

2023-07-12

Journal of Applied Clinical Medical Physics

Abstract:Retrograde intrarenal surgery (RIRS) is a widely utilized diagnostic and therapeutic tool for multiple upper urinary tract pathologies. The image‐guided navigation system can assist the surgeon to perform precise surgery by providing the relative position between the lesion and the instrument after the intraoperative image is registered with the preoperative model. However, due to the structural complexity and diversity of multi‐branched organs such as kidneys, bronchi, etc., the consistency of the intensity distribution of virtual and real images will be challenged, which makes the classical pure intensity registration method prone to bias and random results in a wide search domain. In this paper, we propose a structural feature similarity‐based method combined with a semantic style transfer network, which significantly improves the registration accuracy when the initial state deviation is obvious. Furthermore, multi‐view constraints are introduced to compensate for the collapse of spatial depth information and improve the robustness of the algorithm. Experimental studies were conducted on two models generated from patient data to evaluate the performance of the method and competing algorithms. The proposed method obtains mean target error (mTRE) of 0.971 ± 0.585 mm and 1.266 ± 0.416 mm respectively, with better accuracy and robustness overall. Experimental results demonstrate that the proposed method has the potential to be applied to RIRS and extended to other organs with similar structures.

radiology, nuclear medicine & medical imaging

Development and validation of a novel home-made bench-top training model for retrograde intrarenal surgery

Design and Validation of a Novel 3D-Printed Retrograde Intrarenal Surgery Trainer

Retrograde Intrarenal Surgery for the Treatment of Renal Stones: is Fluoroscopy-Free Technique Achievable?

Bilateral Renal Ischemia-Reperfusion Model for Acute Kidney Injury in Mice

Validation of a Novel Non-Biological Bench Model for the Training of Percutaneous Renal Access

Novel Biologic Model for Percutaneous Renal Surgery Learning and Training in the Laboratory

Design and utilisation of a novel, high-fidelity, low-cost, hybrid-tissue simulation model to facilitate training in robot-assisted partial nephrectomy

Training for Percutaneous Renal Access on a Virtual Reality Simulator.

A Novel Ex Vivo Model for Percutaneous Renal Surgery

CT-Video Matching for Retrograde Intrarenal Surgery Based on Depth Prediction and Style Transfer

Mechanical and functional validation of a perfused, robot-assisted partial nephrectomy simulation platform using a combination of 3D printing and hydrogel casting

Development of a novel percutaneous digital flexible nephroscope: its use and application

Neph-ex: a 3D printed interventional radiology training tool for nephrostomy exchange

Creation and validation of a novel low-cost dry lab for early resident training and assessment of robotic prostatectomy technical proficiency

Simulators in urology resident's training in retrograde intrarenal surgery

[Non-biological 3D printed simulator for training in percutaneous nephro- lithotripsy]

The development and evaluation of a homemade laparoscopic endotrainer using the IDEAL framework and MISTELS scoring system: a pilot study

Simulation for Percutaneous Renal Access: Where Are We?

Chicken RAPS: Chicken Robot-assisted Pyeloplasty Simulation. Validation Study of a Novel Chicken Model for Wet Laboratory Training in Robot-assisted Pyeloplasty

Low cost silicone renal replicas for surgical training - technical note

A novel intrarenal multimodal 2D/3D registration algorithm and preliminary phantom study